Pesticide Multi-Residue Analysis in Tea Using d-SPE Sample Cleanup with Graphene Mixed with Primary Secondary Amine and Graphitized Carbon Black Prior to LC–MS/MS

Graphene is a novel class of carbon nanostructures with ultrahigh specific surface area. Graphene has already been used in many fields and has great promise for use in sorbent materials. In this study, we used graphene mixed with primary secondary amine (PSA) and graphitized carbon black (GCB) as dispersive solid-phase extraction materials for the cleanup of tea for the first time. Compared to the literature, the amount of PSA and GCB was greatly reduced. A multi-residue method combined with liquid chromatography–tandem mass spectrometry was validated for rapid determination of 25 pesticide residues in tea. Green tea, black tea, and white tea were selected as matrixes, representing the majority of tea types. Recoveries ranged from 71.1 to 108.3 % and consistent relative standard deviations <13.6 % for all 25 pesticides. Graphene has significant potential as a promising new adsorbent for pesticide residue analysis of teas. This method can be used to analyze tea samples with different degrees of fermentation.     

维布妥昔单抗关键中间体的合成工艺优化

本研究对维布妥昔单抗关键中间体(1)的合成工艺进行了改进与优化。以芴甲氧羰基-L-缬氨酸琥珀酰亚胺酯(2)为起始原料,先后经酯的氨解反应、酰胺化、Fmoc脱保护、酰胺化与酯交换反应制得目标产品1,总收率11.6%,纯度99.2%,产物结构经1H NMR, 13C NMR和HRMS表征。优化后的工艺路线具有反应条件温和、可操作性强、生产过程更安全的特点。在初步放大试验中,首步投料量达百克级别,并已完成三批工艺验证,适合于工业化生产。     

Fluorenylvinylenes bridged triphenylamine-based dyes with enhanced performance in dye-sensitized solar cells

We have synthesized a series of new dipolar organic dyes Bn (n=0, 1, 2) employing triarylamine as the electron-donor, 2-cyanoacrylic acid as the electron-acceptor, and fluorenevinylene as the conjugated bridge, which were used as sensitizers in dye-sensitized solar cells. It is found that the solar-energy-to-electricity conversion efficiencies of the prepared DSSCs are in the range of 2.79-5.56%, which reach 35-70% of a standard device based on N719 fabricated and measured under the same conditions. The DSSC sensitized with B1 with balanced length of conjugated bridge shows the highest photo-to-electrical energy conversion efficiency and the open-circuit photovoltage (V_oc) of 0.86 V.     

1,5-二取代六氢三嗪-2-N-硝基亚胺的合成和杀虫活性的测定

以S-甲基-N-硝基异硫脲、取代苄胺为原料,依次经过亲核取代反应,Mannich反应合成了12个未见文献报道的1,5-二取代六氢三嗪-2-N-硝基亚胺(2a～21),结构经1H NMR,IR和元素分析确证.初步的杀虫活性测试表明,该类化合物在500mg/L时对稻飞虱具有较好的杀虫活性.     

Hydrothermal synthesis of core-shell structured PS@GdPO<Subscript>4</Subscript>:Tb<Superscript>3+</Superscript>/Ce<Superscript>3+</Superscript> spherical particles and their luminescence properties

Non-aggregated spherical polystyrene (PS) particles were coated with GdPO₄:Tb³⁺/Ce³⁺ phosphor layers by a conventional hydrothermal synthesis using poly(vinylpyrrolidone) (PVP) as an additive without further annealing treatment. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), photoluminescence (PL), as well as luminescence decay experiments were used to characterise the resulting core-shell structured PS@GdPO₄:Tb³⁺/Ce³⁺ samples. The results of XRD indicated that the PS particles were successfully coated with the GdPO₄:Tb³⁺/Ce³⁺ phosphor layers, which could be further verified by the images of FESEM. Under ultraviolet excitation, the PS@GdPO₄:Tb³⁺/Ce³⁺ phosphors show Tb³⁺ characteristic emission, i.e. ⁵D₄-⁷F_J (J = {6, 5, 4, 3}) emission lines with green emission ⁵D₄-⁷F₅ (543 nm) as the most prominent group. The core-shell phosphors so obtained have potential applications in field emission display (FED) and plasma display panels (PDP).     

