Highly efficient rhodium/monodentate phosphoramidite catalyst and its application in the enantioselective hydrogenation of enamides and alpha-dehydroamino acid derivatives

An easily prepared and highly efficient monodentate phosphoramidite ligand derived from BINOL, (S)-2,2'-O,O-(1,1'-binaphthyl)-dioxo-N,N-diethylphospholidine, was examined in the hydrogenation of both enamides and alpha-dehydroamino acid derivatives. The catalyst provided remarkably high enantioselectivities (up to 99.6% ee for enamides and >99.9% ee for alpha-dehydroamino acid derivatives).     

Optimization of simulated moving bed plants with low efficient stationary phases: separation of fructose and glucose

An optimization procedure for simulated moving bed (SMB) plants with low efficient stationary phases is presented. The new aspect is that the desorbent consumption can be cut by 70% by running the plant with lower internal liquid flows and a corresponding larger switch time while the productivity is kept constant. This concept was validated by the separation of fructose and glucose in water on a calcium resin with an eight-column SMB plant. The separation can be predicted well by a true moving bed (TMB) and a simulated moving bed simulation. Adsorption isotherms were determined up to 300 kg/m3 for glucose and 500 kg/m3 for fructose from 25 to 80 degrees C. Experimental SMB runs were performed over a wide range of feed concentrations (10-350 kg/m3) and temperatures (25-80 degrees C). The strong influence of the delay volume is pointed out. For an experimental run with high feed concentration a complete set of data is presented. To reduce biological growth separation at 80 degrees C is recommended.     

Practical asymmetric synthesis of (S)-MA20565, a wide-spectrum agricultural fungicide

A practical asymmetric synthesis of a wide-spectrum agricultural fungicide, (S)-MA20565 (1), is described. The convergent synthesis was achieved starting from commercially available 3-(trifluoromethyl)aniline (7) in 44% overall yield through five steps and 2-bromobenzaldehyde (9) in 48% overall yield through four steps, respectively. (S)-O-[1-(3-Trifluoromethylphenyl)ethyl]hydroxylamine (2), a key intermediate of 1, was prepared via ruthenium(II)-catalyzed asymmetric transfer hydrogenation of 1-(3-trifluoromethylphenyl)ethanone (6) followed by chlorination using methanesulfonyl chloride and oxyamination using potassium acetohydroxamate with high level of stereocontrol.     

An application of activation analysis of aluminum in biological materials

The behavior of aluminum compounds in animals was made clear by using non-destructive neutron activation analysis instead of radiotracer method. Basic aluminum sucrose sulfate (BASS) and dried aluminum hydroxide gel (DAHG) were orally administered to rats. The residual BASS and DAHG on gastric walls of rats were determined by neutron activation analysis. It was obtained the following results that BASS was found at the longer time in the stomach. For reason, it is seemed that BASS is hydrolyzed in gastric juice. And it could not find the aluminum in liver, kidney and spleen.     

Chemical studies on nitrogen heterocyclic skeleton of the Daphniphyllum alkaloids

From a biogenetic point of view, a great variety of related alkaloids isolated from the plant Daphniphyllaceae are related to one another by bond formation or fission. Thus, daphnialcohol acetate (6), a derivative of the degradation products of daphniphylline (1), was subjected to von Braun degradation followed by acid-catalyzed recyclization to give an isomer (8) of daphnialcohol, which has a new type of nitrogen heterocyclic skeleton. Furthermore, daphnilactone-B (3) was converted into a daphniphylline-type compound (19) via a plausible intermediate (21).     

Evaluation of thallium-201 myocardial emission computed tomography based on a comparison with postmortem findings

The correlative study of myocardial perfusion assessed by 201Tl myocardial ECT with the pathological finding of the heart was performed in 10 autopsied cases with mean age of 77 years old (range: 60-90 y). In 6 cases with myocardial infarction (MI) 7 perfusion defects were observed, that was, 3 in anteroseptal wall, 1 in anterolateral wall and 3 in posterior wall on the images of SPECT. Seven MIs were also found in postmortem examination. Six MIs were observed at autopsy corresponding to perfusion defect on SPECT images. In one myocardial perfusion defect at inferoposterior portion on SPECT, a non-transmural MI was found at anteroseptum. In one case with valvular disease a false positive result was obtained at posterior wall where neither myocardial necrosis nor fibrosis was observed at autopsy. This case had aortic stenosis due to bicuspid aortic valve by autopsy. The ventricle was divided into 16 segments in each of 4 short axial images to evaluate extent of MI. SPECT for extent of MI showed sensitivity of 81.9%, specificity of 96.0% and diagnostic accuracy of 92.5%. False negative segment was apt to be observed at the surrounding of non-transmural MI or basal half of left ventricle (LV) with transmural MI, while false positive segment was at posterior portion of basal half of LV. It was concluded that myocardial ECT was useful for evaluation of the site and extent of MI.     

