用对磺基苯亚甲基硫代若丹宁为显色剂固相萃取光度法测定环境样品中痕量汞

合成了新试剂对磺基苯亚甲基硫代若丹宁(SBDTR),并用红外光谱、核磁共振氢谱和元素分析鉴定其结构.试验表明:在 pH 3.5 的 HOAc-NaOAc 缓冲介质中,吐温-80 存在下,SBDTR与汞反应生成 2:1 稳定络合物,该络合物可被 Waters Sep-Pak C,18 固相萃取小柱固相萃取,用乙醇洗脱后在乙醇介质中,在此络合物的吸收峰 550 nm 波长处测定其吸光度.体系的摩尔吸光率为 8.42×104L·mol-1·cm-1.汞的质量浓度在 0.1～4.0 mg·L-1 范围内符合比耳定律,应用于河水及食品试样中汞的测定,所得结果与原子吸收光谱法的测定结果相符.     

Multifunctional Antioxidants: Regenerable Radical‐Trapping and Hydroperoxide‐Decomposing Ebselenols

Regenerable, multifunctional ebselenol antioxidants were prepared that could quench peroxyl radicals more efficiently than α‐tocopherol. These compounds act as better mimics of the glutathione peroxidase enzymes than ebselen. Production of reactive oxygen species (ROS) and reactive nitrogen species (RNS) in human mononuclear cells was considerably decreased upon exposure to the organoselenium compounds. At a concentration of 25 μm , the ebselenol derivatives showed minimal toxicity in pre‐osteoblast MC3T3 cells.     

A Supramolecularly Activated Radical Cation for Accelerated Catalytic Oxidation

Tuning the activity of radicals is crucial for radical reactions and radical‐based materials. Herein, we report a supramolecular strategy to accelerate the Fenton reaction through the construction of supramolecularly activated radical cations. As a proof of the concept, cucurbit[7]uril (CB[7]) was introduced, through host–guest interactions, onto each side of a derivative of 1,4‐diketopyrrolo[3,4‐c]pyrrole (DPP), a model dye for Fenton oxidation. The DPP radical cation, the key intermediate in the oxidation process, was activated by the electrostatically negative carbonyl groups of CB[7]. The activation induced a drastic decrease in the apparent activation energy and greatly increased the reaction rate. This facile supramolecular strategy is a promising method for promoting radical reactions. It may also open up a new route for the catalytic oxidation of organic pollutants for water purification and widen the realm of supramolecular catalysis.     

FeCl3‐Catalyzed Ring‐Closing Carbonyl–Olefin Metathesis

Exploiting catalytic carbonyl–olefin metathesis is an ongoing challenge in organic synthesis. Reported herein is an FeCl₃‐catalyzed ring‐closing carbonyl–olefin metathesis. The protocol allows access to a range of carbo‐/heterocyclic alkenes with good efficiency and excellent trans diastereoselectivity. The methodology presents one of the rare examples of catalytic ring‐closing carbonyl–olefin metathesis. This process is proposed to take place by FeCl₃‐catalyzed oxetane formation followed by retro‐ring‐opening to deliver metathesis products.     

First‐Principles Study on Doping of SnSe2 Monolayers

Doping is a vitally important technique that can be used to modulate the properties of two‐dimensional materials. In this work, by using first‐principles density functional calculations, we investigated the electrical properties of SnSe₂ monolayers by p‐type/n‐type and isoelectronic doping. Substitution at Sn/Se sites was found to be easy if the monolayer was grown under Sn‐/Se‐poor conditions. Substitutions at Sn sites with metallic atoms (e.g. Ga, Ge, In, Bi, Sb, Pb) resulted in positive substitution energies, which indicated that they were not effective doping candidates. For substitutions at Se sites with nonmetallic atoms, no promising candidates were found for p‐type doping (e.g., N, P, As). Among these, N and As showed positive substitution energies. Although P had a negative substitution energy under Sn‐rich conditions, it introduced trap states within the band gap. For n‐type doping (e.g., F, Cl, Br), all the calculated substitution energies were negative under both Sn‐ and Se‐rich conditions. Br was proven to be a promising candidate, because the impurity introduced a shallow donor level. Finally, for isoelectronic doping (e.g., O, S, Te), the intrinsic semiconducting features of the SnSe₂ monolayer did not change, and the contribution from the impurity to the states near the band edge increased with the atomic number.     

Bimetallic Au2Cu6 Nanoclusters: Strong Luminescence Induced by the Aggregation of Copper(I) Complexes with Gold(0) Species

The concept of aggregation‐induced emission (AIE) has been exploited to render non‐luminescent Cu^ISR complexes strongly luminescent. The Cu^ISR complexes underwent controlled aggregation with Au⁰. Unlike previous AIE methods, our strategy does not require insoluble solutions or cations. X‐ray crystallography validated the structure of this highly fluorescent nanocluster: Six thiolated Cu atoms are aggregated by two Au atoms (Au₂Cu₆ nanoclusters). The quantum yield of this nanocluster is 11.7 %. DFT calculations imply that the fluorescence originates from ligand (aryl groups on the phosphine) to metal (Cu^I) charge transfer (LMCT). Furthermore, the aggregation is affected by the restriction of intramolecular rotation (RIR), and the high rigidity of the outer ligands enhances the fluorescence of the Au₂Cu₆ nanoclusters. This study thus presents a novel strategy for enhancing the luminescence of metal nanoclusters (by the aggregation of active metal complexes with inert metal atoms), and also provides fundamental insights into the controllable synthesis of highly luminescent metal nanoclusters.     

