热力膨胀阀在空气源热泵热水器系统中稳定特性的实验研究

本文对热力膨胀阀在空气源热泵热水器的稳定特性进行了实验研究.通过不同热力膨胀阀开度下的实验数据,分析了热力膨胀阀在系统中的稳定特性.分析了热力膨胀阀在空气源热泵热水器全年运行工况中存在的局限性.提出保证系统稳定运行的方法与建议;指出制冷剂充注量是系统稳定运行的另一个重要因素,只有同时很好地把握住热力膨胀阀开度和制冷剂充注量,才可能使系统运行在最佳工况.     

Magnetic Properties of Hf0.8Ta0.2（Fe0.97A0.03）2 （A=Al, Co, Mn） Systems

Moessbauer studies on the effect of substitution with 3% Al, Co, Mn atoms in the intermetallic compound of Hf0.8Ta0.2Fe2 are reported. The Al substitution leads to increase of the FM-AFM transition temperature and to decrease of the AFM-PM transition temperature. The Co substitution leads to disappearance of the FM state, only showing some FM impurity component, while Mn substituted compound indicates coexistence of FM and AFM states at low temperature. The phenomena imply complex itinerant electron properties in these magnetic systems.     

Reduction of Dislocations in GaN Epilayer Grown on Si （111） Substrates using a GaN Intermedial Layer

GaN intermedial layers grown under different pressures are inserted between GaN epilayers and AIN/Si（111） substrates. In situ optical reflectivity measurements show that a transition from the three-dimensional （3D） mode to the 2I） one occurs during the GaN epilayer growth when a higher growth pressure is used during the preceding GaN intermedial layer growth, and an improvement of the crystalline quality of GaN epilayer will be made. Combining the in situ reflectivity and transmission electron microscopy （TEM） measurements, it is suggested that the lateral growth at the transition of growth mode is favourable for bending of dislocation lines, thus reducing the density of threading dislocations in the epilayer.     

Chaos Synchronization Criterion and Its Optimizations for a Nonlinear Transducer System via Linear State Error Feedback Control

Global chaos synchronization of two identical nonlinear transducer systems is investigated via linear state error feedback control. The sufficient criterion for global chaos synchronization is derived firstly by the Gerschgorin disc theorem and the stability theory of linear time-varied systems. Then this sufficient criterion is further optimized in the sense of reducing the lower bounds of the coupling coefficients with two methods, one based on Gerschgorin disc theorem itself and the other based on Lyapunov direct method. Finally, two optimized criteria are compared theoretically.     

一种非刚性医学图像点匹配方法

提出了一种非刚性点匹配的算法并把其运用于医学图像配准．该算法采用信号滤波的方法来获得点集间的匹配信息，并运用松弛标记法将各点邻域关系对模糊的匹配信息进行迭代获得明确的匹配关系．在此基础上，利用高斯径向基函数来描述点模式间的弹性形变，在基本的迭代框架下实现问题的求解．实验结果显示在形变程度为5％、出格点比率50％和噪声标准差为5％的情况下该算法的匹配误差能控制在0．13以下，表明了该算法的鲁棒性和有效性，较好地解决了医学非刚性形变的点匹配问题．     

Ethylene–propylene copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Ethylene–propylene copolymerization, using [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ (R₁ = CF₃, Ph, or t‐Bu; R₂ = CH₃ or CF₃) titanium complexes activated with modified methylaluminoxane as a cocatalyst, was investigated. High‐molecular‐weight ethylene–propylene copolymers with relatively narrow molecular weight distributions and a broad range of chemical compositions were obtained. Substituents R₁ and R₂ influenced the copolymerization behavior, including the copolymerization activity, methylene sequence distribution, molecular weight, and polydispersity. With small steric hindrance at R₁ and R₂, one complex (R₁ = CF₃; R₂ = CH₃) displayed high catalytic activity and produced copolymers with high propylene incorporation but low molecular weight. The microstructures of the copolymers were analyzed with ¹³C NMR to determine the methylene sequence distribution and number‐average sequence lengths of uninterrupted methylene carbons. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5846–5854, 2006     

Chemically modified proton‐conducting membranes based on sulfonated polyimides: Improved water stability and fuel‐cell performance

