阳离子无皂含氟丙烯酸酯的合成与表面性能

在合成甲基丙烯酸全氟辛酰氧基乙酯(FA)基础上,用半连续法制备了无皂阳离子含氟丙烯酸酯乳液。当乳液的粒径在100~200 nm、ζ电位大于40 mV时,乳液较稳定。阳离子亲水单体甲基丙烯酰氧乙基三甲基氯化铵(DMC)在含氟丙烯酸酯中质量分数为0.10~0.18、固含量小于20%时乳液的稳定性好,且随DMC含量的增加稳定性提高;含氟丙烯酸酯乳胶膜的附着力与耐磨性好,乳胶膜的透湿率随DMC的增加而增加。随热处理温度的提高,膜表面自由能下降;经160℃热处理后膜发生了交联,表面自由能为18 mN/m,与聚四氟乙烯(PTFE)的表面能相近,DMC含量对膜表面自由能影响不大。XPS分析也表明膜表面氟含量随热处理温度的提高而增加。     

系列单取代烷氧基-2-羟丙基-β-环糊精的合成与表征

以环氧氯丙烷和脂肪醇为原料, 通过相转移催化法合成了乙基、正丙基、正丁基和正戊基缩水甘油醚(1～4), 并利用所合成的缩水甘油醚和β-环糊精为原料, 分别在弱碱水溶液(1.5%)和强碱水溶液(30%)中制备并用硅胶柱分离出单2位取代的乙氧基、丙氧基、丁氧基和戊氧基-2-羟丙基-β-环糊精(1a～4a)和单6位取代的丙氧基、丁氧基和戊氧基-2-羟丙基-β-环糊精(2b～4b), 利用薄层色谱、红外光谱、差热扫描量热分析、质谱和核磁共振等手段对所合成的产品进行了表征.     

A New Amperometric Biosensor Based on HRP/Nano-Au/L-Cysteine/Poly（o-Aminobenzoic acid）-Membrane-Modified Platinum Electrode for the Determination of Hydrogen Peroxide

The third generation amperometric biosensor for the determination of hydrogen peroxide （H2O2） has been described. For the fabrication of biosensor, o-aminobenzoic acid （oABA） was first electropolymerized on the surface of platinum （Pt） electrode as an electrostatic repulsion layer to reject interferences. Horseradish peroxidase （HRP） absorbed by nano-scaled particulate gold （nano-Au） was immobilized on the electrode modified with polymerized o-aminobenzoic acid （poABA） with L-cysteine as a linker to prepare a biosensor for the detection of H2O2. Amperometric detection of H2O2 was realized at a potential of ＋20 mV versus SCE. The resulting biosensor exhibited fast response, excellent reproducibility and sensibility, expanded linear range and low interferences. Temperature and pH dependence and stability of the sensor were investigated. The optimal sensor gave a linear response in the range of 2.99×10^-6 to 3.55×10^-3 mol·L^-1 to H2O2 with a sensibility of 0.0177 A·L^-1·mol^-1 and a detection limit （S/N = 3） of 4.3×10^-7 mol·L^-1. The biosensor demonstrated a 95% response within less than 10 s.     

6-甲氧基-2-丙酰基萘在醇溶剂中的溴化反应

室温下，6－甲氧基－2－丙酰基萘和1，3－二溴－5，5－二甲基海因的溴化反应在醇溶剂中，反应速度快、转化率高，生成5－溴－6－甲氧基－2－丙酰基萘的收率高（98．59％）。     

Electrochemical Characteristics of Mg0.9Ti0.1-xZrxNi （x=0.02, 0.04, 0.06） Alloys

Mg-based hydrogen storage alloys Mg0.9Ti0.1-xZrxNi (x=0.02, 0.04, 0.06) were successfully prepared by means of mechanical alloying (MA). The effects of Zr addition on the discharge capacity and the cycle performance of the Mg-based electrodes were also studied. It was found that the discharge capacities were improved with addition of a small amount of Zr and the cycle performances of the alloy were stabilized with the addition of Ti. The effects of surface modification or coating on the properties of Mg0.9Ti0.06Zr0.04Ni were also studied. The results indicated that coating with graphite improved both the discharge capacity and cycle life of the amorphous Mg0.9Ti0.06Zr0.04Ni electrode.     

