A prototype MRPC beam test for the BESⅢ ETOF upgrade

A prototype multi-gap resistive plate chamber (MRPC) with a 2×6 gap structure is developed for the upgrading of the endcap time-of-flight (ETOF) detector in the Beijing Spectrometer (BESⅢ). The prototype MRPC is tested in the E3 beam line of the Beijing Electron Positron Collider (BEPC) with secondary charged particles (π and p, etc) of 600 MeV/c. The test results show that the time resolution of the MRPC can reach 50 ps and that the detection efficiency is greater than 98%.     

Low temperature testing and neutron irradiation of a swept charge device on board the HXMT satellite

We present the low temperature testing of an SCD detector, investigating its performance such as readout noise, energy resolution at 5.9 keV and dark current. The SCD's performance is closely related to temperature, and the temperature range of -80 ℃ to -50 ℃ is the best choice, where the FWHM at 5.9 keV is about 130 eV. The influence of the neutron irradiation from an electrostatic accelerator with fluence up to 1×10⁹ cm^-2 has been examined. We find the SCD is not vulnerable to neutron irradiation. The detailed operations of the SCD and the test results of low temperature are reported, and the results of neutron irradiation are discussed.     

MICROMEGAS一维位置编码读出初步测试

介绍了微型网状结构的气体探测器一维位置编码读出的基本原理和实现方法。设计了一块灵敏面积为10 cm×10 cm的一维位置编码PCB读出电极。测试表明: 感应读出是可行的, 电荷按1∶2分配最为理想; 利用55Fe放射源X射线通过200 μm狭缝对准读出电极PCB板的正面中任意一条, 位置编码读出能很好地再现源所在狭缝的位置。针对其局限性, 提出了一维位置分组编码读出技术, 以解决相邻多条同时点火的情况。使用该读出技术, 使一维读出电子学路数节省量达到75%以上。The basic principles and implementation of one dimensional position encoding read out for MICROMEGAS have been introduced in this paper. A 10 cm×10 cm prototype of one dimensional position encoding read out electrode based on printed circuit board was designed. Preliminary test indicates that the induction read out is feasible and the ideal charge distribution is 1∶2. X rays emitted from 55Fe source were collimated to one of strips on the read out electrode through a slit of 200 μm, position decoding well reproduced the position of the 55Fe source. For its limitations, we have proposed a one dimensional grouped position encoding read out technique to address a neighboring strips simultaneously fired situation. The amount of read out electronics is very easy to approach a obduction of 75% with position encoding read out technology.     

Signals of the littlest Higgs model with T-parity at eγ and ep collisions

The littlest Higgs model with T-parity predicts the existence of the neutral, weakly interacting, new gauge boson B_H, which can be seen as an attractive dark matter candidate. We study production of the new gauge boson B_H via eγ and ep collisions. We find that B_H can be abundantly produced via the subprocesses e^－γ→L^－B_H and γq→B_HQ, which might give rise to characteristic signals. Some discussions about the SM backgrounds for this kind of signals are also given.     

翼型前缘分离流动在等离子体激励器控制下的响应

将等离子体对中性气体的作用模型化为彻体力矢量,采用DES(Detached Eddy Simulation)和DDES(Delayed-Detached Eddy Simulation)方法,求解带彻体力源项的Navier-Stokes方程,研究NACA0015翼型16°迎角下,前缘分离流动在等离子体激励器控制下的响应过程.激励器工作后,DDES计算结果显示,分离流动经历一个渐近的再附过程;DES计算因发生网格诱导分离,得到了非定常的响应过程.     

一维对称光量子阱结构多通道滤波特性研究

利用传输矩阵法研究了一维对称光量子阱结构的多通道滤波特性,发现该结构的多透射峰具有分布对称、近似等间距和高透射率等特点,且峰值位置能利用等效理论近似解析求出.透射峰的数目可通过阱区结构参量确定和进行调整,结构的光子禁带范围可通过材料参量的选择获得极大的展宽.该结构只采用两种材料,结构简单,易于制作,具有较大的材料选择性.     

正方形自聚焦透镜光线理论研究

针对正方形自聚焦透镜折射率分布特点,引入方向角概念,以平方律表征其折射率分布.从理论上研究了平方律折射率分布下正方形自聚焦透镜的光线轨迹方程,得到了子午光线表达式.结果表明,与传统径向自聚焦透镜相比,正方形自聚焦透镜的光线轨迹受光线入射方向角影响,会产生较大像差.得到了正方形自聚焦透镜数值孔径表达式,表明数值孔径并非常量,且与方向角密切相关.计算了中心轴上的最大数值孔径,方向角为0°时最小为0.405,方向角为45°时最大值0.5以上.     

用于航天的高分辨率大视场光学系统设计

设计了一种用于图像拍摄的高分辨率大视场光学系统,其结构形式为复杂化的反摄远基本型.主要光学参量为:f′=6.59 mm,2ω=62°,F数为2.2;在85 lp/mm处,MTF达到0.8,在230 lp/mm处MTF为0.46,基本达到衍射极限,光谱范围为0.486~0.656 μm.设计评价结果表明,该系统的光学性能能够满足成像质量要求,达到了大视场、高分辨率的目的.     

大豆叶面积指数的高光谱估算方法比较

叶面积指数(leaf area index,LAI)是重要的生物物理参数,亦是各种生态模型、生产力模型以及碳循环研究等的重要生物物理参量,因此具有重要的研究意义。通过分析大量实测数据,选用归一化植被指数(normalized difference vegetation index,NDVI)和比值植被指数(ratio vegetation index,RVI)、主成分分析(principcal component analysis, PCA)、神经网络(neural network NN)三种方法对大豆使LAI进行了估算,比较分析了三种方法的估算结果。研究结果表明,植被指数法(NDVI,RVI),主成分分析,神经网络方法LAI都取得了较为理想的结果,验证模型的确定性系数分别达0.758和0.753, 0.954, 0.899,其中主成分分析方法和神经网络方法精度较高,主成分分析方法验证模型的稳定性更好,其验证模型的RMSE为0.267,明显低于两个植被指数(NDVI和RVI的RMSE分别为0.594和0.616)和神经网络(RMSE=0.413)。当叶面积指数较小时,植被指数能够较好地去除土壤、大气等条件影响,并精确估算LAI;当叶面积指数较大时,主成分分析能够弥补植被指数饱和的缺陷,得到很好的LAI估算效果。神经网络受LAI大小的影响效果居中,其对叶面积指数较小和较大时具有一致的估算效果,具有较好的应用潜力。     

全合成法光纤预制棒制造研究

介绍了一种全新的全合成法G.655和G.656光纤制造工艺,详细分析了该工艺中芯层折射率差Δ0、芯层厚度a、第二包层的折射率差Δ2、第二包层的厚度c2等结构参量与光纤光学性能的关系.结果表明,制造该两种光纤时,Δ0应在0.012 0～0.015 5之间,Δ2应在0.014 0～0.023 0之间,a应在2.8～3.2 μm之间,c2应在满足截止波长的要求下尽可能小.