Preparation and Evaluation of Molecularly Imprinted Monolithic Column for Felodipine in Micro-liquid Chromatography

This study concentrated on the production of molecularly imprinted polymers (MIPs) as highly selective sorbents for felodipine (FLD), a representive dihydropyridine calcium antagonists. Demonstrated chromatographically through a selection factor, these MIPs showed high selectivity for the template molecule among a group of structurally similar compounds. The recognition was found to correlate with structural similarity to the template compound.     

三接触弯曲构型的蓝移氢键CH3…Y的理论研究

运用量子化学从头算方法, 在MP2/6-311＋＋G(d,p), MP2/6-311＋＋G(2df,2p), MP2/6-311＋＋G(3df,3pd)和QCISD/6-311＋＋G(d,p)水平上, 研究了CH₃F, CH₃Cl和CH₃Br作为质子给体与Cl^－, Br^－作为质子接受体形成的氢键CH₃…Y. 计算结果表明: 6种复合物中C—H键收缩, 伸缩振动频率增大, 形成蓝移氢键. 分子中原子(Atoms in Molecules, AIM)分析表明, 这些复合物的电子密度拓扑性质与普通氢键有着本质的不同, 在Y…H之间不存在键临界点, 而在Y与C之间存在键临界点, 因此这些相互作用严格地不能称为氢键. 自然键轨道(Natural bond orbital, NBO)分析表明, 在这些复合物中弯曲的CH…Y的特殊结构使得分子间超共轭n(Y)®σ*(C—H)减小到可以忽略; 质子接受体的电子密度没有转移到σ*(C—H)上, 而是转移到了σ*(C—X) (X＝F, Cl, Br)上; 存在一定程度的重杂化; 分子内超共轭相互作用减小使得σ*(C—H)的电子密度减少. 这些因素共同导致C—H伸缩振动频率的蓝移.     

Coating Carbon Nanotubes with Europium Oxide

Carbon nanotubes (CNTS) coating with europium oxide by a simple method is reported in this letter for the first time. The CNTS were refluxed in a solution of nitric acid containing europium nitrate, and the pH value was subsequently ajusted with ammonia solution. At last, the mixture was filtered and annealed. The TEM micrograph showed that the CNTS were covered with a uniform thin layer with thickness of about 15 nm. The XRD results revealed that the CNTS were coated with europium oxide.     

1,4-二乙氧基苯的相转移催化合成

采用大孔型交联聚苯乙烯为载体研究制得新型季Lin盐型相转移催化剂Y98B，并将其于1，4－二乙氧基苯的催化合成反应，进行了产品的红外光谱分析和熔点测定，探讨了催化剂用量、对苯二酚与溴乙烷物的质量比、反应温度和反应时间等动力学条件对产品收率的影响。确定了在反应温度为70℃,mol对苯二酚：mol溴乙烷＝1：3．5，反应时间4h，催化剂用量3．0g的条件下产品收率可达84.3%。     

Determination of Utratrace Silver Using Surfactant As Sensitizer by Catalytic Near Field Laser Thermal Lens Spectrometry

Thermal lens spectrometry (TLS) is an excellent tool for trace analysis1. TLS allows the detection of absorbances of 10-7～10-8, concentration of ≈ 10-11 mol稬-1 and the analysis of 10-15 L volumes with ≈10-2 absorbing molecules2. Kinetic analysis is playing an increasingly important part in modern analytical chemistry. Therefore, TLS shows much promise in combination with kinetic analysis. However, there are few data on TLS applications in kinetic analysis method so far3～4. A ne…     

对固体圆二色光谱测试方法的再认识——兼谈“浓度效应”

对近期发展的固体圆二色(CD)光谱测试方法进行了概述、评价和比较, 着重探讨了“浓度效应”的存在使固体CD光谱失真的原因. 通过对本课题组和其他作者已报道的四种化合物的固体CD谱再测试的反思, 强调了依手性化合物的手性光谱学性质不同, 根据浓度梯度实验选择其合适测试浓度的必要性. 对固有手性的阻转异构化合物(S)-1,1'-联二萘酚(S-BINOL)进行了成膜法固体CD谱浓度梯度测试, 发现所得固体薄膜CD谱中也存在着“浓度效应”     

对固体圆二色光谱测试方法的再认识——兼谈“浓度效应”

对近期发展的固体圆二色(CD)光谱测试方法进行了概述、评价和比较, 着重探讨了“浓度效应”的存在使固体CD光谱失真的原因. 通过对本课题组和其他作者已报道的四种化合物的固体CD谱再测试的反思, 强调了依手性化合物的手性光谱学性质不同, 根据浓度梯度实验选择其合适测试浓度的必要性. 对固有手性的阻转异构化合物(S)-1,1'-联二萘酚(S-BINOL)进行了成膜法固体CD谱浓度梯度测试, 发现所得固体薄膜CD谱中也存在着“浓度效应”     

对固体圆二色光谱测试方法的再认识——兼谈“浓度效应”

对近期发展的固体圆二色(CD)光谱测试方法进行了概述、评价和比较, 着重探讨了“浓度效应”的存在使固体CD光谱失真的原因. 通过对本课题组和其他作者已报道的四种化合物的固体CD谱再测试的反思, 强调了依手性化合物的手性光谱学性质不同, 根据浓度梯度实验选择其合适测试浓度的必要性. 对固有手性的阻转异构化合物(S)-1,1'-联二萘酚(S-BINOL)进行了成膜法固体CD谱浓度梯度测试, 发现所得固体薄膜CD谱中也存在着“浓度效应”     

STUDY ON THE DUCTILE DEFORMATION DOMAIN OF THE SIMPLE SHEAR IN ROCKS——TAKING BRITTLE FAULTS OF THE COVERING STRATA IN THE SOUTHERN JIANGSU AREA AS AN EXAMPLE

A study on the ductile deformation domain of the brittle fault in the shallow level ofthe crust is a new probe field for the modern structural geology. Taking the southern Jiang-su Province area as an example the orientation measurement of quartz crystals, the com-positional texture observation of three pressure sensitive minerals and the rheological param-eter determination of dislocation densities, etc. have been demonstrated and analysed basedon typical samples in the present paper. In addition, their generation mechanisms arealso discussed from the cataclastic rheology, the dynamic differentiation and the simpleshearing, specially, from the Ode strength theory. Finally, a generative relationship betweenthe ductile deformation domain of the brittle fault system, in the regional layer--slip andthe formation of the stratabound ore deposit is shown as well.     

γ—Mo2N合成过程中的热变化及中间产物的研究

采用ＤＴＡ技术，通过改变升温速率研究了γ－Ｍｏ２Ｎ合成过程中的热变化，并经ＸＲＤ，ＢＥＴ及ＩＲ测试，对ＤＴＡ曲线中的谱峰进行归属，考察了中间产物，ＤＴＡ结果表明，在ＭｏＯ３和ＮＨ３程序升温反应过程中有放热峰及吸热峰出现，且随升温速率的长高，放热峰面积与吸热峰面积之比逐渐减小，结合ＸＲＤ及ＩＲ结果可知，ＤＴＡ曲线听放热峰可归属为由ＭｏＯ３变化为ＭｏＯ２的还原峰，吸热峰则归属为由ＭｏＯ２变化为Ｍｏ２Ｎ