光纤直接耦合微加工型可调光衰减器

设计研制了一种新型小体积, 低成本的光纤直接耦合微加工型可调光衰减器. 该器件采用电磁微线圈驱动柔性框架上的活动光纤微位移实现信号功率衰减变化, 驱动电压为0~8 V, 工作范围0~65 dB, 动态时间响应小于2.3 ms. 器件构造工艺主要使用了CNC高精度雕刻和激光点焊封装技术. 利用有限元单元法进行器件理论分析, 并报告了其测试性能.     

Dependence of stresses on grain orientations in BCC polycrystalline films on substrates

Most thin films have different thermal expansion coefficients from their substrates, thus thermal stresses will be introduced into the films when the temperature is changed during annealing and service. Calculations of these stresses for grains in various crystallographic orientations have been made for seven BCC transition metals Cr, Fe, Mo, Nb, Ta, V and W. Neglecting W, which is isotropic and the stresses are equiaxial and without grain orientation （hkl） dependence, the BCC metals may be grouped into two classes. In the first class （Cr, Mo, Nb and V）, the （100）-oriented grains have the largest stresses, while the stresses σ1 and σ2 in other （hkl）-oriented grains decrease linearly with the increase of the angle between （hkl） and （100）, and with σ1 〈 σ2 except in （100）- and （lll）-oriented grains. In the second class （Fe and Ta）, on the contrary, the （100）-oriented grains have the lowest stresses, and the stresses σ1 and σ2 in other （hkl）-oriented grains increase linearly with the increase of the angle between （hkl） and （100）, and with σ1 〉 σ2 except in （100）- and （111）-oriented grains.     

带有STC功能的接收机中频组件的设计

本文介绍了带有STC功能的接收机中频组件的设计,它动态范围宽,输出饱和电平大,选择性好,响应时间快.同时,对系统的电磁干扰加以讨论,并介绍了抗干扰的有效措施.     

Ni、Co/AAO纳米有序阵列复合结构光吸收特性的比较研究

在多孔阳极氧化铝(AAO)模板中分别沉积金属镍(Ni)、钴(Co),制备了Ni／AAO和Co／AAO纳米有序阵列复合结构,对其光吸收特性进行了比较研究。实验结果表明．相同结构参量的模板中,Ni、Co纳米粒子的表观形状随沉积时间的变化规律基本一致．但Co/AAO及Ni／AAO复合结构的光吸收特性却有较大差异。Ni／AAO复合结构表现出间接带隙半导体的光学特征．而Co／AAO复合结构具有直接带隙半导体的光学特征。同时,随金属沉积量的增加,Ni／AAO吸收边的红移量仅约为13nm．而Co/AAO复合结构的吸收边红移量却超过了80nm。用Maxwell-Garnett(M-G)理论分析了导致二者光吸收特性存在较大差异的主要原因。     

Giant magnetocurrent in triple-barrier ferromagnetic resonant-tunneling diode with different magnetization configurations

The authors theoretically investigate a triple-barrier ferromagnetic resonant-tunneling diode composing nonmagnetic couple wells and three GaMnN magnetic barriers, in which two kinds of antiparallel configurations are formed by changing the relative orientation of magnetization in the barriers. Based on a two-band model, the achievement of large magnetocurrents in the resonant bias regime is proposed under an optimal magnetization configuration. The magnetocurrents in both antiparallel configurations of triple-barrier system are much higher than that in double-barrier structure.     

A new subdivision method for grating-based displacement sensor using imaging array

A new subdivision method for grating-based displacement sensor was proposed in the present study, which takes advantages of imaging array's high resolution and pixels’ good uniformity in the space. In this method, the magnified grating image is received by imaging array and grating pitch is directly subdivided by pixels, which is quite different from that moiré fringe is subdivided by complex subsequent circuits in moiré-type displacement sensor. The displacement is statistically calculated by using the whole grating image, which greatly eliminates the errors arising from illumination, electrical signals’ fluctuation, grating defect, and so on. Therefore, the subdivision method is easy to obtain signal with high signal-to-noise ratio, insensitive to some external factors, and able to attain high measurement precision with low cost. In this paper, the principle of subdivision method was illuminated, the systemic resolution was theoretically discussed, the measurement precision was experimentally checked, and the uncertainty of measurement was analyzed. The subdivision system consisted of the grating with 20-μm pitch and the CMOS image sensor with the pixels of 1280×1024 had the resolution of 0.04 μm, and the maximum displacement error was less than 0.4 μm, which has been tested in the Abbe comparator platform.     

