Synthesis and thermal decomposition of lanthanide hexacyanochromate(iii) complexes,Ln[Cr(CN)6]·nH2O (Ln=La-Lu; n=3, 4)

New solid complex of nitrilotriacetic acid and bismuth trichloride was synthesized by a solid phase reaction of nitrilotriacetic acid and bismuth trichloride at room temperature. The composition of the sample is BiCl₃[N(CH₂COOH)₃]_2.5. The crystal structure of the complex belongs to triclinic system with the lattice parameters: α=0.7849 nm, β=0.9821 nm, χ=2.0021 nm, α=96.50°, β=98.76° and γ=90.49°. The far-infrared spectra show the bonding between the Bi ion and N atom of nitrilotriacetic acid. The thermal analysis also demonstrates the complex formation between the bismuth ion and nitrilotriacetic acid. The gaseous pyrolysis product and the final residue in the thermal decomposition process are determined to check the thermal decomposition reaction. This revised version was published online in August 2006 with corrections to the Cover Date.     

Spectral regions selection to improve prediction ability of PLS models by changeable size moving window partial least squares and searching combination moving window partial least squares

Changeable size moving window partial least squares (CSMWPLS) and searching combination moving window partial least squares (SCMWPLS) are proposed to search for an optimized spectral interval and an optimized combination of spectral regions from informative regions obtained by a previously proposed spectral interval selection method, moving window partial least squares (MWPLSR) [Anal. Chem. 74 (2002) 3555]. The utilization of informative regions aims to construct better PLS models than those based on the whole spectral points. The purpose of CSMWPLS and SCMWPLS is to optimize the informative regions and their combination to further improve the prediction ability of the PLS models. The results of their application to an open-path (OP)/FT-IR spectra data set show that the proposed methods, especially SCMWPLS can find out an optimized combination, with which one can improve, often significantly, the performance of the corresponding PLS model, in terms of low prediction error, root mean square error of prediction (RMSEP) with the reasonable latent variable (LVs) number, comparing with the results obtained using whole spectra or direct combination of informative regions for a compound. Regions consisting of the combinations obtained can easily be explained by the existence of IR absorption bands in those spectral regions.     

Synthesis, band structure, and optical properties of Ba2ZnV2O8

A novel compound Ba₂ZnV₂O₈ has been synthesized in high temperature solution reaction and its crystal structure has been characterized by means of single crystal X-ray diffraction analysis. It crystallizes in monoclinic system and belongs to space group P2₁/c with a=7.9050(16), b=16.149(3), , β=90.49(3). It builds up from 1-D branchy chains of [ZnV₂O₈⁴⁻]_∞, and the Ba²⁺ cations are located in the space among these chains. The IR spectrum, ultraviolet-visible diffuse reflection integral spectrum and fluorescent spectra of this compound have been investigated. The calculated results of energy band structure by the density functional theory method show that the solid-state compound of Ba₂ZnV₂O₈ is an insulator with direct band gap of 3.48 eV. The calculated total and partial density of states indicate that the top valence bands are contributions from the mixings of O-2p, V-3d, and Zn-3d states and low conduction bands mostly originate from unoccupied antibonding states between the V-3d and O-2p states. The V-O bonds are mostly covalence characters and Zn-O bonds are mostly ionic interactions, and the ionic interaction strength is stronger between the Ba-O than between the Zn-O. The refractive index of n_x, n_y, and n_z is estimated to be 1.7453, 1.7469, and 1.7126, respectively, at wavelength of 1060 nm for Ba₂ZnV₂O₈ crystal.     

Thermodynamic dissociation constants of N-phenylbenzohydroxamic acids and benzohydroxamic acid

Thermodynamic association constants of benzohydroxamic acid and several ortho-substituted N-phenylbenzohydroxamic acids have been determined by pH titration in aqueous dioxan media at 25 degrees and 35 degrees . Empirical pH corrections for mixed aqueous media have been applied. The pK(a) values do not vary linearly with the reciprocal of dielectric constant of the medium, but a plot of pK(a) vs. the mole fraction of dioxan is linear at a given temperature. Values of DeltaG degrees , DeltaH degrees and DeltaS degrees are tabulated.     

