Evolution of magnetism in U(Ni 1- xPd x) Si single crystals

Single crystals of U(Ni_1-xPd_x)₂Si₂ with x = 0.05, 0.09 and 0.135 have been grown. Magnetization and electrical resistivity measurements were performed in a wide range of temperatures and magnetic fields in order to study stability of magnetic phases in the solid solutions between UNi₂Si₂ and UPd₂Si₂ with a special emphasis on the type of ground state. In UPd₂Si₂ the simple AFI-type antiferromagnetic structure of U moments is observed at low temperatures. UNi₂Si₂ adopts the uncompensated AF structure (UAF) with the + + - stacking of U moments along the c-axis and consequently this compound exhibits a spontaneous magnetization corresponding to 1/3 of the U moment. The substitution of Pd for Ni leads to a rapid decay of the spontaneous magnetization. The evolution of magnetization and electrical resistivity behavior with Pd doping is tentatively attributed to the coexistence of the AF-I and UAF phases in the ground state of U(Ni_0.91Pd_0.09)₂Si₂ and U(Ni_0.865Pd_0.135)₂Si₂. In this scenario, the volume fraction of the AF-I phase rapidly grows with Pd doping on account of the UAF. At lowest temperatures an irreversible transition to the UAF phase is observed when a sufficiently high magnetic field is applied along the c-axis. Received 28 March 2002 / Received in final form 8 August 2002 Published online 19 December 2002 RID="a" ID="a"e-mail: sech@mag.mff.cuni.cz     

High-power,high-quality ZGP OPO pumped by a Tm,Ho:GdVO<Subscript>4</Subscript> laser

We report a ZGP OPO system capable of producing >6 W at a signal wavelength of 3.80 μm and an idler wavelength of 4.45 μm. The pumping source is the Tm,Ho:GdVO₄ laser operated at 2.049 μm with an M ² of 1.07. The ZGP OPO generated a total combined output power of 6.1 W at signal wavelength and idler wavelength under pumping power of 18.3 W, and an M ² of 1.7 for OPO output was obtained.     

Segmented circular LD arrays side-pumped a Nd:YAG laser rod

We design a Nd:YAG module with symmetrical LD side-pumped structure in a periodical arrangement between circular LD arrays and holders. This novel design has great potential to be used in compact and miniature laser systems. Design optimization and simulation on thermal effects have been performed. An experiment has also been carried out. The experiment results indicate the all-solid-state laser with the-Nd:YAG module can stably operate in the range of 10–30 Hz with no controlling temperature by TE cooler. The laser beam had a divergence angle less than 3.8 mrad and a maximum output pulse of 174 mJ has been obtained at the pump current of 50 A and working frequency of 23 Hz, corresponding to optical-optical conversion efficiency of 40.2%.     

Estimating whale density from their whistling activity: Example with St. Lawrence beluga

A passive acoustic method is developed to estimate whale density from their calling activity in a monitored area. The algorithm is applied to a loquacious species, the white whale (Delphinapterus leucas), in Saguenay fjord mouth near Tadoussac, Canada, which is severely affected by shipping noise. Beluga calls were recorded from cabled coastal hydrophones deployed in the basin while the animal density was estimated visually from systematic observations from a fixed-point on the shore. Beluga calling activity was estimated from an algorithm extracting the call events in time-frequency space, while simultaneously tracking the masking intensity resulting from local shipping noise. The activity index was summarized in 15- and 30-min bins using four different metrics. For bins containing more than 40% of valid data, the metrics were compared to the corresponding visual observations. The estimated mean acoustic detection range generally exceeded the fjord width, and extended to the whole ∼3-km long monitored area under low-noise conditions. The significant linear relations of the visual estimates with the calling activity metrics allowed assessing expected number of visually detected belugas in the basin from a weighted regression model, with a mean standard error of 7.1%.     