Time-resolved measurement of atomic emission enhancement by fs--ns dual-pulsed laser-induced breakdown spectroscopy

Time-resolved measurement of atomic emission enhancement is performed by using a 500-fs KrF laser pulse incident upon a high density supersonic O_{2} gas jet, synchronized with an orthogonal ns frequency-doubled Nd:YAG laser pulse. The ultra-short pulse serves as an igniter of the gas jet, and the subsequent ns-laser pulse significantly enhances the atomic emission. Analysis shows that the contributions to the enhancement effect are made mainly by the bremsstrahlung radiation and cascade ionization.     

金溶胶中邻羟基苯甲酸吸附行为的密度泛函理论与实验研究

研究了邻羟基苯甲酸(OHBA)的常规拉曼散射(NRS)光谱以及其吸附在Au纳米颗粒上的表面增强拉曼散射(SERS)光谱。以氯金酸为原料,柠檬酸三钠为还原剂,用化学还原法制备了球形的金纳米粒子溶胶,采用激光显微拉曼光谱仪(激发波长为785 nm),测定OHBA分子的NRS光谱及其吸附在Au纳米颗粒上的SERS光谱。同时,应用密度泛函理论(DFT),在B3LYP/6-31+G**(C,H,O)/LANL2DZ(Au)水平上,对OHBA分子进行了结构优化,在此基础上计算了OHBA分子的NRS光谱以及其吸附在Au纳米颗粒上两种不同吸附构型下的SERS光谱,并和实验值进行比较。结果表明,OHBA分子通过羧基吸附构型的计算值比通过羟基吸附构型的计算值与实验值符合的更好。最后,利用GaussView可视化软件对其振动模式进行了全面归属。通过对邻羟基苯甲酸分子拉曼谱峰的详细指认能够得出：Au溶胶中的邻羟基苯甲酸分子,是通过羧基倾斜地吸附在Au纳米颗粒表面的。可视化软件直观形象地展示出了该分子的结构特征和分子基团振动情况,对其振动峰位的归属提供了重要依据。本文工作对推进邻羟基苯甲酸在生物医药等领域进一步的应用具有重要作用。     

小波图像融合在太赫兹无损检测中的应用

玻璃纤维增强复合材料被广泛应用于航天、航空及其他军民各领域,它在制备和使用过程中通常会出现多个缺陷。太赫兹时域光谱成像技术有望成为玻璃纤维增强复合材料无损检测的有力补充手段。在太赫兹时域光谱成像过程中,可以选取时域或频域波形中的不同参数来进行成像。对于不同的缺陷,能够有效地对其进行检测的参数是不一样的。采用基于小波分解的图像融合方法将多幅不同参数获取的太赫兹反射图像结合起来,得到一幅包含所有缺陷信息的新图像。研究表明,基于小波分解的图像融合方法在太赫兹无损检测中的应用,能够获取单一参数成像无法检测的缺陷信息,为复合材料太赫兹图像后期处理提供了新的技术方法。     

Synthesis and Characterization of TiO2 Doped ZnO Microtubes

以氯化锌和硫酸钛为原料,通过湿化学法成功制备了钛掺杂氧化锌微米管. 以粉末X射线衍射仪、场发射扫描电子显微镜、光致发光系统对样品进行了表征. 结果表明,未经掺杂的氧化锌微管具有良好的六方中空结构. 在TiO₂/ZnO比率小于5%时,钛掺杂和未掺杂氧化锌管具有相近的尺度,外表光滑,近于圆柱形. 当TiO₂/ZnO比率大于5%时,生成一种由ZnO, Ti₃O₅和TiO组成的多相混合物. 钛掺杂氧化锌在光催化降解甲基橙溶液效果明显.