一种“类耗散系统”中的“类Ⅴ型阵发”

一类不连续不可逆保面积映象可以展示类似耗散的行为,因此可称其为“类耗散系统”.在一种类耗散系统中观察到了椭圆周期轨道及其周围的椭圆岛与映象不连续边界碰撞而消失的现象.周期轨道消失后,经过一系列过渡椭圆周期轨道之后,系统的行为由一个混沌类吸引子主导.在混沌类吸引子刚刚出现时,混沌时间序列呈现层流相与湍流相的无规交替.这一切都与不连续耗散系统中发生的Ⅴ型阵发的相应性质十分相似,因此可称为“类Ⅴ型阵发”.然而,当混沌类吸引子刚刚出现时,仅可以找到最后一个过渡椭圆岛的“遗迹”,并不存在它的“鬼魂”,因此类Ⅴ型阵发不遵从Ⅴ型阵发的特征标度规律.反之,混沌类吸引子的鬼魂却存在于最后一个过渡椭圆周期轨道的类瞬态过程中,因此在类Ⅴ型阵发导致混沌运动的临界点之前,由此“类瞬态混沌奇异集”中逃逸的规律就成为标志这一种临界现象的标度律.这与Ⅴ型阵发又根本不同. 关键词： 类耗散性 类混沌吸引子 类Ⅴ型阵发     

钙钛矿结构中的简谐子软模

利用复合空间型方法,在自由边界条件下解出了钙钛矿结构有限尺寸晶体的简谐振动方程.计算结果给出了收敛的简谐子谱分布,并发现了许多简谐子软模.用这些软模花样说明了钛酸钡晶体冷却时发生具有a畴和c畴结构的铁电相变.理论表明铁电相变过程涉及屏蔽电荷的激发及其在界面的缓慢扩散,以最后得出各个电畴内部的均匀自发极化 关键词： 晶格动力学 简谐子 软模 钛酸钡     

OPCOT在Ru(0001)表面上的紫外光电子能谱研究

采用紫外光电子能谱,研究了新型有机发光材料八芳基环辛四烯(OPCOT)在金属Ru(0001)表面上的电子结构,以及它们之间的相互作用.位于费米能级以下43,69,93和114eV处的4个谱峰分别来自于OPCOT材料中苯环的πCC,σCC,σCH和σHH轨道,位于30eV处的谱峰反映了8个苯环聚合后具有π轨道特性的C—C键.OPCOT材料的价带顶位于费米能级以下25eV处,OPCOT材料在Ru(0001)表面上的功函数为395eV.150℃以下,OPCOT材料可以在Ru(0001)表面稳定存在.随温度的升高,OPCOT材料主要以脱附的形式减少 关键词： 八芳基环辛四烯 光电子能谱 价电子结构 脱附     

软X射线条纹相机用于激光等离子体辐射温度的测量方法

本文提出了软X射线条纹相机与吸收膜相耦合测量等离子体温度的实验原理与方法,编制了数值计算程序SCC,给出了平面金靶在1.06μm激光(LF—II~=激光装置)作用下,靶面功率密度约10~(14)W/cm~2的辐射温度。并对温度处理中存在的误差,以及把此方法推广到能谱的时间分辨和温度的空间分辨测量中的可能性进行了讨论。     

Influence of the structure parameters on the gain and noise figure in silicon parametric amplifiers based on SOI Rib waveguides

Gain and Noise figure (NF) characteristics in dual-pump parametric amplifier based on silicon on insulator (SOI) Rib waveguides are numerically investigated in the presence of nonlinear losses. The impact of structure parameters of the silicon optical parametric amplifiers (SOPAs) on the gain and the NF are also analyzed. The results show that both the height and the width of the silicon on insulator (SOI) can affect the gain and the NF of SOPAs. 354 nm bandwidth (3 dB) and 8.135 maximum gain can be achieved by tailoring the structure parameters of the SOI rib waveguides. Moreover, the dispersion and the effective mode area of SOI are also analyzed.     

Spreading of apertured partially coherent beams in turbulent media

The closed-form expression for the mean-squared width of apertured partially coherent beams propagating through turbulent media is derived by using the integral transform technique. The influence of turbulence on the spreading of apertured partially coherent beams is studied quantitatively by examining the relative mean-squared width, which is defined as the ratio of the mean-squared width of an apertured partially coherent beam in turbulence to the mean-squared width of the same beam in free space. On the other hand, the range of turbulence-independent propagation, also a reasonable measure of the resistance of a beam to turbulence, is obtained by examining the mean-squared width. It is shown that the spreading of apertured partially coherent beams is less affected by turbulence with smaller truncation parameter δ and coherence parameter α than with larger δ and α. In addition, the influence of turbulence on the spreading of apertured partially coherent beams increases first and then decreases due to increasing waist width w₀. The results obtained are explained physically.     