Flow injection chemiluminescence determination of polyhydroxy phenols using luminol-ferricyanide/ferrocyanide system

It was found that the weak chemiluminescence produced from the reaction of polyhydroxy phenols with luminol in alkaline solution could be strongly enhanced by ferricyanide and ferrocyanide. Based on this found, a new flow injection chemiluminescence method is proposed for the determination of four polyhydroxy phenols: pyrogallol, phlorglucinol, quinol and resorcinol. The detection limits of the method are 0.03 μg ml⁻¹ pyrogallol, 0.03 μg ml⁻¹ phlorglucinol, 0.04 μg ml⁻¹ quinol, and 0.02 μg ml⁻¹ resorcinol. The possible mechanism of CL reactions is also discussed briefly.     

Molecular orbital calculation of Mössbauer parameters for Sn(CH3)nH4−n (n=0, 1, 2, 3) and their photoproducts in low temperature matrices

Mössbauer parameters of tin compounds, Sn(CH₃)₂H_4–n (n=0, 1, 2, 3, 4), isolated in low temperature matrices were related to electronic properties at the tin nuclei obtained by molecular orbital calculations. Structures of novel species, Sn(CH₃)₂ and Sn(CH₃)H, produced via photodissociation of matrix-isolated Sn(CH₃)₃H and Sn(CH₃)₂H₂, respectively, were determined on the basis of molecular orbital calculations as compared with Mössbauer parameters. The correlations between Mössbauer quadrupole splitting and calculated electric field gradient using STO-3G or MINI-4 were found to depend on the valence of tin atoms because of poor allowance for basis sets in describing highly polar molecules.     

Anodic stripping voltammetric determination of bismuth(III) using a Tosflex-coated mercury film electrode

A Tosflex-mercury film electrode (TMFE) was prepared by spin-coating a solution of the perfluorinated anion exchange polymer Tosflex onto a glassy carbon electrode surface followed by electrodeposition of mercury film on this electrode. This electrode was used for the determination of trace bismuth(III) which was preconcentrated onto the TMFE as anionic bismuth(III) complexes with chloride in a chloride medium. The preconcentration was carried out at a potential of-0.2 V, and the preconcentration of the bismuth(III) was enhanced significantly by the anion-exchange feature of Tosflex. The accumulated bismuth(III) was then determined by anodic square-wave stripping voltammetry (SWSV). Various parameters influencing the determination of bismuth(III) were examined in detail. With 2 min accumulation, the analytical signal versus concentration dependence was linear up to 50 ppb, and the detection limit was 0.58 ppb. This modified electrode showed good resistance to the interferences from surface-active compounds and common ions.     

Novel dye-attached macroporous films for cadmium, zinc and lead sorption: Alkali Blue 6B-attached macroporous poly(2-hydroxyethyl methacrylate)

Alkali Blue 6B-attached poly(2-hydroxyethyl methacrylate) (poly(HEMA)) microporous films were investigated as chelate forming sorbents for heavy metal removal. Poly(HEMA) microporous films were prepared by UV-initiated photo-polymerization of HEMA in the presence of an initiator (azobisisobutyronitrile (AIBN)). Alkali Blue 6B was attached covalently. These films with a swelling ratio of 58%, and carrying 14.8 mmol Alkali Blue 6B m(-2) which were then used in the removal of Cd(II), Zn(II) and Pb(II) from aqueous media. Adsorption rates were very high, equilibrium was achieved in about 30 min. The maximum adsorption of heavy metal ions onto the Alkali Blue 6B-attached films were 41.4 mmol m(-2) for Cd(II), 52.4 mmol m(-2) for Zn(II), and 64.5 mmol m(-2) for Pb(II). When the heavy metal ions competed during the adsorption from a mixture the adsorption values for Cd(II), Zn(II) and Pb(II) were quite close. Heavy metal ions were desorbed by using 0.1 M HNO(3). A significant amount of the adsorbed heavy metal ions (up to 95%) could be desorbed in 30 min. Repeated adsorption/desorption cycles showed the feasibility of these novel dye-attached microporous films for heavy metal removal.