Determination of five sesquiterpenoids in Xingnaojing injection by quantitative analysis of multiple components with a single marker

A quantitative analysis of multiple components with a single‐marker method was established for the simultaneous determination of five sesqutiterpenoids in Xingnaojing injection. This method was established with Xingnaojing injection determined by high‐performance liquid chromatography coupled with diode array detection. The durability and system suitability of the established method were evaluated, and the reliable relative correction factors were obtained with curdione selected as an internal reference. The contents of the five components in all Xingnaojing injections were determined by external standard method and the contents of curcumenone, curcumenol, curzerenone, and germacrone were also calculated with the obtained relative correction factors. Then, relative error was investigated to estimate the difference of the two methods. As a result, the established new method possesses good adaptability, and there is no significant difference between the two methods, except for the content of curzerenone in eight samples. To put the established method into practice, the limits of quantitation of the established method of the five components were proposed and defined. Thus, the developed methodology can also be utilized to the quality evaluation of Xingnaojing injection, in spite of the difference found in the content of curzerenone between the external standard method and the newly established method.     

Iron(III)‐Selective Chelation‐Enhanced Fluorescence Sensing for In Vivo Imaging Applications

A “turn‐on” pattern Fe³⁺‐selective fluorescent sensor was synthesized and characterized that showed high fluorescence discrimination of Fe³⁺ over Fe²⁺ and other tested ions. With a 62‐fold fluorescence enhancement towards Fe³⁺, the probe was employed to detect Fe³⁺ in vivo in HeLa cells and Caenorhabditis elegans, and it was also successfully used to elucidate Fe³⁺ enrichment and exchange infected by innexin3 (Inx3) in hemichannel‐closed Sf9 cells.     

Fabrication of Fluoropolymer Microtubes via RAFT Copolymerization of N,N′‐Methylene Bisacrylamide Gel Fibers and Fluoromonomer

Fluoropolymer microtubes with a smooth surface were fabricated in more than 70 % yield via reversible addition fragmentation chain transfer (RAFT) co‐polymerization of N,N′‐methylene bisacrylamide (MBA) gel fibers as both template and monomer, 2‐(perfluoro‐3‐methylbutyl)ethyl acrylate (R‐3420) as co‐monomer, and pentaerythritol tetraacrylate (PET4A) as cross‐linker. The resulting fluoropolymer microtubes were characterized fully by SEM, TEM, EDS, XPS, and FT‐IR. The influence of the monomer composition on the yields and morphologies of the tubes were investigated in detail. The results indicated that polymer microtubes with a smooth surface were obtained at suitable amounts of R‐3420 and PET4A. Because of the decreased solubility of MBA gel fibers, the wall thickness increased as more R‐3420 was used. In the presence of PET4A, the solution polymerization could be facilitated and more R‐3420 could be attached onto the tubes based on FT‐IR analysis. The water contact angle and swelling ratio measurements both revealed the low hydrophilicity and high lipophilicity of the fluoropolymer microtubes, which made the sample able to absorb toluene selectively in a water/toluene two‐phase system.     

Altering the Position of Phenyl Substitution to Adjust Film Morphology and Memory Device Performance

In this study, two structural isomers α‐PBT and β‐PBT, which only differ in the phenyl substituent position on the quinoline chromophore, have been designed and successfully synthesized. The influences of substituent position on the film morphology and the storage performance of the devices were investigated. Both molecules employed in the memory devices exhibited same nonvolatile binary (write‐once‐read‐many‐times; WORM) characteristics, but the switch threshold voltage (Vth) of the β‐PBT‐based device was clearly lower than that of the α‐PBT‐based device. Simulation results demonstrate that the variation of the phenyl substituent position led to different intermolecular stacking styles and thus to varied grain sizes for each film morphology. This work illustrates that altering the phenyl substituent position on the molecular backbone could improve the quality of the film morphology and reduce power consumption, which is good for the rational design of future advanced organic memory devices (OMDs).     

Ferrocenylethynyl‐Terminated Azobenzenes: Synthesis,Electrochemical, and Photoisomerization Studies

Ferrocenylethynyl‐terminated derivatives 8 – 12 have been synthesized and characterized by electrochemistry and UV/Vis spectroscopy. The electrochemical and photophysical studies indicate that the electronic communication in ferrocenylethynyl‐substituted derivatives is strongly influenced by the substituted position of the ferrocenylethynyl moiety. In situ electrochemical oxidation or chemical oxidation caused a characteristically weak ligand‐to‐metal charge‐transfer (LMCT) band to appear at 700–1000 nm. Subsequent electrochemical reduction or chemical reduction recovered the most of the original curve and the color of the solution as well. Among the derivatives, compound 8 exhibits the highest cis/trans molar ratio (64:36) in the photostationary state (PSS) upon light irradiation at 365 nm. Compound 8 exhibits excellent fatigue resistance and reversibility under several repeated reversible isomerization cycles.     

Pt nanohelices with highly ordered horizontal pore channels as enhanced photothermal materials

Recent studies have further demonstrated that the conjugation of noble metal helical nanostructures could alter their optical and catalytic activities. However, the intrinsic isotropic crystal growth of Pt makes the synthesis of high-quality Pt NCs with unique porous or branched nanostructures difficult. In this work, a new, powerful capping agent, N,N-dimethyloctadecylammonium bromide acetate sodium, was synthesized and used to coordinate Pt ions, slowing down the reaction rate. As a result, in aqueous solution, Pt nanohelices with highly ordered horizontal pore channels were successfully fabricated. Importantly, the Pt nanohelices were composed of several sub-2 nm Pt nanowires coiled together around a central point. The as-obtained samples exhibited enhanced photothermal properties compared with the classic Pt nanoparticles.     

Monodispersed AuPd nanoalloy: composition control synthesis and catalytic properties in the oxidative dehydrogenative coupling of aniline

A series of AuPd@C nanoalloy catalysts with tunable compositions were successfully prepared by a co-reduction method. The use of borane-tert-butylamine complex as reductant and oleylamine as both solvent and reductant was very effective for the preparation of the monodispersed nanoalloy. We evaluated the catalytic activity of these AuPd@C nanoalloys for oxidative dehydrogenative coupling of aniline, which showed better catalytic activity than equal amounts of sole Au@C or Pd@C catalyst. The Au₁Pd₃@C catalyst exhibited the best performance, indicating that the conversion and selectivity were improved along with the increase of Pd composition. However if the Pd composition was too high in the AuPd alloy, Au₁Pd₇@C achieved only 81% conversion in this reaction.