A few points on omnidirectional band gaps in one-dimensional photonic crystals

The universal condition for the formation of omnidirectional band gaps (OBG) in photonic crystal (PC) was derived with consideration of permeability of the materials. And it was found that there are four kinds of PCs: one of them has no OBG, and one always possesses OBG. For the other two kinds of PCs, there are OBG for only TM or TE waves respectively. Moreover, in all PCs, the OBG can be broadened by decreasing the refractive index of the ambient medium or/and increasing the contrast between the wave impedances of the component materials of the PC. PACS 42.70.Qs; 71.20.Tx     

光电倍增管脉冲性能研究

采用外腔式电光开光,调制主动照相探测光源,使光电倍增管处于脉冲工作状态下,以提高光电倍增管的输出幅度和动态范围,改善信号的信噪比,同时避免样品和探测器受长时间强激光照射.对滨松H6780光电倍增管进行了调试,使其线性输出电流由静态的0.1mA提升到脉冲状态的4.4mA,信噪比提高4.5倍.该技术对其他光敏探测有借鉴意义.     

Construction of the Exact Solution to a Torsion Problem for an Elastic Shaft of Variable Cross Section

The exact solution is constructed to a torsion problem for a circular elastic shaft in a medium referred to a spherical coordinate system. One end of the shaft is rigidly fixed and the other is subjected to either tangential forces or a torque. New integral transforms are obtained to solve the problem.     

RICE CONDITION NUMBERS OF CERTAIN CHARACTERISTIC SUBSPACES

This paper proposes the Rice condition numbers for invariant subspace, singular sub-spaces of a matrix and deflating subspaces of a regular matrix pair. The first-order perturbation estimations for these subspaces are derived by applying perturbation expansions of orthogonal projection operators.     

From lag synchronization to pattern formation in one-dimensional open flow models

In this paper, the relation between synchronization and pattern formation in one-dimensional discrete and continuous open flow models is investigated in detail. Firstly a sufficient condition for globally asymptotical stability of lag/anticipating synchronization among lattices of these models is proved by analytic method. Then, by analyzing and simulating lag/anticipating synchronization in discrete case, three kinds of pattern of wave (it is called wave pattern) travelling in the lattices are discovered. Finally, a proper definition for these kinds of pattern is proposed.     

Kinetics of polarization reversal in irradiated thin PZT films

The effect of irradiation with electrons and neutrons and of exposure to synchrotron radiation on cyclic switching of polarization in thin films of lead zirconate titanate Pb(Zr,Ti)O₃ (PZT) was studied. It is shown that variations in the shape of switching currents are due to the generation of a spatially nonuniform bound internal field with account for an increase in the rate of bulk screening caused by irradiation. A correlation between structural variations and the evolution of the switching current measured during and after irradiation is established.     

Engineering issue study of triple harmonic method for in situ flying height analysis

In situ flying height testing technology is becoming more and more important in slider–disk interaction analysis and manufacturing quality control of disk drives and head-related components. Triple harmonic method is a quite promising choice for in situ flying height analysis, compared with other in situ methods reported up to now. This paper reports results of investigations on engineering issues of applying triple harmonic method for in situ flying height analysis. The paper reports results of analysis on the effects of various testing conditions on flying height testing repeatability and accuracy. Results suggest that working at reasonable high channel density and working on the ratio between third and first harmonics will be an advantage in terms of both flying height testing sensitivity and testing repeatability. Comparing with media thickness effect, the gap-length variation among different heads will be important if it is to study flying height difference among different heads and the testing is at high channel density. Also, it is suggested to work at AC erased track, in order to reduce the non-linearity caused by hard transition.     

Chemical analysis and distribution investigation of trace elements in indium matrix by spark source mass spectrometry

Summary High-purity indium was analysed by spark source mass spectrometry, using electrical and photoplate detection. For the calibration of the differences in elemental sensitivity, a standard sample was prepared in which 10 impurities were determined by graphite furnace atomic absorption spectrometry. In this way accuracies of less than 40% were obtained for relatively homogeneous elements at ppm and sub-ppm level. About 40 elements could be determined with detection limits of 10 to 30 ppb. Two pattern recognition methods, principal component analysis and clustering analysis, were applied to obtain information on trace element distribution, which indicated that a number of elements were strongly spatially correlated in the analysed sample.

---

Chemische Analyse und Verteilungsbestimmung von Spurenelementen in Indium-Matrix durch Funkenquellen-Massenspektrometrie

---

On leave from: Department of Chemistry, Nanjing Normal University, Nanjing, People's Republic of China