乙烯砜型染料与丙烯腈的水相沉淀聚合

乙烯砜型染料与丙烯腈的水相沉淀聚合吴致宁，张雪松，杨锦宗大连理工大学精细化工系，大连，１１６０１２）关键词高分子染料、沉淀共聚合、乙烯砜型染料、丙烯腈近年来，随着人们对功能材料具有高附加值的认识的不断深人，特别是伴随各类功能性染料结构的开发，高分子染...     

The Self-catalytic Esterification Reaction of O-Phosphoryl Serine Derivative

O-Phosphoryl serine derivative can perform serf-catalytic esterification reaction in the mixture of CH3OH and CHCl3 at the room temperature. The phosphoryl group participation was the key step of the esterification. This type of reactions were proposed through an intermediate of mixed phosphoric-carboxylic anhydride that might provide a clue to the function of the phosphoryl group in the phosphorylated enzymes and in the prebiotic synthesis of protein.     

表面活性剂对纤维素接枝共聚物溶液粘度性质的影响

研究了阴离子十二烷基硫酸钠(SDS)、阳离子十六烷基三甲基溴化铵(CTAB)和非离子聚乙二醇辛基苯基醚(OP)等三种不同类型的表面活性剂对疏水化水溶性两性纤维素接枝共聚物(CGAO)溶液粘度性质的影响.结果表明,在SDS和OP的临界胶束浓度(cmc)附近，CGAO溶液粘度最大，SDS引起CGAO粘度的变化大于OP；即使在CTAB的cmc附近，随着CTAB浓度的增加，CGAO的粘度一直呈下降趋势；非疏水改性的纤维素接枝共聚物的溶液粘度随SDS或CTAB浓度的增加而下降，但几乎不随OP浓度的增大而变化.此外，通过凝胶渗透色谱法测得的保留时间证实了SDS、CTAB和OP与CGAO之间的疏水缔合作用.     

载体γ-Al2O3和钐对非晶态NiB合金热稳定性的影响

用化学还原法制备了NiB、NiB/Al2O3和NiBSm/Al2O3三种催化剂，它们都呈非晶结构.用等离子耦合发射光谱仪(ICP)对催化剂组分进行了分析，采用差示扫描量热法（DSC）对三种催化剂进行了热稳定性分析.结果表明，载体的引入使非晶态NiB合金的体相组成中B的含量降低.将非晶态NiB合金负载到γ-Al2O3上,可以明显改善非晶态合金的热稳定性，少量Sm可以进一步提高晶化温度.晶化激活能数据亦表明了载体和Sm对非晶结构具有良好的稳定作用.载体和Sm可能通过不同的作用提高了非晶态合金的热稳定性.     

Novel Gel—like Process for Synthesizing Submicron LiaNi0.8Co0.2O2 Powders Used in Lithium Ion Batteries

A novel gel-like process has been developed for synthesizing LiaNi0.8Co0.2O2 powders,using citric acid as a chelating agent. This process improves the homogeneity of constituent cation and enhances their reactivity in the obtained precursor. The results of electrochemical test demonstrated that these materials exhibited excellent electrochemical properties. Its initial capacity reached 181.6 mAh/g and reversible efficiency at the first cycle is about 88.6%.     

在吡啶溶剂中氯化镍催化的溴代芳烃自身偶联反应

Pyridine was used as a solvent for homocoupling of aryl bromides catalyzed by nickel chloride/triarylphosphinein the presence of zinc and recycled easily.Triphenylphosphine was the best ligand for nickel in this coupling reac-tion.     

