Preparation and characterization of nanosized TiO2 powder as an inorganic adsorbent for aqueous radionuclide Co(II) ions

In this research TiO₂ sample was synthesized by a simple sol–gel method and was characterized by X-ray diffraction (XRD), Transmission electron microscopy (TEM) and Brunauer–Emmett–Teller (BET) techniques. The XRD result indicated that the obtained product was anatase titanium dioxide with high purity, the TEM image clearly showed that the particle sizes of TiO₂ nanoparticles were in the range of 30–70 nm, and the measured BET surface area of the heated TiO₂ nanoparticles was 147.14 m²/g. In this work, the prepared TiO₂ sample was used as a new adsorbent for the adsorption of radionuclide Co(II) ions from aqueous solutions, and the influence of pH, contact time, ionic strength and temperature in the presence or absence of humic acid/fulvic acid (HA/FA) were also investigated. The experimental results indicated that the adsorption of Co(II) ions onto TiO₂ was strongly pH-dependent. Based on the surface complexation, the presence of HSs enhanced the adsorption of Co(II) ions and the influence of Co(II) adsorption onto FA–TiO₂ hybrids was much stronger than that of HA–TiO₂ at pH values of 2.0–9.0. Adsorption of Co(II) ions onto TiO₂ powder was strongly dependent on ionic strength. The adsorption process mainly occured in the first contact time of 2 h and could be fitted by a pseudo-second-order rate model. The calculated thermodynamic data indicated that the adsorption of Co(II) ions onto TiO₂ was a spontaneous process and favorable at high temperatures.     

Heat-Induced Formation of Monodisperse Gold Nanoparticles in Different Conditions

We investigate the preparation of nearly monodisperse gold nanoparticles by heat treatment in different conditions. The effects of various solvents, heating temperature, and heating time length on the monodispersity of gold nanoparticles were studied systematically and a general route to generate gold nanoparticles with uniform size was determined. The first step was to prepare gold nanoparticles with less than 3 nm and the following operation was to heat the gold nanoparticles in the present of thiolated solvents where monodispersed gold nanoparticles could be obtained easily. Our approach has enriched synthesis of monodisperse gold nanoparticles, and may provide some valuable experimental data about how the heating process affects the size evolution of gold nanoparticles.     

A Correlation of the Drag Force Coefficient on a Sphere with Interface Slip at Low and Intermediate Reynolds Numbers

The hydrodynamics of a sphere with interface slip has been numerically investigated for flows of Reynolds number ranging 0 < Re ≤ 75. A simple correlation of the drag force coefficient in the present of interface slip has been derived based on our numerical simulations. The correlation takes the slip coefficient and Reynolds number as two input parameters. By comparing results found in the literature, we believe that the present correlation is more accurate; it provides a source for future experiment study and for numerical simulations of large multi-particle system where the interface slip is important.     

Synthesis and Properties of Aromatic Side Chained N‐Acyltaurate Surfactants

A series of anionic N‐acyltaurate surfactants, side chain containing aromatic nucleus (abbreviated as SAATT), were synthesized via Williamson reaction, hydrolyzation, and acylation. Krafft temperatures and surface properties of these surfactants at 30°C, that is, critical micelle concentration, cmc, surface excess concentration, Γ_max, surface area demand per molecule, A _min, efficiency in surface tension reduction, pC₂₀, effectiveness in surface tension reduction, π_cmc, and cmc/C₂₀ parameter were determined. It was shown that these surfactants exhibit good solubility which was confirmed by measuring Krafft temperature. The cmc of SAATT was much smaller than that of conventional surfactants with similar effective carbon numbers, and shifted to lower concentration with increasing hydrocarbon chain length. In addition, the γ_cmc decreased with decrease in Γ_max. The pC₂₀ and the cmc/C₂₀ got larger with the increase in hydrocarbon chain length. From the fluorescence intensity ratios of I ₁ (373 nm) and I ₃ (384 nm) using pyrene as a probe, it was indicated that the molecules of SAATT formed loose micelles with a broad size distribution.     

Synthesis of Two Schiff Base Transition Metal Complexes Bearing Morpholine Side Chains and Kinetics of PNPP Catalytic Hydrolysis in Brij35 Micelle

Two Schiff base transitional metal complexes bearing morpholine side chains were synthesized and characterized, and were used as a simulative hydrolase in the catalytic hydrolysis of p‐nitrophenyl picolinate (PNPP) in this article. A mechanism of PNPP catalytic hydrolysis in the Brij35 micellar solution was proposed and supported by the results of the spectral analysis and the kinetic calculation. The kinetic model of PNPP catalytic hydrolysis was studied. The some kinetic and the thermodynamic constants on the catalytic reaction were calculated. The results of the study show that the metallomicelle made up of the Schiff base transitional metal complexes and Brij35 micelle revealed a good catalytic activity in PNPP catalytic hydrolysis; the rate of the PNPP catalytic hydrolysis is increased following the increase of the pH values in the buffer solution and affected by the polarization action of metal ion of complex.     