A series of branched/crosslinked sulfonated polyimide (B/C‐SPI) membranes were prepared and evaluated as proton‐conducting ionomers based on the new concept of in situ crosslinking from sulfonated polyimide (SPI) oligomers and triamine monomers. Chemical branching and crosslinking in SPI oligomers with 1,3,5‐tris(4‐aminophenoxy)benzene as a crosslinker gave the polymer membranes very good water stability and mechanical properties under an accelerated aging treatment in water at 130 °C, despite their high ion‐exchange capacity (2.2–2.6 mequiv g^?1). The resulting polymer electrolytes displayed high proton conductivities of 0.2–0.3 S cm^?1 at 120 °C in water and reasonably high conductivities of 0.02–0.03 S cm^?1 at 50% relative humidity. In a single H₂/O₂ fuel‐cell system at 90 °C, they exhibited high fuel‐cell performances comparable to those of Nafion 112. The B/C‐SPI membranes also displayed good performances in a direct methanol fuel cell with methanol concentrations as high as 50 wt % that were superior to those of Nafion 112. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3751–3762, 2006     

Automated method, based on micro-sequential injection, for the study of enzyme kinetics and inhibition.

A micro-reactor system with continual spectrophotometric detection has been operated in Sequential Injection lab-on-valve (SI-LOV) mode and applied to enzyme kinetics and inhibition studies, using acetylcholinesterase (AChE) and angiotensin-converting enzyme (ACE) as model systems. With the advantages of automation, real-time kinetic measurement, and thorough mixing, the SI-LOV micro-reactor system allows for the monitoring of initial reaction rates and determination of reactant concentrations in the reaction mixture, both of which are essential for the determination of kinetic constants for enzymes and inhibitors. Enzyme, substrate, and inhibitor are precisely metered by the syringe pump and delivered to a stirred micro-reactor, followed by a reference scan that establishes the baseline for the following reaction rate measurement. Michaelis constants (Km) for AChE and ACE were determined to be 0.16 mM and 0.30 mM, respectively, which are consistent with literature values. The type of inhibition (competitive, uncompetitive, or mixed), the dissociation constants for the inhibitors, and the inhibitor dose-response curves were also determined.     

Chiral separation of synthetic vicinal diol compounds by capillary zone electrophoresis with borate buffer and beta-cyclodextrin as buffer additive.

The investigation on capillary electrophoretic enantioseparation of six synthetic compounds containing vicinal diol groups has been undertaken to acquire the optimum conditions using native beta-cyclodextrin (beta-CD) as chiral selector and borate as a background electrolyte. The separation was carried out in an uncoated capillary (58.5 cm x 75 microm i.d., effective length 48.5 cm) and the effects of several important factors were investigated in detail. The results showed that beta-CD as a chiral selector exhibited good enantioselectivity and that the enantioseparation was greatly influenced by the structure of the diols, the borate concentration and the buffer pH. The optimum performance was obtained for the chiral vicinal diols under the conditions of 200 mM borate buffer of pH 9.8 containing 1.7% beta-CD at an applied voltage of 15 kV and a capillary temperature of 20 degrees C. Under the conditions, four diols were baseline separated with fast analysis time and the good theoretical plate numbers (above 10 x 10(4)) and favorable migration-time reproducibilities (RSDs below 3.0%) were obtained. The separation results were satisfactory.     

A highly sensitive and rapid assay for protein determination in human urine and penicillin using a Rayleigh light-scattering technique with benzeneazo-8-acetylamino-1-naphthol-3,6-disulfonic acid sodium salt.

A simple and sensitive method was conducted for the determination of trace amounts of proteins with benzeneazo-8-acetylamino-1-naphthol-3,6-disulfonic acid sodium salt (azophloxine, AP) using a Rayleigh light-scattering (RLS) technique. At pH 2.60 and in the presence of an emulsifier OP microemulsion, the RLS of AP can be greatly enhanced by proteins, owing to the interaction between AP and protein. The enhanced intensity is proportional to the concentration of proteins. Four proteins, including bovine serum albumin (BSA), human serum albumin (HSA), lysozyme (Lys) and gamma globulin (gamma-G) have been tested. For example, the linear range of BSA was 0 - 0.06 microg mL(-1) with detection limits of 2.38 ng mL(-1). The method was applied to the analysis of protein in human urine and penicillin samples with satisfactory results. The relative standard deviation was in all instances less than 4.0%, and the recovery was in the range of 97.5 - 104%.