Determination of formic and acetic acids in air by piezoelectric microweighing

The quantitative and kinetic parameters of sorption of formic and acetic acids on thin films of various modifiers of piezoelectric quartz resonator electrodes are determined. Parameters of film formation on the electrodes (application procedure and thickness) are optimized. Methods for joint and separate determination of formic and acetic acids in air by piezoelectric microweighing with single- and double-sensor devices are developed.     

Clustering study in Eu(DBM)3Phen-doped polymer optical fibers by optical properties and near-field scanning microscopy

The clusters of Eu3+ ion in Eu(DBM)3Phen-doped polymethyl methacrylate (PMMA) have been studied by three means. The relative fluorescence intensity ratio of the 5D0 → 7F2 to 5D0 → 7F1 transitions with different concentrations of Eu3+ in Eu(DBM)3Phen-doped PMMA and metastable-state (5D0) lifetime dependence on Eu3+ concentration are analyzed. The analysis indicates that there are no clustering effects in Eu3+ ions of Eu(DBM)3Phen-doped PMMA when the Eu3+ doping concentration is up to 1.0 wt.-%. At the same time, the clustering effect has not been observed by the scanning near-field optical microscopy (SNOM) in Eu(DBM)3Phen-doped PMMA with 1.0 wt.-% of Eu3+ ions. The analysis reveals that a high concentration of Eu3+ can be incorporated into polymer optical fiber (POF) without clustering effect.OCIS codes: 180.5810, 300.6280, 250.5460, 160.5690.     

Ductile–brittle transitions in the fracture of plastically deforming,adhesively bonded structures. Part II: Numerical studies

To enable the effective and reliable use of structural adhesive bonding in automotive applications, the cohesive properties of a joint need to be determined over a wide range of loading rates. In this paper, a strategy for determining these properties has been described and used to analyze a set of experimental results presented in a companion paper. In the particular system studied, a crack growing in a toughened quasi-static mode could make a catastrophic transition to a brittle mode of fracture. The cohesive parameters for both the toughened and brittle modes of crack growth were determined by comparing numerical predictions from cohesive-zone simulations to the results of experimental tests performed using double-cantilever beam specimens and tensile tests. The cohesive parameters were found to be essentially rate-independent for the toughened mode, but the toughness dropped by a factor of four upon a transition to the brittle mode. The results of wedge tests were used as an independent verification of the cohesive parameters, and to verify that the quasi-static properties remained rate-independent to very high crack velocities corresponding to conditions of low-velocity impact. The effects of friction, and the use of the wedge test to determine cohesive parameters, were also explored.     

电磁诱导透明和导致极慢光速的机制

根据有关文献 ,描述了电磁诱导透明和导致光速极慢的物理机制 ,并对实验结果也做了介绍     

Measurement of the elastic moduli of dense layers of oriented carbon nanotubes by a scanning force microscope

A technique is developed for measuring the modulus of elasticity of a material with a Nanoscan scanning force microscope on the basis of measuring the dependence of probe vibration frequency on the penetration depth of the needle into the specimen. This technique makes it possible to study materials with elastic moduli from 50 to 1000 GPa. The Young moduli of dense films of carbon nanotubes oriented at angles of 45° and 90° to the quartz substrate are measured. From their ratio, the Young modulus in the direction perpendicular to the tubes and the anisotropy of the elastic moduli are determined. A comparison of these values with the corresponding values obtained for a nanotube film deposited on a silicon substrate is carried out. On the basis of this comparison, a conclusion is made concerning the interaction between single-layer nanotubes and between nanotubes in a mixture of single-layer and multilayer ones.     

Formation of an icosahedral structure during crystallization of nickel nanoclusters

The crystallization of nickel nanoclusters is investigated using a molecular dynamics simulation with tight-binding potentials. The formation of a cluster structure depends on the cooling conditions. Slow cooling results in the formation of a face-centered cubic structure, whereas fast cooling, according to the data obtained in 40% of the simulation experiments, leads to the formation of an icosahedral structure. The molecular dynamics simulation experiments demonstrate the possibility of controlling the formation of a structure of nickel nanoclusters during crystallization.     

n维氢原子的散射态

研究了n维氢原子的散射态性质．给出了精确的按“k/2π标度”归一化的散射态的精确解波函数及相移表达式，讨论了相移的解析性质，获得了束缚-连续跃迁矩阵元的解析计算公式．普通氢原子(n=3)散射态的有关结果作为特例包含在本文的一般结论之中． 关键词： n维氢原子 散射态 精确解 相移 束缚-连续跃迁矩阵元     

Crystallographic report: Crystal structure of tetra(4‐methyl‐5‐imidazole‐carboxyaldehyde)zinc(II) diperchlorate

The central zinc(II) atom in the title complex is tetrahedrally coordinated by four nitrogen atoms derived from 4‐methyl‐5‐imidazolecarboxyaldehyde ligands with Zn? N in the range 2.007(3) to 2.026(4) Å. Copyright © 2003 John Wiley & Sons, Ltd.     

Cu-MgF2复合纳米金属陶瓷薄膜的电导特性研究

用射频磁控共溅射法制备了Cu体积分数分别为 10 % ,15 % ,2 0 %和 3 0 %的Cu MgF2 复合金属陶瓷薄膜 .用x射线衍射、x射线光电子能谱和变温四引线技术对薄膜的微结构、组分及电导特性进行了测试分析 .微结构分析表明 :制备的Cu MgF2 复合薄膜由fcc Cu晶态纳米微粒镶嵌于主要为非晶态的MgF2 陶瓷基体中构成 ,Cu晶粒的平均晶粒尺寸随组分增加从 11 9nm增至 17 8nm .5 0— 3 0 0K温度范围内的电导测试结果表明 :当Cu体积分数qM 由 15 %增加到 2 0 %时 ,Cu MgF2 复合薄膜的电阻减小了 8个量级 ,得出制备的复合薄膜渗透阈qCM 应处于 15 %和 2 0 %之间 .qM 在 10 %和 15 %之间的薄膜呈介质导电状态 ,而在 2 0 %和 3 0 %之间的薄膜则呈金属导电状态 .从理论上讨论了复合薄膜中杂质电导和本征电导的激活能及其对电导的贡献 ,并讨论了Cu MgF2 复合纳米金属陶瓷薄膜的渗透阈 ,得到了和实验一致的结果