Existence of Solutions for a Quasilinear Schrödinger Equation with Potential Vanishing

Acta Mathematicae Applicatae Sinica, English Series - We study the following quasilinear Schrödinger equation $$ - \Delta u + V(x)u - \Delta ({u^2})u = K(x)g(u),\,\,\,\,\,\,\,\,x \in...     

State-Independent Geometric Quantum Gates via Nonadiabatic and Noncyclic Evolution

Geometric phases are robust to local noises and the nonadiabatic ones can reduce the evolution time, thus nonadiabatic geometric gates have strong robustness and can approach high fidelity. However, the advantage of geometric phase has not been fully explored in previous investigations. Here,a scheme is proposed for universal quantum gates with pure nonadiabatic and noncyclic geometric phases from smooth evolution paths. In the scheme, only geometric phase can be accumulated in a fast way, and thus it not only fully utilizes the local noise resistant property of geometric phase but also reduces the difficulty in experimental realization. Numerical results show that the implemented geometric gates have stronger robustness than dynamical gates and the geometric scheme with cyclic path. Furthermore, it proposes to construct universal quantum gate on superconducting circuits, with the fidelities of single-qubit gate and nontrivial two-qubit gate can achieve 99.97% and 99.87%, respectively. Therefore, these high-fidelity quantum gates are promising for large-scale fault-tolerant quantum computation.     

线型聚能装药的理论研究

本文提出了一端起爆的线型聚能装药射流形成的不定常理论模型。根据这一模型,当金属罩在爆轰波作用下的运动速度为已知时,则不论此速度是否是时间或初始位置的函数,都能得到射流形成时的速度,质量和位置等参数。 按照本文模型,Defourneaux.M.的定常射流形成定常模型是一个简单的特例。我们利用本文的模型对等厚度装药的情况进行了计算,并与实验结果比较,两者符合良好。同时计算结果表明,考虑射流形成的不定常因素,可以较好地解释射流头部的质量堆积和射流内部的反向速度梯度等实验现象。本文的模型可以为线型聚能切割索的设计提供较为准确的理论指导。     

超音速气动雾化制粉机理的实验研究及分析

本文根据雾化模拟实验,提出了初次雾化模型。并利用已有超音速气动知识,对这一模型进行了定性的解释和定量的描述,给出粒度分布和冷却速率的解析表达式,对雾化工艺参数的选择有一定的指导意义。     

迎风通量差分分裂法对边界层特性的数值模拟

迎风通量差分分裂法作为一种高效率的数值方法,已被广泛地用于模拟各种复杂流场,但用这类方法模拟有边界层存在的超音速粘性流场时,必须保证通量差分分裂为守恒的;否则,将在边界层内引入一个可观的虚假人工扩散项和压力梯度项,歪曲了边界层特性。本文就这个问题进行理论和数值的研究。     

变深度螺旋槽止推轴承的边界元法计算

本文以分析变深度螺旋槽止推轴承为例介绍了边界元法在润滑力学研究领域中的应用,以及相应的边界条件的处理方法,同时还讨论了轴承的尺寸参数对其性能参数的影响。     

（Ca,Mg）—Sialon陶瓷在空气及水润滑条件下的磨损机理研究

利用ＳＲＶ球－盘磨损试验机考察了一种（Ｃａ，Ｍｇ）－Ｓｉａｌｏｎ陶瓷在空气及水中的摩擦学性能，并采用ＥＰＭＡ，ＳＥＭ，ＥＤＡＸ以及ＸＰＳ等分析手段对其磨损机理做了进一步研究。结果表明：（Ｃａ，Ｍｇ）－Ｓｉａｌｏｎ陶瓷在水中比在空气中具有更低的摩擦因数，但具有较高的磨损体积损失。     

An efficient algorithm for hypersonic viscous flows

The CSCM-S algorithm proposed by Lombard et al. is a very attractive tool for solving multidimensional Euler and Navier-Stokes equations. However, it is not economical due to the use of global sweeps in the whole computational domain. In this paper we suggest a modified strategy, which combines a single-marching technique for supersonic dominated region with a multi-sweep procedure for pure subsonic and complex flowfield. The new algorithm may save significantly CPU time and is more suitable for engineering applications. The project supported by National Natural Science Foundation of China     

Mode III fracture analysis by Trefftz boundary element method

This paper presents a hybrid Trefftz (HT) boundary element method (BEM) by using two indirect techniques for mode III fracture problems. Two Trefftz complete functions of Laplace equation for normal elements and a special purpose Trefftz function for crack elements are proposed in deriving the Galerkin and the collocation techniques of HT BEM. Then two auxiliary functions are introduced to improve the accuracy of the displacement field near the crack tips, and stress intensity factor (SIF) is evaluated by local crack elements as well. Furthermore, numerical examples are given, including comparisons of the present results with the analytical solution and the other numerical methods, to demonstrate the efficiency for different boundary conditions and to illustrate the convergence influenced by several parameters. It shows that HT BEM by using the Galerkin and the collocation techniques is effective for mode III fracture problems. The project supported by the National Natural Science Foundation of China(10472082). The English text was polished by Keren Wang.     

多孔介质中收聚圆锥冲击波的相互作用的实验研究

我们从实验上研究了铝粉、铁粉和钨粉中收聚圆锥冲击波的相互作用,并导出了利用实验数据计算此波锥顶角的公式。