Fluorescent sensors for the enantioselective recognition of mandelic acid: signal amplification by dendritic branching

Novel chiral bisbinaphthyl compounds have been synthesized for the enantioselective fluorescent recognition of mandelic acid. By introducing dendritic branches to the chiral receptor unit, the fluorescence signals of the receptors are significantly amplified because of the light-harvesting effect of the dendritic structure. This has greatly increased the sensitivity of the sensors in the fluorescent recognition. Study of the three generation sensors demonstrates that the generation zero sensor is the best choice for the recognition of mandelic acid because of its greatly increased fluorescence signal over the core and its high enantioselectivity. This sensor is potentially useful for the high throughput screening of chiral catalysts for the asymmetric synthesis of alpha-hydroxycarboxylic acids.     

含有羧基配体的蝎型钒氧配合物的合成、结构及其热分解动力学

设计合成了两种新型的以聚吡唑硼酸盐、氨基酸为配体的钒氧配合物VO[phCH2CH(NH2)COO][HB(pz)3](1)和VO(3,5-Me2pz)[HB(3,5-Me2pz)3](CH3COO)(2). 通过元素分析、红外光谱对配合物进行了表征, 并利用单晶X射线衍射技术解析了它们的结构. 非等温热分解动力学研究表明, 配合物1和2的热分解反应都是分两步进行的. 通过计算, 配合物1热分解的第一步反应的可能机理为成核与生长(n=1/4); 第二步反应的可能机理为化学反应. 其非等温动力学方程分别为, dα/dT=(A/β)e-E/RT(1/4)(1-α)[-ln(1-α)]-3 和dα/dT=(A/β)e-E/RT(1-α)2. 分解反应的表观活化能分别是223.52 和331.94 kJ·mol-1; 指前因子ln(A/s-1)分别是49.67 和57.50. 配合物2 热分解的第一步反应的可能机理为化学反应; 第二步反应的可能机理为成核与生长(n=1/2). 其非等温动力学方程分别为, dα/dT=(A/β)e-E/RT(1-α)2, 和dα/dT=(A/β)e-E/RT(1/2)(1-α)[-ln(1-α)]-1. 分解反应的表观活化能分别是300.56 和444.72 kJ·mol-1; 指前因子ln(A/s-1)分别是75.53 和92.50.     

2-羟丙基三甲基氯化铵壳聚糖的制备及其性能研究

以脱乙酰度为95.37%的壳聚糖(CTS)为原料,异丙醇为溶剂,2,3-环氧丙基三甲基氯化铵为改性剂,于80℃反应12 h合成了水溶性季铵盐2-羟丙基三甲基氯化铵壳聚糖(HACC)。HACC的吸水保水性是CTS的2倍～3倍,加入化妆品中培养2周后菌落总数少于100 CFU.g-1。     

化学键合吸附剂的合成及吸附行为

在无定型硅胶上化学键合十八烷基三氯硅烷，键合率17%-20％，粒度5μm-10μm，以此键合的吸附剂可有效地吸附香烟烟气中的焦油、亚硝胺，吸附率分别为15%-18％和37%-43％，研究了化学键合吸附剂的粒度和加入量对吸附性能的影响。     

活性酚醛树脂中羟甲基含量的测定

本文提出一种酚醛树脂中羟甲基含量的化学分析法，分别以＾１３ＣＮＭＲ和化学分析法测定酚醛树脂的羟甲基含量。将两种测试结果与已知的投料量进行比较，证明所建立的化学分析法可行。     

Yb3+在不同基质中基态分裂能的计算分析

利用晶体场理论,推导出Yb3+离子基态(2F7/2)与Nd3+离子基态(4I9/2)最大分裂能之间的关系式为△E(2F7/2)=1.4667△E(4I9/2),从实验数据拟合得到的关系式为△E(2F7/2)=1.0987△E(4I9/2).理论计算与实验拟合存在差异,分析了出现差异的原因,认为差异主要是由相同晶体场对于不同掺杂离子的影响即晶体场参数Nv值不完全相同而引起的.     

Thermal Emulsion Polymerization without any Conventional Initiators and Emulsifiers

Stable poly(styrene-co-sodium styrene sulfonate) (P(St-NaSS) nanoparticles with broader size distribution were synthesized by thermal emulsion polymerization without any conventional initiators and emulsifiers. The obtained polymer nanoparticles have higher ξ potential, and the particle sizes have broad distribution. The stability of polymer particles originated from the addition of small amounts of ionic comonomer, NaSS, which can act as an emulsifier in somewhat. The monomer conversion could reach up to about 28 wt% in 48 h, and did not increase by further polymerization when higher polymerization temperature (120 ℃) was employed. This polymerization system may be give some further understand for mechanism of emulsion polymerization.     

3-氟-6-碘吡嗪-2-羧酸甲酯的合成及晶体结构

以3-氨基吡嗪-2-羧酸为原料，经酯化反应、亲电反应和重氮化反应合成了3-氟-6-碘吡嗪-2-羧酸甲酯（1），总收率62.34%，其结构经¹H NMR、¹³C NMR和MS确证，用X-单晶衍射法测定了化合物的晶体结构。结果表明：1（CCDC: 1986368）属单斜晶系，空间群C2/c，晶胞参数a=17.6566(5) Å, b=4.74850(10) Å，c=19.6368(6) Å，β=95.6540(10)°，V=1638.39(8) ų，Z=8，R_gt(F)=0.0173，wR_ref(F²)=0.0465，F(000)=1056，μ=3.885 mm^-1。      

A multireference configuration interaction method based on the separated electron pair wave functions

A multireference configurational interaction method based on the separated electron pair (SEP) wave functions, SEP‐CI approach, has been developed as an approximation to the traditional CASSCF method. It differs from the CASSCF method in that active orbitals are obtained from the SEP wave function without further optimization in the subsequent CI calculations, and the active space is automatically constructed according to the occupation coefficients of SEP natural orbitals. These features make the present SEP‐CI method computationally much less demanding than the CASSCF method. The applicability of the SEP‐CI method is illustrated with sample calculations on the insertion reaction of BeH₂ and dissociation energies of LiH, BH, FH, H₂O, and N₂. © 2005 Wiley Periodicals, Inc. J Comput Chem 27: 39–47, 2006     

过渡金属配合物催化剂及其分子设计构思的发展与相互作用

讨论了某些不对称合成和α－烯烃定向配位聚合及α－烯烃氢甲酰化的过渡金属配合物向络合催化剂的发展与催化剂分子设计构思的发展及相互促进作用，并藉以说明过渡金属配合物定向络合物催化剂的分子设计已具备向计算机辅助设计发展的科学基础。