Prepared Low Stress Cubic Boron Nitride Film by Physical Vapor Deposition

We present low stress cubic boron nitride (cBN) films with a transition layer deposited on the metal alloy substrates by tuned substrate radio-frequency magnetron sputtering. The films were characterized by Fourier transform infrared spectroscopy and transmission electron microscopy (TEM). The IR peak position of cubic boron nitride at 1006.3 cm⁻¹, which is close to the stressless state, indicates that the film has very low internal stress. The TEM image shows that pure CBN phase exists on the surface of the film. Several phases of boron nitride were found at the medium implantation dose. It is believed that the transition from the low ordered phases to cBN phase occurred during implantation.     

Molecular Volume of Phosphates, Arsenates and Vanadates

The present paper discusses some characteristics of the molecular volumes of phosphates, arsenates and vanadates. In the salts, the volumes of per acid radical ((?)) quantitatively depend on the radii, charges, numbers of cations and anions. The functional relations between the (?) values of phosphates, arsenates, vanadates and the factors mentioned above are obtained. The molecular volumes of these salts are equal to the sum of the topological volumes of cations and anions. The authors have got a series of universally united topological volume values of cations and anions. It confirms that the topological molecular volume of the crystal water (H_2O) in the hydrates of the salts approximates to a constant, 244 (?)~3 with σ_(n-1)= 2.1. The topological volume of the hydroxide ion (OH~-) approximates to a constant too. The average value is 16.89 (?)~3 with σ_(n-1)=1.68.     

VECTORIAL ELECTRON TRANSPORT ACROSS LIPID VESICLE MEMBRANES DRIVEN BY TWO PHOTOREACTIONS. I. ETHYLENEDIAMINETETRAACETIC ACID AS AN ELECTRON DONOR via FLAVIN TRIPLET STATE IN THE INNER COMPARTMENT AND CYTOCHROME c AS AN ELECTRON ACCEPTOR FROM CHLOROPHYLL TRIPLET STATE IN THE OUTER COMPARTMENT

Negatively charged vesicle suspensions containing chlorophyll a (chl) dissolved in the lipid bilayer, flavin mononucleotide (FMN) and/or ethylenediaminetetraacetic acid (EDTA) enclosed in the inner compartment as electron sources and oxidized cytochrome c (cyt c[ox]) in the outer compartment as an electron acceptor have been studied using laser flash photolysis and steady-state irradiation methods. Cytochrome c initially quenches the chl triplet state (³chl) generating the chlorophyll cation radical (chi⁺′) in the membrane. Reverse electron transfer from cyt c(red) to chl^+. subsequently occurs in a kinetically biphasic reaction, with rate constants of 430 pT 30 and 21.9 pT 1.7 s^?1 for the fast and slow phases, respectively. In the absence of FMN, reduction of chl⁺′ by EDTA in the inner compartment can be observed during steady-state irradiation but not in a laser flash photolysis experiment. This is due to a low reaction yield, which is probably limited by the repulsive electrostatic interaction between EDTA and the negatively charged membrane. When FMN was enclosed together with EDTA in the inner Compartment, the reaction yield of vectorial electron transfer across the bilayer from EDTA to cyt c(oX) was increased by a factor of six during steadystate white light irradiation. Laser flash photolysis and steady-state irradiation experiments using red and blue light excitation have demonstrated that the enhancement mechanism involves the formation of fully reduced FMN by blue light-sensitized photooxidation of EDTA via the flavin triplet state, occumng simultaneously with red lightsensitized electron transfer to cyt c via the chlorophyll triplet state.     