Effect of Demulsifiers on Dilatational Properties of Crude Oil–Water Interfaces

The dilatational properties of polyether demulsifiers PEA, PEB, PEC, PED, PEF, and PEG at the decane-water interface were investigated. Meanwhile, the effect of demulsifiers with different structures on interfacial dilatational modulus of diluted crude oil also was explored. The properties of demulsifiers are compared and analyzed in combine with the dilatational parameters at decane-water interface and at 5% crude oil-water interface. The results show that interfacial dilatational viscoelasticity could characterize the interfacial behavior of demulsifiers. The demulsifiers, which have different kinds or structures, have different effects on destroying the interfacial film of crude oil with increasing bulk concentration. Therefore, the dosage of demulsifier is a very important role in controlling nature of crude oil film.     

I~-的光电化学氧化与光助充电二次锂离子电池

采用扫描电子显微镜、X射线衍射和粉末微电极分别考察了TiO2粉末的形貌、结构以及氧化I-的光电化学行为.结果表明,TiO2粉末晶型为锐钛矿,粒径在100～200 nm范围内.在光照条件下,在TiO2半导体电极上电化学氧化I-生成I2的超电势数值降低约1 V.以TiO2/ITO和Li4Ti5O12分别作为正负极,电解液为碳酸丙烯酯(PC)+LiClO4+LiI,并以聚偏氟乙烯(PVDF)作为隔膜构成分隔式电解池,进行整体电解并结合紫外-可见光谱进行分析.结果表明,该装置在光照条件下电池充电电压比非光照条件下的充电电压降低约0.9 V,且充电效率接近100%.该光电化学装置是一种可以利用光能充电的二次锂离子电池.     

醋酸溶液中Pd-CuPc/Y催化甲烷选择氧化制甲醇

以氯化铜、钼酸铵、苯酐、氯化铵、尿素和NaY分子筛为原料,采用苯酐-尿素法制备了酞菁铜/分子筛复合物CuPc/Y.采用等体积浸渍法将金属钯担载在CuPc/Y上制备了Pd-CuPc/Y催化剂,并在醋酸水溶液中考察了其催化甲烷选择氧化合成甲醇反应的性能,结果表明,催化性能与反应温度、溶剂中CH₃COOH与H₂O的混合比例、对苯醌用量、反应时间等因素有关,在0.5%Pd-0.5%CuPc/Y添加量0.5 g、CH₃COOH与H₂O体积比4∶1、对苯醌用量1 000 μmol、反应时间3 h、反应温度150 ℃的条件下,甲醇的最佳生成量为1 840 μmol.Pd-CuPc/Y催化剂可以多次循环使用,但由于催化剂流失和催化剂表面的钯粒子聚集的原因,循环使用后的催化剂催化活性有所下降.Pd-CuPc/Y在醋酸溶液中催化甲烷选择氧化合成甲醇是亲电取代反应和活性氧物种氧化共同作用的结果.     

Synthesis and liquid crystalline properties of substituted 2,5‐diaryl 1,3,4‐oxadiazole derivatives without flexible chains

A series of new compounds based on aromatically 2,5‐disubstituted 1,3,4‐oxadiazoles without flexible chains, formulated as p‐R–C₆H₄–(OC₂N₂)–(p‐C₆H₄)₂–R′ with (i) R = CH₃O, R′ = CH₃O, CH₃S, F, H (Ia–Id), (ii) R = CH₃S, R′ = CH₃O, CH₃S, F, H (IIa–IId) and (iii) R = F, R′ = CH₃O, CH₃S, F, H (IIIa–IIId) (p‐C₆H₄ and OC₂N₂ represent a p‐phenylene spacer and a 1,3,4‐oxadiazole ring, respectively), were synthesised and characterised by ¹H and ¹³C NMR, MS and HRMS techniques. Mesomorphic properties were investigated using differential scanning calorimetry and polarizing optical microscopy. All of the target compounds (except Id, IId, IIIc and IIId) exhibited an enantiotropic nematic mesophase with high melting temperatures. The liquid crystalline properties of these compounds were influenced greatly by polarity, steric factors and positions of the terminal groups. The effect of the terminal groups on the liquid crystal properties is discussed.     

Frontal polymerization synthesis and characterization of temperature- and pH-sensitive hydrogels

The temperature- and pH-sensitive hydrogels, poly(N-isopropylacrylamide-co-acrylic acid) (P(NIPAM-co-AAc)), were synthesized via frontal polymerization (FP). The reaction components have been varied in order to find their influences on frontal parameters and copolymer features. The results showed that front velocity and front temperature were dependent on the initiator concentration, reactant dilution, and NIPMA/AAc molar ratio. In addition, the morphology and sensitive behavior of the FP hydrogels were mainly affected by monomers’ ratio. Namely, the pore size, swelling abilities, LCST, and response kinetics of copolymer hydrogels obviously increased with the increasing acrylic acid concentration; however, they slightly changed with varying of amounts of initiator and solvent. Finally, in comparison with the hydrogels prepared by conventional batch polymerization, the ones synthesized by frontal polymerization exhibited more homogeneous chain composition and improved microstructure and response ability.