Role of TRPM8 in dorsal root ganglion in nerve injury-induced chronic pain

Background

Chronic neuropathic pain is an intractable pain with few effective treatments. Moderate cold stimulation can relieve pain, and this may be a novel train of thought for exploring new methods of analgesia. Transient receptor potential melastatin 8 (TRPM8) ion channel has been proposed to be an important molecular sensor for cold. Here we investigate the role of TRPM8 in the mechanism of chronic neuropathic pain using a rat model of chronic constriction injury (CCI) to the sciatic nerve.

Results

Mechanical allodynia, cold and thermal hyperalgesia of CCI rats began on the 4th day following surgery and maintained at the peak during the period from the 10th to 14th day after operation. The level of TRPM8 protein in L5 dorsal root ganglion (DRG) ipsilateral to nerve injury was significantly increased on the 4th day after CCI, and reached the peak on the 10th day, and remained elevated on the 14th day following CCI. This time course of the alteration of TRPM8 expression was consistent with that of CCI-induced hyperalgesic response of the operated hind paw. Besides, activation of cold receptor TRPM8 of CCI rats by intrathecal application of menthol resulted in the inhibition of mechanical allodynia and thermal hyperalgesia and the enhancement of cold hyperalgesia. In contrast, downregulation of TRPM8 protein in ipsilateral L5 DRG of CCI rats by intrathecal TRPM8 antisense oligonucleotide attenuated cold hyperalgesia, but it had no effect on CCI-induced mechanical allodynia and thermal hyperalgesia.

Conclusions

TRPM8 may play different roles in mechanical allodynia, cold and thermal hyperalgesia that develop after nerve injury, and it is a very promising research direction for the development of new therapies for chronic neuroapthic pain.

     

Efficient two-photon sensitized luminescence of europium （Ⅲ） complex based on hypersensitive transitions

Red frequency-upconversion fluorescence emission is observed in europium(Ⅲ) complex with encapsulating polybenzimidazole tripodal ligands, pumped with 930- and 1070-nm picosecond laser pulses. The lumines- cence of transition 5D0 →7F2 (612 nm) is induced by two-photon absorption of hypersensitive transitions 7F0 →5D2 (465 nm) and 7F1 →5D1 (535 nm). Analysis results suggest that the two-photon excitation strength of these hypersensitive transitions is increased dramatically owing to the C3 symmetry of the coordination field.     

Improved device performance in nonpolar a ‐plane GaN LEDs using a Ni/Al/Ni/Au n‐type ohmic contact

The authors report upon the increased light‐output power (P_out) via a reduction in the forward voltage (V_f) for nonpolar a ‐plane GaN LEDs using Ni/Al/Ni/Au n‐type ohmic contacts. The specific contact resistivity of the Ni/Al/Ni/Au contact is found to be as low as 5.6 × 10^–5 whereas that of a typical Ti/Al/Ni/Au contact is 6.8 × 10^–4 Ω cm², after annealing at 700 °C. The X‐ray photoelectron spectroscopy results show that the upward surface band bending is less pronounced for the Ni/Al contact compared to the Ti/Al contact, leading to a decrease in the effective Schottky barrier height (SBH). The V_f of the nonpolar LEDs decreases by 10% and P_out increases by 15% when the Ni/Al/Ni/Au scheme is used instead of the typical Ti/Al/Ni/Au metal scheme. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Experimental study of resistive bistability in metal oxide junctions

We have studied resistive bistability (memory) effects in junctions based on metal oxides, with a focus on sample-to-sample reproducibility, which is necessary for the use of such junctions as crosspoint devices of hybrid CMOS/nanoelectronic circuits. Few-nm-thick layers of NbO _x , CuO _x and TiO _x have been formed by thermal and plasma oxidation, at various deposition and oxidation conditions, both with and without rapid thermal post-annealing. The resistive bistability effect has been observed for all these materials, with particularly high endurance (over 10³ switching cycles) obtained for single-layer TiO₂ junctions, and the best reproducibility reached for multi-layer junctions of the same material. Fabrication optimization has allowed us to improve the OFF/ON resistance ratio to about 10³, but the sample-to-sample reproducibility is so far lower than that required for large-scale integration.     

