光纤环形镜线形腔掺Er3+光纤激光器输出特性的数值分析

在分析光纤环形镜工作原理的基础上,给出了基于光纤环形镜的线形腔掺Er3+光纤激光器相位和幅度的振荡条件.通过求解速率方程,理论分析了其输出特性,获得了稳态条件下激光器输出功率、阈值泵浦功率和斜率效率的解析表达式.推导出激光器工作所需掺Er3+光纤最短长度,并在给定泵浦光功率时,在特定输出波长上获得最大输出功率所需最佳掺Er3+光纤长度的表达式,且通过实验进行了验证.     

Two-pump fiber optical parametric amplifiers using optimized photonic crystal fiber by genetic algorithm

In this paper, we investigate the gain spectra of fiber optical parametric amplifiers (FOPAs) consisting of dispersion-flattened fibers (DFFs) with different dispersion curves comparatively by means of the dispersion curve model of the DFFs. It is demonstrated that the broader gain spectrum of FOPAs can be achieved if the dispersion curve is lower and more flattened. Based on the preceding analyses, we propose to constitute FOPAs by using index-guiding photonic crystal fiber (PCF) with an anticipated ultra-flattened dispersion and ultra-low dispersion slope. The as-proposed PCF had different air-holes in the cladding rings. In total, four parameters of the PCF are optimized by using genetic algorithm. PACS 42.81.-i; 42.65.Hw; 42.65.Yj     

Quantum noise property in coherent atomic system

The coherent superposition of atomic states leads to the characteristic change of interacting lights because of the coupling between the lights and atoms. In this paper, the noise spectrum of the quantified light interacting with the atoms is studied under the condition of electromagnetically induced transparency (EIT). It is shown that the noise spectrum displays a double M-shape noise profile resulted from the conversion of phase noise of probe beam. A squeezing of 0.3 dB can be observed at the detuning of probe light at the proper parameters of atoms and coupling beam.     

钐(Ⅱ)类卡宾CH_3SmCH_2X(X=Cl、Br和Ⅰ)促进乙烯环丙烷化反应途径的理论研究(英文)

用密度泛函B3LYP方法研究了过渡金属钐类卡宾与乙烯的环丙烷化反应的机理。对三种不同的钐的SS试剂CH_3SmCH_2X(其中X=Cl、Br和Ⅰ)分别和CH_2CH_2反应的各反应物、中间体、过渡态和产物构型的全部结构几何参数进行了优化,用内禀反应坐标(IRC)计算和频率分析方法,对过渡态进行了验证。结果表明：CH_3SmCH_2X(其中X=Cl、Br和Ⅰ)与CH_2CH_2环丙烷化反应按亚甲基转移通道(通道A)和卡宾金属化通道(通道B)都可以进行,与锂类卡宾的反应机理相同,只是按亚甲基转移通道(通道A)进行反应较容易一些,而且此反应在较低的温度下就可以发生。     

The Quantum Coherence Effects in Degenerate Two-level Atomic System

The quantum coherence effects of the transition Fe = 2←→Fg = 3 depending on the polarization of the coupling and probe beam are observed in a Cs vapor cell. The splitting of electromagnetically induced transparency （EIT） window is observed when the degeneracy of two-level system is broken using a magnetic field. It is also shown that the splitted transparency points of two of three windows are shifted with the intensity of magnetic field （ i. e. Zeeman splitting in the upper and lower levels ） increasing. On the contrary, when we fix the intensity of magnetic field, and increase the Rabi frequency of the coupling beam, the splitted transparency peaks become wider. A qualitative agreement between experiment and theory is found.     