A novel acoustic emission beamforming method with two uniform linear arrays on plate-like structures

A novel acoustic emission (AE) source localization approach based on beamforming with two uniform linear arrays is proposed, which can localize acoustic sources without accurate velocity, and is particularly suited for plate-like structures. Two uniform line arrays are distributed in the x-axis direction and y-axis direction. The accurate x and y coordinates of AE source are determined by the two arrays respectively. To verify the location accuracy and effectiveness of the proposed approach, the simulation of AE wave propagation in a steel plate based on the finite element method and the pencil-lead-broken experiment are conducted, and the AE signals obtained from the simulations and experiments are analyzed using the proposed method. Moreover, to study the ability of the proposed method more comprehensive, a plate of carbon fiber reinforced plastics is taken for the pencil-lead-broken test, and the AE source localization is also realized. The results indicate that the two uniform linear arrays can localize different sources accurately in two directions even though the localizing velocity is deviated from the real velocity, which demonstrates the effectiveness of the proposed method in AE source localization for plate-like structures.     

Non-Gaussian water diffusion kurtosis imaging of prostate cancer

Purpose

To evaluate the non-Gaussian water diffusion properties of prostate cancer (PCa) and determine the diagnostic performance of diffusion kurtosis (DK) imaging for distinguishing PCa from benign tissues within the peripheral zone (PZ), and assessing tumor lesions with different Gleason scores.

Materials and Methods

Nineteen patients who underwent diffusion weighted (DW) magnetic resonance imaging using multiple b-values and were pathologically confirmed with PCa were enrolled in this study. Apparent diffusion coefficient (ADC) was derived using a monoexponential model, while diffusion coefficient (D) and kurtosis (K) were determined using a DK model. Differences between the ADC, D and K values of benign PZ and PCa, as well as those of tumor lesions with Gleason scores of 6, 7 and ≥ 8 were assessed. Correlations between parameters D and K in PCa were analyzed using Pearson’s correlation coefficient. ADC, D and K values were correlated with Gleason scores of 6, 7 and ≥ 8, respectively.

Results

ADC and D values were significantly (p < 0.001) lower in PCa (0.79 ± 0.14 μm²/ms and 1.56 ± 0.23 μm²/ms, respectively) compared to benign PZ (1.23 ± 0.19 μm²/ms and 2.54 ± 0.24 μm²/ms, respectively). K values were significantly (p < 0.001) greater in PCa (0.96 ± 0.20) compared to benign PZ (0.59 ± 0.08). D and K showed fewer overlapping values between benign PZ and PCa compared to ADC. There was a strong negative correlation between D and K values in PCa (Pearson correlation coefficient r = − 0.729; p < 0.001). ADC and K values differed significantly in tumor lesions with Gleason scores of 6, 7 and ≥ 8 (p < 0.001 and p = 0.001, respectively), although no significant difference was detected for D values (p = 0.325). Significant correlations were found between the ADC value and Gleason score (r = − 0.828; p < 0.001), as well as the K value and Gleason score (r = 0.729; p < 0.001).

Conclusion

DK model may add value in PCa detection and diagnosis. K potentially offers a new metric for assessment of PCa.     

Improved l1-SPIRiT using 3D walsh transform-based sparsity basis

l1-SPIRiT is a fast magnetic resonance imaging (MRI) method which combines parallel imaging (PI) with compressed sensing (CS) by performing a joint l1-norm and l2-norm optimization procedure. The original l1-SPIRiT method uses two-dimensional (2D) Wavelet transform to exploit the intra-coil data redundancies and a joint sparsity model to exploit the inter-coil data redundancies. In this work, we propose to stack all the coil images into a three-dimensional (3D) matrix, and then a novel 3D Walsh transform-based sparsity basis is applied to simultaneously reduce the intra-coil and inter-coil data redundancies. Both the 2D Wavelet transform-based and the proposed 3D Walsh transform-based sparsity bases were investigated in the l1-SPIRiT method. The experimental results show that the proposed 3D Walsh transform-based l1-SPIRiT method outperformed the original l1-SPIRiT in terms of image quality and computational efficiency.     

激光冲击强化“残余应力洞”的形成机制

利用ABAQUS有限元软件进行了单个圆形高斯光斑的激光冲击强化数值模拟,分析材料表面光斑中心区域形成的"残余应力洞"现象,并通过分析材料的动态力学响应特征揭示了"残余应力洞"的形成机制。结果表明:在冲击波加载时,光斑边界处会产生很强的剪切应力,形成向四周传播的表面稀疏波和向材料内部传播的剪切波。当稀疏波同时传播到光斑中心,发生相遇、汇聚,使材料产生急剧的上下位移过程,造成冲击波加载塑性变形后的二次塑性变形。二次塑性变形中形成了较大的剪切塑性应变,并降低了冲击波加载阶段产生的轴向和径向塑性应变,使残余压应力降低,从而形成"残余应力洞"。