Controllable photoluminescence properties of an anion-dye-intercalated layered double hydroxide by adjusting the confined environment

This article reports a novel method to tune the photoluminance properties of ammonium 1-anilinonaphthalene-8-sulfonate (ANS) in a 2D matrix of layered double hydroxide (LDH) by changing the interlayer microenvironment. ANS and a series of surfactants with different alkyl chain lengths (pentanesulphonate (PES), hexanesulphonate (HES), heptanesulphonate (HPS), decanesulphonate (DES), and dodecylsulphonate (DDS)) were respectively cointercalated into the galleries of ZnAl-LDH by the anion exchange method. Thin films of ANS/surfactant-LDHs obtained by the solvent evaporation method possess good c orientation as revealed by XRD and SEM. It was found that the ANS/HPS-LDH film showed the maximum fluorescence efficiency and the longest intensity-average lifetime among these ANS/surfactant-LDH composites owing to the "size-matching" rule between the organic dye and surfactant. Moreover, the fluorescence properties can be tuned by changing the relative molar ratio of ANS/HPS, and the film containing 20% ANS (molar percentage, expressed as ANS(20%)/HPS-LDH) exhibits the maximum fluorescence efficiency, the longest average lifetime, and significantly enhanced photo and thermal stability. In addition, the composite films show fluorescence anisotropy, attributed to the preferential orientation of ANS in the LDH gallery. Therefore, this work demonstrates a feasible approach to tuning the photoluminescence properties of a dye confined in an inorganic 2D matrix via changing the interlayer microenvironment, which may be considered to be a good candidate for solid photoluminescence materials, nonlinear optics, and polarized luminescence materials.     

Improvement of antifungal activity of carboxin by inclusion complexation with cucurbit[8]uril

Interaction between cucurbit[8]uril (Q[8]) with a fungicide, carboxin in aqueous solution, was investigated by ¹H-NMR, electronic absorption spectroscopy, and fluorescence spectroscopy. Spectroscopy analysis established a basic interaction model which formed an inclusion complex with a host:guest ratio of 1:1. ¹H-NMR showed that Q[8] encapsulated the phenyl ring into its cavity and the rest of the guest molecule stayed outside the host. Comparative in vitro evaluations of the growth inhibitory effects of the inclusion complex solution toward Rhizoctonia solani demonstrated appreciable improvements in the antifungal activity of carboxin through the addition of Q[8]. In comparison with the positive control, improvement was evaluated in terms of area covered by the mycelia of R. solani and their growth inhibition rate. Inclusion complexation of carboxin with Q[8] suggests a potential means for production of an environmentally friendly carboxin-based fungicide to counteract R. solani.     

Determination of explosives based on novel type of sensor using porphyrin functionalized carbon nanotubes

The hydroxide of meso-tetraphenylporphyrin derivatives functionalized carbon nanotubes (CNTs) was fabricated in our research to explore the interaction between porphyrin and explosive. It was turned out that in the formation of grid porphyrin film, carbon nanotubes as a cruciul base materials promoted the electron transfer rate. Most of important, the results also showed that the electrochemical response was enhanced through increasing the number of -OH substitution in porphyrin. Such information provides the platform for a practical strategy for rational design of the sensor of explosives.     

One‐step electrodeposition of amorphous carbon films containing WO3 with high conductivity and good wettability

Tungsten trioxide‐incorporated hydrogenated amorphous carbon (WO₃/a‐C:H) films have been fabricated on a single‐crystal silicon wafer by liquid phase electrodeposition using methanol as carbon source and tungsten carbonyl as incorporated reagent. The morphology, composition and structure of the films have been investigated by SEM, XPS, Raman scattering spectroscopy, Fourier transform infrared spectroscopy (FTIR) and Transmission electron microscope (TEM), respectively. The effects of WO₃ incorporation on the electrical and wetting properties were studied in detail. The characterization results showed that tungsten trioxide nanocrystalline particles with diameters in the range of 10–20 nm were homogenously embedded in the amorphous carbon films. Also, the electrical conductivity and wetting ability of the films were strongly improved due to the contribution of the tungsten trioxide. Copyright © 2010 John Wiley & Sons, Ltd.     

One-dimensional GdVO4:Ln (Ln=Eu, Dy, Sm) nanofibers: Electrospinning preparation and luminescence properties

One-dimensional GdVO₄:Ln³⁺ (Ln=Eu, Dy, Sm) nanofibers have been prepared by a combination method of sol-gel process and electrospinning technology. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), photoluminescence (PL), quantum efficiency (QE), and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. The XRD, FT-IR, and TG-DTA results show that GdVO₄:Ln³⁺ nanofibers samples crystallize at 700 °C. SEM images indicate that the as prepared precursor fibers are smooth. After being calcined at 700 °C for 4 h, the fibers still maintain their fiberlike morphology with rough surface. TEM image further manifests that the GdVO₄:Ln³⁺ nanofibers consist of nanoparticles. Under ultraviolet excitation and low-voltage electron beam excitation, GdVO₄:Ln³⁺ phosphors showed their strong characteristic emission due to an efficient energy transfer from vanadate groups to dopants. The optimum doping concentration of Ln³⁺ in the GdVO₄ nanofibers also has been investigated.