Growth and characterization of model oxide catalysts

Oxide catalysts are frequently used to convert toxic species to environmentally benign molecules, and to prevent the formation of toxic species in the first place. In this paper, growth and characterization of model oxide systems employed in both approaches is discussed. An example of the former approach is the selective catalytic reduction (SCR) of NO emitted from power plants by NH₃, which employs tungsten and vanadium oxides supported on the anatase polymorph of TiO₂. To model SCR catalysts, epitaxial titanium, vanadium and tungsten oxide films were grown using molecular beam epitaxy and magnetron sputtering. Two different anatase orientations were grown on LaAlO₃ substrates and their interactions with vanadia were characterized. On LaAlO₃ (0 0 1), anatase exposed a (4 × 1) reconstructed (0 0 1) surface. Vanadia lifted the reconstruction and at 1 ML a (1 × 1) surface with mostly V⁵⁺ was observed. Continued V₂O₅ growth led to loss of order, but at high temperatures epitaxial VO₂ could be grown; vanadia behaved similarly on anatase films on LaAlO₃ (1 1 0). Results suggested that the monolayer is pseudomorphic with O adsorption oxidizing the surface V to 5+, since the anatase structure cannot accommodate more bulk oxygen, only a monolayer can be pseudomorphic and have only V⁵⁺. Thus the vanadia monolayer has unique structural and chemical properties that can help explain why vanadia monolayers on TiO₂ are much more active than bulk V₂O₅. For WO₃, a series of added row reconstructions were observed as the epitaxial films were reduced. The effect of these structures on surface chemistry was characterized by studying 1-propanol adsorption. The results indicated that the structure of the WO₃ surface did not alter its catalytic function but had a strong effect on reaction kinetics. As an example of a system where catalysts prevent the formation of toxic species, the reactivity of oxidized Pd surfaces used in CH₄ catalytic combustion were studied. An ordered PdO-like monolayer was found to be less reactive towards CO than adsorbed O on Pd. On the other hand, the PdO layer favored a lower activation energy C₃H₆ oxidation pathway. The results indicated that Pd oxidation reduces the sticking coefficient of reactive species but once molecules adsorb, the oxide surface can reduce the activation energy for subsequent reaction.     

La掺杂对Bi4Ti3O12薄膜铁电性能的影响

利用Sol-Gel法在Pt/Ti/SiO2/Si衬底上制备出Bi4Ti3O12和Bi3.25La0.75Ti3O12薄膜,研究了La掺杂对Bi4Ti3O12薄膜的晶体结构、铁电性能和疲劳特性的影响,发现La掺杂没有改变Bi4Ti3O12薄膜的基本晶体结构,并且提高了Bi4Ti3O12铁电薄膜的剩余极化值和抗疲劳性能,对La掺杂改善Bi4Ti3O12铁电薄膜性能的机理进行了讨论.     

Fabrication of polymer compound microlens by lens-on-lens microstructures

We proposed a novel method for fabricating polymer compound microlenses (PCMLs) using micro-inkjet technique and subsequent curing process. Two different types of PCMLs with sandwich microstructure (PDMS-Glycerol-PDMS), concave and convex PCMLs, have been designed and fabricated in experiments. Convex PCML has two real images and two foci. The concave PCML has one real and one virtual focal planes, which can generate one real image and one virtual image respectively. Moreover, the diameter of concave PCML can be controlled by adjusting the curing time and temperature. The proposed method is simple, efficient and suitable for realizing large-scale high numerical aperture PCMLs array, which has potential applications in diverse optical systems such as optical storage and three-dimensional imaging.     

光折变晶体LiNbO_3:Fe中的特殊散射现象

用柱面透镜把经针孔滤波器扩束的激光束沿某一个方向聚焦成细丝状(或长条状),细丝状光束垂直入射到LiNbO_3:Fe晶体上,在远场位置观察散射光.我们发现光散射的方向与晶体的c轴方向不一致,不仅沿着晶体的c轴方向有散射光出现,沿光束的条形方向也出现很强的散射光.     

飞秒激光加工蓝宝石超衍射纳米结构

蓝宝石具有超强硬度及耐腐蚀、耐高温、在紫外-红外波段具有良好的透光性等优点,在军工业以及医疗器械方面具有广泛的应用前景.然而这些优点又对蓝宝石的机械加工或化学腐蚀加工带来困难.飞秒激光脉冲具有热损伤小、加工分辨率高、材料选择广等特点,被广泛应用于固体材料改性和高精度三维微纳器件加工.本文提出了利用飞秒激光多光子吸收特性在蓝宝石表面实现超越光学衍射极限的精细加工.利用聚焦后的波长为343 nm的飞秒激光,配合高精密三维压电位移台,实现激光焦点和蓝宝石晶体的相对三维移动,在蓝宝石晶体衬底上进行精确扫描,得到了线宽约61 nm的纳米线,纳米线间的最小间距达到142 nm左右.利用等离子体模型解释了加工得到的纳米条纹的产生原因,研究了激光功率、扫描速度对加工分辨率的影响.最终本工作实现了超越光学衍射极限的加工精度,为实现利用飞秒激光对高硬度材料的微纳结构制备提供了参考.