Equilibrium studies of the sorption of Cu(II) ions onto chitosan

Chitosan is a polymer that can be obtained from the shells of seafood such as prawns, crabs, and lobsters. Chitosan has free amino groups, which can attract metal ions, and has been used as an adsorbent for the removal of metal ions from effluents. In this research, the sorption of copper ions from solution onto chitosan at two pHs has been investigated. DSC, TGA, surface area, SEM, and NMR studies have been used to report the pure physical states of chitosan and the chitosan-copper complex. The experimental isotherm data were analyzed using the Langmuir, Freundlich, and Redlich-Peterson equations. Correlation coefficients were determined for each isotherm analysis. Error functions have been used to determine the alternative single component parameters by nonlinear regression due to the inherent bias in using the correlation coefficient resulting from linearization. The error function method provided the best parameters for the isotherm equations in this system and is demonstrated for error comparison purposes.     

Determination of volatile components in peptic powder by gas chromatography-mass spectrometry and chemometric resolution

Gas chromatography-mass spectrometry (GC-MS) coupled with chemometric resolution upon two-dimensional data was proposed as a method for the analysis of volatile components in a traditional Chinese medicinal preparation peptic powder which contains Rhizoma Atractylodis, Pericarpium Citri Reticulatae, Cortex Magnoliae Officinalis and Radix Glycyrrhizae. Ninety-three components were separated and 65 of them were qualitatively and quantitatively analyzed which represented about 90.28% of the total content. With the help of chemometric resolution, the data were resolved into a pure chromatogram and a mass spectrum of each chemical component. The accuracy of qualitative and quantitative results was greatly improved by using the two-dimensional comprehensive information of chromatograms and mass spectra. The example showed that chemometric resolution could greatly enhance separation ability. This makes it possible to analyze complicated practical systems like traditional Chinese medicinal preparations with the help of coupled instruments and chemometric resolution methods.     

Diastereoselective inter- and intramolecular pinacol coupling of aldehydes promoted by monomeric titanocene(II) complex Cp(2)TiPh

A monomeric titanocene(III) derivative, Cp(2)TiPh, effectively promoted the pinacol coupling of both an aromatic aldehyde, benzaldehyde, and an aliphatic aldehyde, 3-phenylpropionaldehyde. The same reactive complex was successfully generated by a catalytic amount of a precursor, Cp(2)Ti(Ph)Cl, and its stoichiometric amount of Zn. The Cp(2)TiPh-catalyzed pinacol coupling of benzaldehyde derivatives and aliphatic aldehydes afforded the corresponding 1,2-diols in high yields with moderate to good threo-selectivity. On the other hand, Cp(2)TiPh-catalyzed pinacol cyclization of dials gave cyclic 1,2-diols with excellent diastereoselectivity. The extension of this protocol to chiral dials demonstrated that the phenyltitanium complex catalytically transmitted an axial chirality or a central chirality of the starting dials to the central chirality of the resultant 1,2-diols.     

Polymerization and copolymerization of methacrylic esters derived from glycidyl methacrylate

Copolymerization of methacrylic esters derived from glycidyl methacrylate and nucleophiles with styrene was carried out. The monomer reactivity ratios of these methacrylic esters were varied with the alkoxy groups of the esters and the solvent used.     

Dosage polarographique du brome a l'echelle du nanogramme: Application à la determination du brome sanguin et urinairePolarographic determination of bromide at nanomolar levels. Application to the determination of bromide in blood and urine

Polarographic determination of bromide at nanomolar levels. Application to the determination of bromide in blood and urine.Colorimetric methods for bromide determination lack adequate sensitivity for normal levels in biological fluids. A sensitive amplification process is recommended: bromide is oxidized to bromate with hypochlorite; after reaction between bromate and excess of bromide, the bromine formed is extracted into chloroform and then reduced to bromide by ammonia; these different steps can be repeated. Alternating current polarography of bromate allows selective evaluation in biological fluids. The detection limit is 10^-6 M and can be reduced to 10^-9 M with further amplification steps. The effects of iodide and of instrumental parameters are discussed.     

Spectrophotometry Determination of Copper and Palladium Using Some 1,3,5-Triphenylformazans

A new rapid and accurate method for the spectrophotometric microdetermination of Cu(II) and Pd(II) using some 1,3,5-triphenylformazans (I) is given. The optimum conditions for the formation of the complexes are extensively investigated. The ligands form 1:1 and 1:2 (M:L) complexes with Cu and Pd ions, Beer's law is obeyed up to 3.8 and 6.5 ppm Cu and Pd respectively. The influence of foreign ions is investigated. The ligands were used successfully as indicators in spectrophotometric titration of Cu and Pd ions with EDTA and CDTA.