三维配位聚合物[Zn(HCO2)2(4,4''''-bipy)]∞的合成、晶体结构及性质研究

以ZnO,HCO_2H及4,4'-bipy(摩尔比1∶3∶1.25)溶于H_2O和DMF(体积比13∶1),并在60℃反应,合成了标题化合物[Zn(HCO_2)_2(4,4'-bipy)]_∞,对其进行了元素分析、红外光谱等表征,并测定了晶体结构.该化合物晶体属四方晶系,P4_32_12空间群,a=b=0.79675(5)nm,c=1.7627(2)nm,V=1.1190(3)nm~3,Z=4,Dc=1.850g/cm3,M_r=311.60,F(000)=632,μ=22.07cm-1,最终偏离因子R1=0.0183和wR_2=0.0483.该化合物中Zn原子和两个4,4'-bipy的N原子和四个甲酸根的O原子配位,形成的ZnN_2O_4八面体通过4,4'-bipy和甲酸根桥联,组成一种新颖的3D网络结构.同时,研究了该化合物的热性质和荧光性质.     

Molecularly imprinted solid-phase extraction of (-)-ephedrine from Chinese Ephedra

Method of molecularly imprinted solid phase extraction (MISPE) of (-)-ephedrine from Chinese Ephedra has been developed in the research. The molecularly imprinted polymer (MIP) with good selectivity and affinity for (-)-ephedrine was synthesized with (-)-ephedrine as the template, methacrylic acid as the functional monomer. The washing and elution conditions in MISPE were selected and optimized for efficient analyte extraction and sample clean-up. A clean analytical HPLC base line of ephedra extract was obtained after MISPE, which indicated that the sample pre-treatment was efficient. Good recovery and precision were obtained in the assessment for the MISPE-HPLC procedure, which demonstrated it is a reliable method and can be used for the determination of (-)-ephedrine in herbal ephedra.     

亚稳态SO(c1∑-,v''=0)的猝灭动力学

在流动余辉装置上,研究了SO(c1∑-)的猝灭动力学过程.获得了SO2,O2,CO2,N2,He,CS2,CH3OH,C2H5OH,C3H7OH,C4H9OH,CH3COCH3,C6H6 CH2Cl2,CH2Br,CHCl3,CCl4等16种分子与SO(c1∑-)发生猝灭反应的速率常数.初步分析表明:醇类分子CnH2n+1OH(n=1,2,3,4)中的C-H键的数目与其对SO(c1∑-)的猝灭速率成正比;CO2,N2等非极性无机小分子对SO(c1∑-)的猝灭作用不明显,强极性分子SO2对SO(c1∑-)的猝灭作用较强.卤代烷烃中的卤素原子的大小对SO(c1∑-)的猝灭过程发挥着较重要的作用;而氯代烷烃中氯原子的个数与猝灭速率之间的关系不明显.     

超高分子量PE凝胶膜的超拉伸性与旁式构象关系研究

通过ＩＲ方法，观测并讨论了在不同条件下制备的超高分子量ＰＥ（ＷＨＭＰＥ）凝胶膜中旁式（Ｇ构象）构象与超拉伸性的关系，提出了Ｇ构象浓度及分布对ＵＨＭＰＥ凝胶膜超拉伸性影响的新概念，同时也讨论了它与链缠结之间的联系，发现：反映Ｇ构象的相对浓度的比值σ＝Ｉ１３０３Ｉ１３５２随制膜浓度的增大而增加，在临界浓度Ｃ０（０．４～０．５ｇ＠１００ｍｌ）附近所形成的膜，具有超高拉伸性（λ＝２００），其Ｇ构象的变化与Ｍａｔｓｕｏ由比浓粘度提出的缠结链改变相对应；热处理温度比热处理时间对σ值的影响更显著，在一定温度下约４分钟后σ值基本不变；在σ值最低的温度范围拉伸，凝胶膜具有良好的超高拉伸性．     

胆甾液晶／聚合物多组分体系的结构与性能研究（Ⅲ）──ChN／poly（MMA－CO－BMA）混合体系的形态结构

应用Ｘ射线衍射、偏光显微镜及电子显微镜研究了胆甾液晶与甲基丙烯酸甲酯（ＭＭＡ）─甲基丙烯酸丁酯（ＢＭＡ）无规共聚物共混体系的形态结构。研究了体系的结晶态及液晶态的行为和共聚物含量及组成对光学织构的影响。     

A novel three-component reaction for the synthesis of new 4-azafluorenone derivatives

Reaction of arylidenemalononitriles, 1,3-indanedione, and mercaptoacetic acid or 4-methylbenzenethiol is successfully carried out using microwave heating. It is an efficient and promising synthetic strategy to build the indenopyridine skeleton.     