Precise nuclear moments of extremely proton-rich nuclus 23 Al

Electric quadrupole coupling constant eqQ/h of the extremely proton-rich ²³Al (I ^π ?=?5/2^?+?, T _1/2?=?0.47 s) nucleus implanted into an Al₂O₃ single crystal has been measured for the first time, using the β-ray detecting nuclear quadrupole resonance method (β-NQR) in a high magnetic field. As a preliminary result, the quadrupole coupling constant was determined as |eqQ/h(²³Al) |?=?2.66±0.77 MHz. Using the quadrupole coupling constant of ²⁷Al in Al₂O₃ as a reference, the Q moment of the ground state of ²³Al was extracted as |Q(²³Al)|?~?160 mb, which is well explained by the shell model calculation in the sd-shell model space with the USD interaction.     

Growth and characterization of type-II ZnO/ZnTe core-shell nanowire arrays for solar cell applications

Large area, well-aligned type-II ZnO/ZnTe core-shell nanowire arrays have been fabricated on an a-plane sapphire substrate. The ZnO nanowires were grown in a furnace by chemical vapor deposition with gold as catalyst and then were coated with a ZnTe shell on the ZnO nanowires surface by a metal-organic chemical deposition chamber. The morphology and size distribution of the ZnO/ZnTe core-shell nanowire arrays were studied by scanning electron microscopy (SEM) and the crystal structure was examined by x-ray diffraction (XRD). Transmission measurement was used to study the optical properties of the core-shell nanowires. The results indicated that the ZnO/ZnTe core-shell nanowire arrays have good crystalline quality. In addition, it was found that the nanowire arrays have good light absorption characteristics and these properties make it suitable for making photovoltaic devices.     

GaN-nanowire-based dye-sensitized solar cells

GaN nanowires typically exhibit high electron mobility and excellent chemical stability. However, stability of GaN is detrimental for successful attachment of dye molecules and its application in dye-sensitized solar cells (DSSCs). Here we demonstrate DSSCs based on GaN/gallium oxide and GaN/TiO _x core–shell structures, and we show that coating of GaN nanowires with a TiO _x shell significantly increases dye adsorption and consequently photovoltaic performance. The best cells exhibited short circuit current density of 1.83 mA/cm² and power conversion efficiency of 0.44% under AM 1.5 simulated solar illumination.     

Perfect impedance-matched left-handed behavior in combined metamaterial

Matching the impedance of a medium to free space, which is usually not available in natural materials, is an important advance in metamaterials. In this paper, we present a simple mechanism for a perfect impedance-matched left-handed metamaterials, that reveals a nearly zero reflection over operating frequency. This finding is based on the independent manipulation of the electric response without any effect on the magnetic one.     

White and some colored marbles as alternative radiation shielding materials for applications

ABSTRACT

In this paper, the radiation shielding parameters such as linear attenuation coefficients (LAC, µ), mass attenuation coefficients (MAC, µ/ρ), effective atomic numbers (Z_eff), effective electron densities (N_eff), half value of layers (HVL), mean free paths (MFP) and buildup factors (exposure (EBF) and energy absorption (EABF)) were investigated for cream (M1), pink (M2), white (M3), maroon (M4) and green (M5) marbles. Attenuation coefficients were measured in the energy region 31.18–661.66 keV photon energies. The values of Z_eff and N_eff were then calculated using these coefficients with logarithmic interpolation method, and HVLs and MFPs were calculated using the values of LAC of marble samples at the same photon energies. The experimental results were compared with the theoretical values obtained from WinXCom program, and good agreements were observed between the experimental and theoretical results. HVLs and MFPs of all marble samples were compared with those of some concretes, glasses and commercial radiation shielding glasses (SCHOTT Co.). The studied marbles were better radiation shielding materials than standard shielding concretes due to lower HVL and MFP values lower than the ordinary concrete. Finally, EBFs and EABFs of the marbles were calculated in the energy region 0.015–1?MeV up to penetration depths of 40 mfps by Geometric Progression method (G-P), and the results were discussed in terms of photon energies and chemical compositions of the marbles.