H∞ stochastic synchronization for master–slave semi‐Markovian switching system via sliding mode control

In this article, synchronization problem of master–slave system with phase‐type semi‐Markovian switching is investigated via sliding mode control scheme. By utilizing a supplementary variable technique and a plant transformation, the master–slave semi‐Markovian switching system can be equivalently expressed as its associated Markovian switching system. Then an integral sliding surface is constructed to guarantee stochastic synchronization of master–slave semi‐Markovian switching system, and the suitable controller is synthesized to ensure that the trajectory of the closed‐loop error system can be driven onto the prescribed sliding mode surface. Finally, numerical simulations are presented to show the effectiveness of the proposed sliding‐mode design scheme. © 2015 Wiley Periodicals, Inc. Complexity 21: 430–441, 2016     

Schur complement‐based domain decomposition preconditioners with low‐rank corrections

This paper introduces a robust preconditioner for general sparse matrices based on low‐rank approximations of the Schur complement in a Domain Decomposition framework. In this ‘Schur Low Rank’ preconditioning approach, the coefficient matrix is first decoupled by a graph partitioner, and then a low‐rank correction is exploited to compute an approximate inverse of the Schur complement associated with the interface unknowns. The method avoids explicit formation of the Schur complement. We show the feasibility of this strategy for a model problem and conduct a detailed spectral analysis for the relation between the low‐rank correction and the quality of the preconditioner. We first introduce the SLR preconditioner for symmetric positive definite matrices and symmetric indefinite matrices if the interface matrices are symmetric positive definite. Extensions to general symmetric indefinite matrices as well as to nonsymmetric matrices are also discussed. Numerical experiments on general matrices illustrate the robustness and efficiency of the proposed approach. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of air-stable mixed bis-carboxylate titanocene complexes and their catalytic behaviors in cross-aldol and Mannich reactions

Tunable organometallic Lewis acid catalysts were developed by combining salicylic acid (H₂-Sal) with benzoic acid (H-Ben), 4-fluorobenzoic acid (H-BenF) and 3-thiophenic acid (H-Th), as coligands for mixed bis-carboxylate titanocene complexes. Three air-stable complexes [Cp₂Ti(η¹-HSal)(η¹-Ben)] (1), [Cp₂Ti(η¹-HSal)(η¹-BenF)] (2) and [Cp₂Ti[η¹-HSal][(η¹-Th)] (3) were prepared in high yields by the reaction of salicylato titanocene chelate with carboxylate ligands. The mixed bis-carboxylate titanocene complexes were fully characterized by physicochemical and spectroscopic methods. Single-crystal X-ray diffraction studies revealed Ti–O_(H-Sal) bond distances in 1, 2 and 3 of 1.972(3), 1.9245(18) and 1.912(5) Å, respectively, while the bond distances involving the coligands of 1, 2 and 3 are 1.908(3) Å (Ti–O_Ben), 1.9296(19) Å (Ti–O_BenF) and 1.945(5) Å (Ti–O_Th), respectively. These bis-carboxylate titanocene complexes showed satisfactory activities and selectivities in Mannich and cross-aldol reactions. Notably, complex 3 bearing the labile thiophene carboxylate ligand gave high yields with a diastereomer ratio (d.r.) as high as 1:99 for the direct Mannich reactions of benzaldehyde, cyclohexanone and aniline. In cross-aldol reaction of benzaldehyde and cyclohexanone, 1 and 2 successfully catalyzed the formation of double-aldol products in up to 99 % yield.     

阵列纸芯片比色法检测碱性磷酸酶

采用5-溴-4-氯-3-吲哚磷酸盐(BCIP)/氯化硝基四氮唑蓝(NBT)显色体系,构建了阵列纸芯片比色检测碱性磷酸酶(ALP)的方法.首先,借助烘干处理方式在光刻法制备的阵列纸芯片微孔中固定显色试剂,然后加入ALP进行显色反应,最后,采用凝胶成像仪和普通照相机成像,读取显色强度(灰度值)进行比色检测.详细考察了显色条件对检测结果的影响,探讨了人血清白蛋白对ALP检测的增色效应,在最佳实验条件下,ALP检测的线性范围为1.5～20 U/L,检出限(3 σ)为0.78 U/L(n=18),比文献报道中纸芯片上检测ALP方法的检出限低约两个数量级.本方法成功用于实际血清样品检测,测定结果与临床值一致.在此基础上,构建了双色阵列纸芯片,通过颜色的变化实现了ALP的可视化半定量检测.