微乳液在中药黄酮类成分薄层色谱分析中的应用

微乳液为表面活性剂、助表面活性剂、油、水等组分在适当配比下自发生成的无色透明、各相同性、低粘度的热力学稳定体系,与有机溶剂相似而有增溶作用。康纯等首次将微乳液应用到了薄层色谱技术中。本文以微乳液为流动相,聚酰胺薄膜为固定相,对几种典型的含黄酮类成分的中药材中的黄酮类成分进行了分离。与传统的方法相比,该法分离效率和检测灵敏度高,重现性好,毒性小且价格低廉。     

2A12-T6铝合金表面双-(γ-三乙氧基硅丙基)四硫化物薄膜的特性

采用傅立叶变换红外光谱分析了2A12-T6铝合金表面自组装双-(!-三乙氧基硅丙基)四硫化物硅烷偶联剂(SCA)薄膜结构特征,并采用电化学极化曲线评价了薄膜的耐蚀性能.结果表明,铝材表面自然晾干,SCA薄膜分子之间主要通过氢键连接,腐蚀电流密度减小1个数量级以上.120℃的加热处理促进铝板表面通过SiOSi链接而形成SCA网状薄膜结构,并通过在界面上形成SiOAl界面相结构而与铝板表面牢固连接,腐蚀电流密度降低2个数量级以上.SCA乙醇溶液浸泡处理10min比浸泡2s～1min的铝板表面SCA薄膜内氢键缔合羟基要多.     

室温制备高合金化Pt-Ru/CMK-3催化剂及其对甲醇的电催化氧化

通过低温络合反应制备了高分散高合金化的Pt-Ru固溶体, 并将其均匀地担载在有序介孔碳CMK-3上, 以形成二元复合金属催化剂. XRD谱图表明,fcc结构的Pt原子部分被hcp结构的Ru原子取代形成置换固溶体， 而且几乎没有未形成合金的Ru存在. TEM和XRD研究结果表明， Pt-Ru/CMK-3催化剂中Pt-Ru合金粒子的平均粒径为27 nm, 且具有良好的均一度. 还研究了催化剂对甲醇的电催化氧化性能, 并与E-TEK公司同类催化剂进行了对比, 研究结果表明, Pt-Ru/CMK-3催化剂具有较大的电化学活性面积, 对甲醇的电催化氧化性能和抗CO中毒能力明显优于其它同类催化剂.     

酚醛型氰酸酯与双酚A型环氧共固化反应的FTIR研究

在恒温固化条件下,通过FTIR跟踪方法,研究了酚醛型氰酸酯与双酚A型环氧共固化反应的路径及其反应机理.共固化体系的反应过程包括在150℃及其以下温度,主要发生的是氰酸酯的三嗪环化固化反应,其中三嗪环化固化反应由于环氧的加入,反应速率被极大地提高了;同时,酚醛型氰酸酯中的氨基甲酸酯类杂质与环氧发生开环聚合反应,引起环氧官能团产生弱而持续的消耗.但在此阶段,酚醛型氰酸酯与环氧之间没有化学反应发生;在180℃及其以上温度,三嗪环和环氧发生反应,异构为异氰脲酸环结构,并进一步反应生成唑啉酮环结构,由于该反应的发生,促进了环氧官能团的消耗速度,在环氧官能团的转化率-时间图中,出现倒S曲线;在三嗪环的转化率图中,出现一个极大值后再降落的曲线.反应温度的提高有利于促进酚醛型氰酸酯与环氧之间的共固化反应,特别是当反应温度为220℃时,氰酸酯官能团和环氧官能团的消耗、三嗪环和唑啉酮环的生成均以较快的速率进行,—OCN生成三嗪环的转化率可以较容易地达到1,而唑啉酮环的转化率不超过0.5.     

多金属氧酸盐/介孔分子筛杂化材料的制备与表征

采用嵌段共聚物模板P123和缺位Keggin结构的多金属氧酸盐K₈SiW₁₁O₃₉•12H₂O, 由溶胶-凝胶法合成了具有类六方结构的SiW₁₁/SBA-15杂化介孔分子筛材料, 并通过X射线衍射(XRD)、傅立叶变换红外光谱(FT-IR)、紫外漫反射光谱(UV/DRS)、电感耦合等离子原子发射光谱(ICP-AES)、低温N₂吸附、透射电子显微镜(TEM)等手段对其进行了表征. 结果表明, 杂化材料中不仅规整均一的类六方介孔结构得以保持, 而且多金属氧酸盐的Keggin单元保留完整(含量达25%左右), 并共价键联于介孔材料的孔道内部. 稳定性实验表明, 杂化材料中多金属氧酸盐在水中的流失率远低于一般浸渍法制备的样品.     