葡聚糖为载体的双亲型LDL吸附剂吸附动力学研究

合成了以葡聚为载体，同时具有亲水性磺酸基和疏水性胆固醇两类配基的新型低密度脂蛋白（LDL）吸附剂。通过对LDL纯溶液中吸附等温线的测试，比较了以Dextran G-75为载体的双亲型LDL吸附剂与单一亲水型磺酸基配基，单一疏水型胆固醇基吸附剂吸附量和亲和吸附系数的关系。对双亲型LDL吸附剂的吸附动力学进行了初步研究，在LDL溶液中，亲水型磺酸基，疏水型胆固醇配基，双亲型LDL吸附剂对LDL的吸附曲线基本上符合Langmuir吸附方程，另外通过高离子强度NaCl洗脱实验，测定了双亲型LDL吸附剂上具有的磺酸基与胆固醇两类基在对低密脂蛋白吸附过程中所起的配合效果，为下一步作用力机制研究提供了参考依据。     

有机锆交联剂的制备及其性能

随着油田深部调剖应用的不断推广，以及环保要求的提高，适用于深部调剖调驱体系的低污染有机锆交联剂逐渐受到关注。以ZrOCl₂·8H₂O、乳酸、乙二胺、硫脲为原料，制备了有机锆交联剂和HPAM-锆交联凝胶，其结构和性能经SEM和岩心驱替装置表征。并利用正交实验法优化了制备条件。结果表明：制备有机锆交联剂的最佳条件为：氧氯化锆、乳酸、乙二胺及硫脲的质量比为7.8/1/6.7/5，反应温度为70 ℃，反应时间为3 h。交联温度为60 ℃，HPAM浓度为2 g·L^-1、聚锆比为30/1时，聚合物凝胶成胶强度达到24968 mPa·s，成胶时间约8 h，凝胶体系可维持90 d不破胶。在级差为3.9的双管驱替岩心实验中，两管的岩心分流率均接近50%，剖面改善率达到66.77%。     

CoMFA 3D-QSAR Analysis of Epothilones Based on Docking Conformation and Alignment

Epothilones belong to a class of novel microtubule stabilizing and anti-mitotic agents, which have a paclitaxel-like mechanism of action. A three-dimensional quantitative structure-activity relationship （3D-QSAR） model was built for epothilones by the method of comparative molecular field analysis （CoMFA） combined with the flexible docking technology. The docking CoMFA model gave a good cross-validated value of q2=0.784 with an optimized component of 6 and the conventional correlation coefficient of r^2=0.985. The statistical results show that the model has good ability to predict the activity of the studied compounds. At last, the docking CoMFA model was analyzed through contour maps complemented with MOLCAD-generated active site potential surface in the α,β-tubulin receptor, which can provide important information for the structure-based drug design.     

吡啶酮系偶氮类化合物可见吸收光谱的预测

利用密度泛函的B3LYP方法, 在6-311G*基组水平对吡啶酮系偶氮类化合物进行构型优化, 并进行了自然键轨道(NBO)分析, 然后用TDDFT方法和ZINDO/S方法分别计算了它们的可见吸收光谱, 结果均与实验值十分吻合. 通过对比发现, 对于最高吸收波长的计算, ZINDO/S能以较快的速度得到较好的结果. 在用ZINDO/S计算的过程中, 回归分析发现π-π重叠加权因子(OWF_π-π)与染料分子吡啶环上两个羰基氧原子平均电荷Z_O有较好的线性关系: OWF_π-π＝0.11425－1.04178ZO, 这一关系不仅可从量子化学的角度进行解释, 而且可用于同类染料可见吸收光谱的预测. 分子轨道的研究表明, 这些化合物的最高可见吸收波长主要对应着共轭体系中给电子体到受电子体的电子跃迁.     

Theoretical Study on the Antioxidant Activity of Curcumin

The computational results for curcumin at the B3LYP/6-31G(d,p) level show that the enol form of curcumin is more stable than the diketo form because of an intramolecular hydrogen bond, which extends the conjugation effect in the enol chain, formed in the enol structure. Cis-diketone form can not be obtained, presumably due to the strong repulsion between the carbonyl dipoles aligned in parallel. According to the phenolic O-H bond dissociation enthalpy, curcumin in its most stable form can be suggested to be a relatively good antioxidant. In order to avoid overcoming H-bond interaction and to improve the antioxidant activity of curcumin, a catechol moiety was incorporated into curcumin for designing a novel antioxidant. It is found that the designed molecule is much more efficient to scavenge radical than curcumin, comparable to vitamin E. Moreover, the ionization potential of the designed molecule is similar to that of curcumin, indicating that the designed molecule can not display the prooxidant effect.