吲哚衍生物与花生酸混合LB膜的制备及结构研究

本文将3-三氰基乙烯基-N-十六烷基吲哚与花生酸混合制成单分子膜。不同摩尔比混合膜的π-A曲线均出现平台,表明膜压缩过程中分子排列相态发生变化。混合LB膜的紫外吸收光谱证明吲哚分子形成聚集体,X-射线衍射结果说明这种聚集体被夹带在花生酸的框架结构中。     

PET导电纤维的制取及研究

以过氧化二苯甲酰为引发剂,使丙烯睛在涤沦(PET)纤维上接枝共聚。接枝纤维在含铜化合物,含硫还原剂溶液中反应,制备PET导电纤维。讨论了影响接枝共聚的各种因素,选择出最佳聚合条件。对该纤维的导电成份和结构以及性能进行了研究。     

COMPUTER SIMULATION OF A SINGLE POLYMER CHAIN IN DIFFERENT SOLVENTS

In the present paper, the behavior of a single polymer chain under various solvent conditions was modeled by self-avoiding walks (SAW) with nearest neighbors attraction Δε on a simple cubic lattice. Determination of the θ-condition wasbased on the numerical results of the mean square radius of gyration and end-to-end distance. It was found that at the θtemperatue Δε/kT equals -0.27. The exponents a in the Mark-Houwink equation with different interaction parameters areconsistent with the results of experiments: under θ-condition, a = 0.5, and for a good solvent α= 0.74-0.84, respectively.     

硅橡胶硫化反应场的数值模拟

以化学反应动力学原理为基础,实验确定了硅氢加成反应的动力学模型;引入 了硫化率增量的概念,获得了全量硫化率和硫化率增量的数值计算式;根据统计理 论,获得了起始分子无规分布时的交联结构参数的数值计算式;介绍了非稳态硫化 反应场的有限元模拟步骤。在此基础上,设计了硅橡胶硫化反应过程的有限元模拟 软件;应用该软件,根据输入的初边值条件,可计算任一空间点在任一时刻的交联 反应参数和交联结构参数,进而可预测制品性能、优化反应参数,或优化设计高分 子材料。最后给出了一个典型算例,并实验验证了该模拟理论及算法的合理性。     

铜(Ⅱ)-三氮唑偶氮络合物与脱氧核糖核酸相互作用的电化学行为

运用电化学方法研究了铜（Ⅱ）－三氮唑偶氮（2－[2,3,5-三氮唑偶氮]-5－二甲氨基苯甲酸，TZAMB）络合物与脱氧核糖核酸（DAN）的相互作用。在pH2.5(0.05mol/L）邻苯二甲酸氢钾（PBS）缓冲溶液中，DNA与Cu(Ⅱ）－TZAMB络合物形成一种电惰性结合物，使Cu（Ⅱ）－TZAMB络合物的还原峰电流减小。通过循环伏安法、盐效应以及紫外－可见吸收谱证实了是由Cu(Ⅱ）－TZAMB络合物与DNA形成一种插入式的电惰性结合物而使其峰电流下降。根据这种峰电流下降可以测定DNA，测定结果令人满意。     

Synthesis of Monoclinic Form of Gd2-xNaxCuO4 by Direct Precipitation from Molten Salt

Gd,-.Na.CuO#, an interesting compound with complex magnetic behavior, has beensynthesized by a PbO-based flux method (l) and a solid state reaction (2) at temperaturesabout 1000"C. Its X-ray diffraction pattern has been indexed with tetragonal latticeparameters (l,3). Here we report a low temperature synthetic route in which the newmonoclinic form of Gd,-.Na.CuO# is obtained directly by precipitation from a moltenKOH/NaOH/KNO, solution. The SEM, EDX, XRD, XPS and magnetic characte…     

Mechanics of shaft-loaded blister test for thin film suspended on compliant substrate

Based on the von Kármán plate theory, the mechanics of a shaft-loaded blister test for thin film/substrate systems is studied by considering elastic substrate deformations and residual stresses in these films. In testing, films are attached to a substrate provided with a circular hole, through which loading is applied to the film by a flat-ended shaft of circular cross-section. The effect of substrate deformation on the deflection of the loaded film is taken into account by using a line spring model. For small deflections, an analytical solution is derived, while for large deflections a numerical solution is obtained using the shooting method. The resulting load-shaft displacement relation, which is essential in blister tests, compares favorably with finite element analysis.