2-乙酰基-6-甲氧基萘的多相催化氢化

乙酰基溴甲基萘;甲氧基萘基;2-乙酰基-6-甲氧基萘的多相催化氢化     

Studies on Free Radical EPR,Superoxide Dismutase Water-soluble Lipidperoxide in Tears

ＳｔｕｄｉｅｓｏｎＦｒｅｅＲａｄｉｃａｌＥＰＲ,ＳｕｐｅｒｏｘｉｄｅＤｉｓｍｕｔａｓｅＷａｔｅｒ┐ｓｏｌｕｂｌｅＬｉｐｉｄｐｅｒｏｘｉｄｅｉｎＴｅａｒｓＹＵＡＮＹｉ＊,ＺＨＡＯＳｈｉ－ｈｏｎｇ,ＹＡＮＧＳｈｏｕ,ＣＵＩＹａ－ｎａｎａｎｄＺＨＡＮ...     

HLB柱净化-高效液相色谱法分析水产品中甲基睾酮残留物

建立了水产品中甲基睾酮的高效液相色谱检测方法。样品用乙酸乙酯提取,平行蒸发仪浓缩,甲醇溶液溶解残留物,HLB柱固相萃取净化,高效液相色谱-紫外检测法分析,外标法定量。甲基睾酮质量浓度在0.02~2.0μg/mL范围内线性关系良好,R2>0.9999。添加水平在10.0,20.0,50.0μg/kg时加标平均回收率在72.8%~93.2%,RSD≤8.5%。方法适用于水产冻品中甲基睾酮残留物的测定。     

蔗渣木聚糖微观结构的分子动力学模拟

在对木聚糖来源及其结构进行分类比较的基础上,采用分子动力学模拟方法及Materials Studio 4.0软件对蔗渣木聚糖及木糖单元等进行微观模拟计算.通过原子净电荷、电子密度和Fukui函数分析等分析方法,对蔗渣木聚糖的木糖单元进行结构优化,得到了蔗渣木聚糖的木糖单元优化构型的键长、键角和电荷密度.木糖单元原子的Hirshfeld净电荷与Fukui函数分析数据表明,木糖单元的活性中心主要在C(3)上的羟基位置,且羟基氧原子易受亲电试剂的攻击,羟基氢原子易受亲核试剂的攻击.对蔗渣木聚糖单分子链及无定形结构进行模拟,得到了蔗渣木聚糖的微观结构模型,显示蔗渣木聚糖分子具有链状结构,大致呈螺旋状.获得了蔗渣木聚糖的最优化无定形结构,并通过计算得到了其最优化无定形结构的X射线衍射图谱.研究结果为系统探讨蔗渣木聚糖及其衍生物的结构与性能关系奠定了基础.     

基于铕取代多金属氧簇的手性发光液晶材料

The incorporation of europium-substituted polyoxometalate (PM) into chiral amphiphiles is attractive for the fabrication of multifunctional chiral luminescent liquid crystalline materials. Chiral amphiphiles acted as good promoters to trigger the achiral PM to show induced supramolecular chirality through electrostatic interactions, as illustrated by circular dichroism (CD) spectra. Differential scanning calorimetry (DSC), polarized optical microscopy (POM), and temperature-dependent X-ray diffraction (XRD) analysis confirmed that the organic/inorganic hybrid polyoxometalate complex exhibited thermotropic mesomorphic behaviors. In a cast film, the complex displayed intrinsic luminescence that could be adjusted by accurately controlling the temperature. The electrostatic encapsulation of PM with chiral mesomorphic promoters provides an effective method for constructing PM-based chiral luminescent liquid crystalline materials.     

染料在青霉菌上的解吸特性研究

比较了有机溶剂的加入及温度变化对染料高效吸附青霉菌(BX1)解吸染料效果的影响,并对解吸过程的动力学进行了研究.结果表明,染料的解吸效果与有机溶剂的极性,以及溶剂的官能团有关,丙酮和甲醇解吸效果最好.解吸过程与吸附过程类似,可分为快速解吸和缓慢解吸两个阶段,整个过程可用二级动力学方程较好的拟合,其表观活化能约为10.64kJ/mol.△H°和△G°的计算表明,在甲醇作用下RB19染料的解吸为吸热和自发的过程.     

LiNi0.8Co0.2O2 / MWNTs复合物超级电容器电极材料的研究

Multiwalled carbon nanotubes (MWNTs) were used as the conductive additive in the electrode materials. The electrochemical properties of supercapacitors based on LiNi_0.8Co_0.2O₂ / MWNTs composite and LiNi_0.8Co_0.2O₂/acetylene black composite and MWNTs in 1.0 mol·L^-1 LiClO₄ / EC+DEC [V(EC)∶V(DEC)=1∶1] electrolyte were investigated by means of constant charge/discharge current tests, respectively. The experimental results show that the LiNi_0.8Co_0.2O₂ / MWNTs composite has better performance than that of others, and the maximum specific capacitance of the supercapacitor can reach 271.6 F·g^-1, while the energy density is up to 339.5 Wh·kg^-1. Furthermore, it is remarkable that the performance of MWNTs is better than that of acetylene black as the conductive additive.     

Er3+，Ho3+和Tm3+在硫氧化钆中的余辉发光

The new Er^3 , Ho^3 and Tm^3 doped gadolinium oxysulfide phosphors with the long afterglow emission were synthesized by solid-state reaction method. The synthesized phosphors were characterized by X-ray diffraction. The excitation and photolumineseenee spectra, afterglow spectra and afterglow decay curve were examined by fluorescence spectroscopy. The afterglow spectra of Gd2O2S:Er^3 , Mg, Ti showed typical transitions of Er^3 at 528(2H11/2→4I15/2), 548 (^4S3/2 →^4I15/2) and 669 nm (^4F9/2→^4I15/2). In the afterglow spectra of Gd2O2S: Ho^3 , Mg, Ti,typical transitions of Ho^3 at 546 nm (^5S2→^5I8), 651 and 661 nm (^2F5→^5I8) were observed. In Gd2O2S:Tm^3 , Mg,Ti, the afterglow emission at 800 nm (^1G4→^3H5) of Tm^3 was seen. The meehnism and model of afterglow energy transfer were proposed.     

邻甲氧基苯酚锂络合物的低温红外光谱研究

由于温度的大幅度变化,分子的某些吸收带的强度将会产生明显的改变,但关于分子的红外吸收光谱与温度关系的研究尚少.在有机锂络合物的红外光谱研究中,我们发现邻甲氧基苯酚锂络合物显示了与其他锂络合物明显不同的特性^[1,2],在改变温度过程中,这种不同结构效应的特性更加明显.为此我们从+100～-130℃的较宽温度变化区域内,测定了它的变温红外光谱.     

现场热引发聚丙烯酸酯类电解质的性能及应用

应用热引发现场聚合方法制备聚丙烯酸酯类电解质,并考察其电化学性能.实验表明:该聚合物电解质具有 4. 5V的电化学稳定窗口,较高的室温电导率及良好的低温性能.当前驱体电解液中液态电解质含量为 85%时,其室温电导率为 3. 2×10-3S·cm-1, -30℃下的电导率达到 5. 6×10-4 S·cm-1.采用现场聚合技术制备的聚合物电池,其电化学性能与液态锂离子电池基本一致,首次充放电效率为 92. 1%, 1. 0C率放电容量为 0. 2C率的 95%, -20℃下的放电容量为室温容量的 72%,以 0. 5C率循环 300周后,仍保持初始容量的 85%以上.