A spectroscopic study on the 12-heteropolyacids of molybdenum and tungsten (H3PMo12−nWnO40) combined with cetylpyridinium bromide in the epoxidation of cyclopentene

The epoxidation of cyclopentene with hydrogen peroxide catalyzed by 12-heteropolyacids of molybdenum and tungsten (H₃PMo_12−nW_nO₄₀, n = 1–11), 12-tungstophosphoric acid and 12-molybdophosphoric acid combined with cetylpyridinium bromide as a phase transfer reagent was carried out in acetonitrile. Among 13 heteropolyacids investigated, catalyst of H₃PMo₆W₆O₄₀ showed the highest activity, giving a conversion of 60% and a selectivity of 95% in the epoxidation of cyclopentene. The fresh catalysts and the catalysts under reaction condition were characterized by UV–vis, FT-IR and ³¹P NMR spectroscopy, which has revealed that all of the molybdotungstophosphoric acids were degraded in the presence of hydrogen peroxide to form a considerable amount of phosphorus-containing species. The active species resulted from H₃PMo₆W₆O₄₀ are new kinds of phosphorus-containing species, which is different from {PO₄[WO(O₂)₂]₄}³⁻.     

La2O3-Mo5Si3/MoSi2复合材料的高温氧化行为

研究了0．8％La2O3-MosSi3／MoSi2复合材料在1200℃空气中的高温氧化行为。结果表明：0．8％稀土和MoSi3的加入，使材料的抗氧化性能降低。MosSi3含量越高，材料的抗氧化性能越差。当MosSi3含量低于30％时，在氧化初始阶段，质量变化呈直线下降，随着氧化的进行，氧化逐渐增重，材料表面形成较致密的SiO2阻止了材料的进一步氧化，使得氧化增重较小。而0．8％La2O3-40％Mo5Si3／MoSi2复合材料却出现了“粉化”现象。0．8％La2O3．MosSi3／MoSi2复合材料抗氧化性能的降低，归因于Mo5Si3差的抗氧化性和材料致密度的降低；另外，稀土和Mo5Si3的加入，细化了材料的晶粒，使晶界面积增加，加速了氧在晶界中的扩散，促进了材料的氧化。     

自动化流动注射停流动力学分析仪的研制及其性能测试

本文研制了一套自动化流动注射停流动力学分析仪，该仪器由苹果Ⅱ型微机通过１２位ＡＤ／ＤＡ卡，流动注射停流控制仪及用ＢＡＳＩＣ语言编制的软件控制泵的起动和停止，试样的输送和混合，数据采集和处理，结果显示和打印，通过以铁（Ⅲ）与硫氰酸盐的反应体系采用固定时间法和以钒（Ｖ）的胶束催化反庆体系采用安始速法的现场测试证明，该仪器具有结构简单，操作方便，恒温性能好，通用性强等特点。     

SA耐火材料多晶结构与性能的研究

本实验采用磨具废砂和炉皮SiC废砂生产SA耐火材料，通过XRD分析和计算机处理确定各试样中的晶相（4H－SiC，33R－SiC，3C－SiC，α－Al2O3，β-石英和Al6Si2O13）及其各相的含量。通过材料性能与结构综合分析，确定较好的配方，其含量：磨具废砂50％，炉皮砂45％，结合剂5％，外加矿化剂2％。     

在位分散聚合聚甲基丙烯酸甲酯/二氧化硅纳米复合材料研究

应用在位分散聚合方法制备了分散相粒径介于１３０ｎｍ左右的聚甲基丙烯酸甲酯／二氧化硅ＰＭＭＡ／ＳｉＯ２纳米复合材料，并利用ＳＥＭ，ＤＭＡ，ＴＧＡ等手段研究了该体系的性能．结果表明，经表面处理的ＳｉＯ２无机填料在复合材料基体中分散均匀，界面粘结好．ＳｉＯ２填充粒子的用量对基体的热稳定性，动态力学行为，光学行为以及拉伸强度，弹性模量，断裂伸长率等力学性能都有较大影响     

Nonequilibrium solid phase formation studied by lattice dynamics calculation and ion beam mixing in an immiscible Co-Ag system

For the equilibrium immiscible Co-Ag system, a proven realistic ab initio derived n-body potential is applied to study the nonequilibrium solid phase formation at three chemical stoichiometries of Co/Ag = 1:3, 1:1, and 3:1. To predict the structural stability, the elastic constants and the phonon spectra are calculated at the chosen stoichiometries with a total of eight hypothetical crystalline structures. The calculated results suggest that four compounds, that is, D0(3) CoAg3, B1 CoAg, B2 CoAg, and D0(3) Co3Ag, are unstable, as they all feature negative elastic constants as well as imaginary phonons, and that another four compounds of both fcc-type L1(2) and hcp-type D0(19) structures at chemical stoichiometries of Co/Ag = 1:3 and 3:1, respectively, may elastically be favored and therefore obtainable under some specific conditions. It is also found that all the calculated elastic constants and phonon spectra are coincident within the framework of the elastic theory. Moreover, the calculated elastic constants are in good agreement with those acquired directly from ab initio calculations, lending support to the validity of the ab initio derived n-body Co-Ag potential as well as its resultant elastic constants and the phonon spectra. Interestingly, some of the predicted nonequilibrium solid phases, that is, two hcp-type compounds at chemical stoichiometries of Co/Ag = 1:3 and 3:1, respectively, are indeed obtained in ion beam mixing experiments and their lattice constants determined by diffraction analysis are in good agreement with those from calculations.     

The anion sequence in the phase transformation of mesostructures templated by non-ionic block copolymers

A p6m to Ia3d mesophase evolution is achieved by simply adjusting the acidity and/or anion species in the presence of block copolymers; the unusual anion sequence that affects the phase behavior of block copolymer templated mesostructured solids is revealed to be SO(4)(2-)(HSO(4)(-)) > NO(3)(-) > Br(-) > Cl(-).     

1''-苯基-3''-甲基-5''-氧代吡唑-4''-基乙醛酸希土配合物的合成及性质研究

本文采用电导、pH滴定法研究了乙醇-水溶液中希土与1′-苯基-3′-甲基-5′-氧代吡唑-4′-基乙醛酸(简称H₂A)的配位反应.合成了15种新的希土固态配合物.通过元素分析、化学分析、水份分析确定了配合物的化学组成为RE(HA)₃·nH₂O(RE=Ce、Pr、Sm、Tm、Lu、n=1;RE=La、Nd、Eu、Gd、Tb、Dy、Ho、Er、Yb、Y,n=1-2).并对配合物的红外光谱、核磁共振谱、热稳定性、紫外光谱、溶解性及摩尔电导进行了测定.