HIT太阳电池衬底形貌修饰及其应用研究

在HIT太阳电池非晶硅沉积过程中,单晶硅衬底的绒面金字塔沟壑处易发生外延生长,影响电池输出性能.采用碱性体系(NaClO溶液)对硅片进行绒面形貌修饰,在NaOH的各向异性刻蚀和NaClO的氧化作用下,金字塔结构由尖锐的四面体向较圆滑的“锥形”转变,尤其金字塔底部变得平滑.随着形貌修饰时间的增加,样品表面平均反射率呈线性增大,从未修饰样品的12.48;升高至13.79;,钝化后硅片少子寿命显著提升,绒面形貌修饰有效改善了界面钝化质量,中长波外量子效率提升,从而实现电池电性能的提升.样品绒面形貌修饰45 min后,开路电压从656.3 mV升高至699.8 mV,转换效率提高1.8;.此外,研究了反应温度对表面形貌修饰及HIT太阳电池性能的影响,基于70℃、10; NaClO溶液、45 min的绒面修饰条件下制备的HIT太阳电池转换效率达到最高,为12.02;.     

Cloning, Expression and Purification of Wheat Acetyl-CoA Carboxylases CT Domain in E.coil

The entire gene of carboxyltransferase(CT) domain of acetyl-CoA carboxylase(ACCase) from Chinese Spring wheat(CSW) plastid was cloned firstly,and the 2.3 kb gene was inserted into PET28a+ vector and expressed in E.coil in a soluble state.The (His)6 fusion protein was identified by SDS-PAGE and Western blot.The recombinant protein was purified by affinity chromatography,and the calculated molecular mass(Mr) was 88000.The results of the sequence analysis indicate that the cloned gene(GeneBank accession No.EU124675) was a supplement and revision of the reported ACCase CT partial cDNA from Chinese Spring wheat plastid.The recombinant protein will be significant for us to investigate the recognizing mechanism between ACCase and herbicides,and further to screen new herbicides.     

Decomposition Reaction of Zn-MPA（3-Mercaptopropionic Acid） Complex Under Microwave Irradiation

The thermal decomposition of Zn-MPA complex was investigated under microwave irradiation. ZnO and ZnS nanocrystals could be obtained by decomposing Zn-MPA（3-mercaptopropionic acid） complex under different reaction conditions. It was found that both the pH value of the solution and the molar ratio of Zn2＋ and MPA can play an important role in the formation of ZnO and ZnS nanocrystals. MPA mainly acts as an S source or as a complexing agent. This study provides a new route for the controllable preparation of semiconductor nanocrystals.     

一类利用回归关系的计量指标抽样方案

在产品质量判定的抽样检验问题中,当目标指标需用破坏性试验才能得其值时,更为常用的是用非破坏性试验可得量值的协变指标量来预报它。但在产品抽样验收问题上,未能形成理论较为严密的方法,这是由于预报误差这个关键问题的处理尚未解决得好,即给不出抽样方案的功效计算的正确或是近似性较好的公式。本文通过建立合理的数学模型,把对目标指标的质量要求化为对协变指标量的统计要求,从而利用两者的回归关系,结合两种复杂的抽样方案,给出功效函数的计算公式和计算方法,并进行了分析。     

A DIFFUSIVE SVEIR EPIDEMIC MODEL WITH TIME DELAY AND GENERAL INCIDENCE

In this paper,we consider a delayed diffusive SVEIR model with general inci-dence.We first establish the threshold dynamics of this model.Using a Nonstandard Fi...     

聚合物气体辅助注射成型制品的形态结构

作为一种由常规注射成型发展起来的聚合物加工技术,气体辅助注射成型具有节约原材料、缩短成型周期以及提高制品性能等优点,已得到广泛的应用.由于气辅成型过程是一个在刚、柔双重约束界面条件下进行的多相复杂体系的多次流动过程,因而其形态结构的形成、发展和演化要远比常规注塑成型复杂.然而在气辅成型的形态结构方面,国内外的研究一直以来开展得较少.近年来,作者在聚合物及其共混物、复合材料气辅成型制品的形态结构方面已开展了广泛的研究工作,本文对这些工作和一些重要结果作了总结,并简要分析了成型过程中剪切场对形态演化的影响,最后对该研究方向的发展趋势作了展望.     

UPLC-ELSD法测定黄芪中的黄芪甲苷含量

采用Waters Acquity UPLC BEH C18色谱柱（2.1mm×100mm,1.7μm）,流动相为乙腈-水（30∶70）,流速为0.2mL·min^-1,柱温30℃,用UPLC-ELSD法测定黄芪中黄芪甲苷的含量。黄芪甲苷在0.10-0.50mg·mL^-1范围内有良好的线性关系（r=0.9990）,平均回收率（n=6）为98.9%。该方法快速、准确、重复性好,为黄芪的质量控制提供了一种快速准确的检测方法。     

钴(Ⅱ)、镍(Ⅱ)-二甲酚橙多元络合物的光谱特性研究

研究了Co(Ⅱ)、Ni(Ⅱ)-NH3-XO混配络合物和Co(Ⅱ)、Ni(Ⅱ)-NH3-XO-CTMAB多元络合物的形成条件及吸收光谱特性,结果表明,在pH 9.5的氨性缓冲溶液中,[NH3]/[XO]值在100~400范围内所形成的钴、镍多元络合物的最大吸收波长分别为530和590 nm,钴的多元络合物在0~2.0 mg.L-1、镍的多元络合物在0~2.6 mg.L-1范围内符合比耳定律,相对标准偏差分别为2.1%和1.9%。     

SYNTHESIS AND CHARACTERIZATION OF N-（1-NAPHTHYL） SUCCINIMIDE

In this paper a modified two-step procedure for synthesis of N-（1-naphthyl） suecinimide （NaS） was developed, and the molecular structure of NaS was properly characterized by XRD, FT-IR, 1H NMR, DSC, etc. The results show that the melting point of our product is 159 ℃-160.5 ℃, and the characteristic infrared absorption band of carbonyl group splits into two peaks （1705cm^-3/1779cm^-3）, which are found to be quite different from the documented data （rap 147℃ -149℃; IR C=0-1700cm^-3）. Besides, photophysical spectroscopy was found to be powerful to study the molecular structure and crystal morphology of NaS compound.