Dy3+激活无水芒硝在真空紫外光激发下的发光性质

在空气中900℃温度下,将纯天然无水芒硝( Na2 SO4)和DyF3的混合粉末加热25 min,制备了Na2SO4:Dy3+新型发光材料.通过同步辐射研究了NaSO4:Dy3+的发光性质.并测量了在室温中真空紫外-紫外光下的发射和激发光谱.根据发射光谱得到了不同Dy3+掺杂浓度和不同激发下发光的黄蓝比(Y/B)是不同的.通过监测黄色发光得到的激发光谱,分别由Dy3+,4f9→4f85d跃迁(172 nm)、O2--Tm3+之间的电荷转移带(165 nm)引起的强激发谱和基质吸收(138,245 nm)、对应Dy3+,6 H15/2→4 D7/2,6H15/2→6 P3/2,6 H15/2→6P7/2跃迁(299,325,351nm)引起的弱激发谱组成.     

基于正交投影散度的高光谱遥感波段选择算法

由于高光谱数据的海量高维特征,对其进行降维处理成为高光谱遥感研究的一个重要问题.波段选择算法由于能够有效地保留原始数据的信息,在高光谱数据降维及后续的遥感识别与分类等方面具有明显的优越性.文章提出了一种基于正交投影散度(OPD)的波段选择方法,该方法继承了正交子空间投影(OSP)算法的特点,通过把原始数据投影到特征空间...     

纳米银粒子表面增强拉曼光谱在宠物饲料中三聚氰胺的速测研究

研究将制备的纳米银粒子作为表面增强拉曼光谱的增强试剂,实现对宠物饲料中三聚氰胺的快速定性定量分析。以709与1542cm-1处拉曼位移作为定性依据,以1149cm-1峰强度作为归一化标准,在1.0～10.0mg·kg-1浓度范围实现定量计算,检测限0.5mg·kg-1。研究发现,纳米银粒子对三聚氰胺具有较强的拉曼增强效应,特征峰信号强度与纳米银粒子加入时间,溶液涡旋强度有很大的关系,同时也受提取溶剂的种类、提取方式及样品加入量的影响。本方法中每个样品5min内完成分析,与现有方法相比,快速简便,对宠物饲料中三聚氰胺实现现场、快速检测。     

光辐射吸收材料表面形貌与吸收率关系研究

光辐射吸收材料不同的表面形貌对入射光具有不同的多重反射吸收效果,对光辐射的吸收有较大的影响,合适的表面形貌可以提高光辐射有效吸收率.本文通过光线追迹的方法对V形表面、正弦表面、具有正态倾角(平均倾角)分布的表面以及具有正态高度分布的表面进行模拟, 分析了这四种表面对光辐射吸收率的提升效果及其入射角特性.通过倾角分布分析,得出不同表面形貌提升吸收率共同的必要条件,即倾角中心分布至少大于30°,并指出V形表面在正入射时对吸收率提升的优越性. 关键词： 光吸收材料 表面形貌 吸收率 表面倾角分布     

Si(001)衬底上分子束外延生长Ge0.975Sn0.025合金薄膜

使用低、高温两步法生长的高质量Ge薄膜作为缓冲层,在Si(001)衬底上采用分子束外延法生长出Ge_0.975Sn_0.025合金薄膜.X射线双晶衍射和卢瑟福背散射谱等测试结果表明,Ge_0.975Sn_0.025合金薄膜具有很好的晶体质量,并且没有发生Sn表面分凝.另外,Ge_0.975Sn_0.025合金薄膜在500 ℃下具有很好的热稳定性,有望在Si基光电器件中得到应用. 关键词： GeSn Ge 分子束外延 外延生长