Tuning cell adhesion on gradient poly(2-hydroxyethyl methacrylate)-grafted surfaces

A simple yet versatile method was developed to prepare a low-density polymerization initiator gradient, which was combined with surface-initiated atom transfer radical polymerization (ATRP) to produce a well-defined poly(2-hydroxyethyl methacrylate) (HEMA) gradient substrate. A smooth variation in film thickness was measured across the gradient, ranging from 20 A to over 80 A, but we observed a nonmonotonic variation in water contact angle. Fits of X-ray reflectivity profiles suggested that at the low graft density end, the polymer chain structure was in a "mushroom" regime, while the polymer chains at high graft density were in a "brush" regime. It was found that the "mushroom" region of the gradient could be made adhesive to cells by adsorbing adhesion proteins, and cell adhesion could be tuned by controlling the density of the polymer grafts. Fibroblasts were seeded on gradients precoated with fibronectin to test cellular responses to this novel substrate, but it was found that cell adhesion did not follow the expected trend; instead, saturated cell adhesion and spreading was found at the low grafting density region.     

Universal and high-fidelity DNA single nucleotide polymorphism detection based on a CRISPR/Cas12a biochip

Single nucleotide polymorphisms (SNPs) are associated with many human diseases, so accurate and efficient SNP detection is of great significance for early diagnosis and clinical prognosis. This report proposes a universal and high-fidelity genotyping method in microfluidic point-of-care equipment based on the clustered regularly interspaced short palindromic repeat (CRISPR) system. Briefly, by systematically inserting the protospacer-adjacent-motif (PAM) sequence, we improved the universality of the CRISPR/Cas12a based SNP detection; by removing the complementary ssDNA and introducing an additional nucleotide mismatch, we improved the sensitivity and specificity. We preloaded the CRISPR/Cas12a reagents into the point-of-care biochip for automating the process, increasing the stability and long-term storage. This biochip enables us to rapidly and conveniently detect the genotypes within 20 min. In a practical application, the CRISPR/Cas12a biochip successfully distinguished three genotypes (homozygous wild type; the homozygous mutant type; and the heterozygous mutant type) of the CYP1A1*2 (A4889G, rs1048943), CYP2C19*2 (G681A, rs4244285), CYP2C9*3 (A1075C, rs1057910), and CYP2C19*3 (G636A, rs4986893) genes related to multiple cancers from 17 clinical blood samples. This CRISPR/Cas12a-based SNP genotyping method, being universal, accurate, and sensitive, will have broad applications in molecular diagnostics and clinical research.

A universal and high-fidelity genotyping method based on the clustered regularly interspaced short palindromic repeat (CRISPR) system was performed on the microfluidic point-of-care equipment.     

Synthesis, Structure, and Properties of a Model for Galactose Oxidase

An active-site analog of the radical copper enzyme galactose oxidase has been prepared from a synthetic tripod chelate ((2-pyridylmethyl)[(2-hydroxy-3,5-dimethylphenyl)methyl][(2-hydroxy-5-methyl-3-(methylthio)phenyl)methyl]amine, duncamine (dnc)) that binds a single Cu(II) ion through phenolate, thioether-substituted phenolate, and pyridylamine arms. The Cu complex crystallizes as a dinucleated dimer bridged by phenolate oxygens, and the structure has been determined by X-ray crystallography. Addition of pyridine (or other coordinating bases) dissociates the complex into a monomeric derivative that has been characterized spectroscopically (optical absorption and EPR) and electrochemically. The model provides insight into the properties of a mutant form of galactose oxidase which retains the same copper ligand complement as the wild type protein but lacks catalytic activity.     

Multi-stage portfolio selection problem with dynamic stochastic dominance constraints

We study the multi-stage portfolio selection problem where the utility function of an investor is ambiguous. The ambiguity is characterized by dynamic stochastic dominance constraints, which are able to capture the dynamics of the random return sequence during the investment process. We propose a multi-stage dynamic stochastic dominance constrained portfolio selection model, and use a mixed normal distribution with time-varying weights and the K-means clustering technique to generate a scenario tree for the transformation of the proposed model. Based on the scenario tree representation, we derive two linear programming approximation problems, using the sampling approach or the duality theory, which provide an upper bound approximation and a lower bound approximation for the original nonconvex problem. The upper bound is asymptotically tight with infinitely many samples. Numerical results illustrate the practicality and efficiency of the proposed new model and solution techniques.