Preparation of flame retardant polyamide 6 composite with melamine cyanurate nanoparticles in situ formed in extrusion process

This paper is focused on in situ preparation of melamine cyanurate (MCA) nanoparticles from reaction of melamine (MEL) and cyanuric acid (CA) and their flame retardant polyamide 6 (PA6) composite in the extrusion process through a novel reactive processing method. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) were utilized to characterize the in situ formed MCA nanoparticles and their blends with PA6. Introduction of pentaerythritol (LTP) and water-bound plasticizer dioctyl phthalate (DPT) into the extrusion reaction system greatly inhibits the evaporation of water required for melamine and cyanuric acid reaction at high temperature (higher than 180 °C), laying a foundation for successful in situ preparation of MCA through reactive processing. XRD and FT-IR measurements indicate that under the effect of pentaerythritol, dioctyl phthalate and water, melamine really reacts with cyanuric acid to in situ form MCA in extrusion process. The reaction degree is close to 100%. A very important finding through SEM is that the in situ formed MCA particles, which were found to have aspect ratio of about 7.5, radial size in the range of 70-300 nm (mostly 70-90 nm) and crystallite size of less than 22 nm, are uniformly dispersed in the matrix PA6 at nanoscale. The in situ formed MCA nanoparticles greatly improve the flame retardancy and the mechanical properties of flame-retarded PA6 materials, and the introduced plasticizer dioctyl phthalate also ameliorates the related impact property. The obtained flame-retarded PA6 materials have good comprehensive performance with flame retardancy UL-94 V-0 rating at 1.6 and 3.2 mm thickness, tensile strength 48.0 MPa, elongation at break 106.3% and Izod notched impact strength 8.92 kJ/m². Compared with flame-retarded PA6 material with in situ formed MCA, the one prepared through conventional blending of PA6 with commercial MCA product has improved tensile strength but deteriorated impact strength and flame retardancy.     

Studies on the Spectral Behavior between Protein with Poniacyl Carmine 2B and its Analytical Application

In this paper, the spectral behavior of protein and Poniacyl Carmine 2B (PC 2B) has been studied by spectrophotometric method. The conditional constants, apparent combination constant K and maximum binding number n, were used to express the combination ability of the reactions between PC 2B and protein under a set of given conditions. The Sandell index s was used to express the sensitivity of the determination of protein. The factors, acidity, PC 2B concentration and the ionic strength, were discussed by the change of apparent combination constant and maximum binding number. It was found that acidity of the solution, PC 2B concentration and ionic strength had a significant effect on the sensitivity of the assay of protein. Under the optimal conditions, the apparent combination constant K and the maximum binding number n were 2.36 × 10⁶ L mol^?1 and 95, respectively. With further investigation, it was found that the Scatchard model was suitable in treating the data obtained in the experiments. In the buffer medium of HCl‐KCl at 1.87, the addition of protein made the maximum absorption of the system move from 527 nm to 513 nm. Its apparent molar absorptivity is 4.46 × 10⁵ Lmol^?1 cm^?1 at 513 nm. Beer's law is obeyed in the range of 0 ? 55 μg mL^?1. The system developed in this paper has been used for the determination of protein in milk powder successfully.     

Ru/Mn-Ce/TiO2催化剂催化湿式氧化丁二酸的反应活性和动力学研究

在二氧化钛载体中通过掺杂Ru，Mn，Ce制备了一系列用于催化湿式氧化的催化剂，利用XRD，TEM，BET等手段对催化剂进行了表征．在反应温度T=210～270℃，氧分压Po2=2．1MPa条件下，在间歇式高压反应釜中对丁二酸进行了降解实验．催化剂在反应中有很高的催化活性．催化剂在30min内对丁二酸降解的COD去除率为54．4～98．3％．Ru及Mn，Ce的氧化物对催化活性都有促进作用．建立了丁二酸催化湿式氧化的一级分段动力学模型．基于COD的一段及二段反应的活化能分别为43．74kJ／mol和54．28kJ／mol．     

MODIFICATION OF TRANSITION METAL CATIONS TO POLYMER-STABILIZED PLATINUM COLLOIDAL CLUSTERS IN ENANTIOSELECTIVE HYDROGENATION OF METHYL PYRUVATE

Modification of transition metal cations to polymer-stabilized Pt colloidal clusters modified with cinchonidine was studied in enantioselective hydrogenation of methyl pyruvate. Compared to the enantiomeric excess (e.e.) value (71.4%) obtained without the presence of metal cations, obvious e.e. enhancement (up to 82.5%) was resulted from the addition of Zn^2 but with a certain decrease in activity. The reaction parameters in the presence of Zn^2 were also studied. It was found that the Pt colloidal catalysts in the presence of metal cations performed very differently from that in the absence of metal cations.