共振光散射法研究脱氧核糖核酸与多胺的相互作用及精胺的测定

在一定条件下,精胺不仅能够与脱氧核糖核酸(DNA)大沟嵌入结合,还能与DNA链上的碱基和磷酸基进行链内结合和跨链结合,形成致密的环状螺旋结构,造成DNA的凝聚,从而使DNA共振光散射(RLS)强度强烈地增强。增强的共振光散射强度与精胺的浓度呈现良好的线性关系,线性范围为5.0×10-7~1.0×10-5mol/L;校正曲线的回归方程为IRLS=40.22 5.28×107C(mol/L),相关系数r=0.9936;检出限(3σ)为7.4×10-8mol/L。在测定精胺的线性范围内,其它多胺(亚精胺,腐胺)、蛋白质及常见的金属离子不干扰测定。该方法用于测定新几内亚凤仙中的精胺,获得满意结果。     

碳纳米管基复合材料研究进展

碳纳米管基复合材料具有优良的性能,已在化学、化工、材料、生物、医学等领域受到广泛关注.本文主要综述了功能材料包覆碳纳米管的制备方法及其力学、磁学、光学、电化学等性质,以及当前研究的焦点和存在的问题.     

Catalytic reduction of NO to N2O by a designed heme copper center in myoglobin: implications for the role of metal ions

The effects of metal ions on the reduction of nitric oxide (NO) with a designed heme copper center in myoglobin (F43H/L29H sperm whale Mb, CuBMb) were investigated under reducing anaerobic conditions using UV-vis and EPR spectroscopic techniques as well as GC/MS. In the presence of Cu(I), catalytic reduction of NO to N2O by CuBMb was observed with turnover number of 2 mol NO.mol CuBMb-1.min-1, close to 3 mol NO.mol enzyme-1.min-1 reported for the ba3 oxidases from T. thermophilus. Formation of a His-heme-NO species was detected by UV-vis and EPR spectroscopy. In comparison to the EPR spectra of ferrous-CuBMb-NO in the absence of metal ions, the EPR spectra of ferrous-CuBMb-NO in the presence of Cu(I) showed less-resolved hyperfine splitting from the proximal histidine, probably due to weakening of the proximal His-heme bond. In the presence of Zn(II), formation of a five-coordinate ferrous-CuBMb-NO species, resulting from cleavage of the proximal heme Fe-His bond, was shown by UV-vis and EPR spectroscopic studies. The reduction of NO to N2O was not observed in the presence of Zn(II). Control experiments using wild-type myoglobin indicated no reduction of NO in the presence of either Cu(I) or Zn(II). These results suggest that both the identity and the oxidation state of the metal ion in the CuB center are important for NO reduction. A redox-active metal ion is required to deliver electrons, and a higher oxidation state is preferred to weaken the heme iron-proximal histidine toward a five-coordinate key intermediate in NO reduction.     

Si(001)-(2×2×1):H表面O2吸附的密度泛函理论研究

A novel model was developed to theoretically evaluate the O2 adsorption on H-terminated Si(001)-(2*2*1) surface. The periodic boundary condition, the ultrasoft pseudopotentials technique based on density functional theory (DFT) with generalized gradient approximation (GGA) functional were applied in our ab initio calculations. By analyzing bonding energy on site, the favourable adsorption site was determined. The calculations also predicted that the adsorption products should be Si=O and H2O. This theoretical study supported the reaction mechanism provided by Kovalev et al. The results were also a base for further investigation of some more complex systems such as the oxidation on porous silicon surface.     

Redox Communication within Multinuclear Iron–Sulfur Complexes Related to Electronic Interplay in the Active Site of [FeFe]Hydrogenase

The one‐electron oxidations of a Fe₂ complex lead to the formation of a persistent metal‐stabilized thiyl radical Fe₂ species, mixed‐valent Fe₄, and Fe₈ complexes. The unpaired spin in the Fe₂ radical species delocalizes over the Fe₂ and the aromatic dithiolate, mostly on the terminal sulfur. The subsequent dimerization of the singly oxidized Fe₂ to the Fe₄ retains the partial thiyl radical character. For an analogue with less steric hindrance, the π–π stacking interaction between the dithiolato aromatic rings induces generation of the Fe₈, in which process electronic structures of the species are modulated through reducing the thiyl radical to the thiolate. Electronic reorganization repeats when the Fe₈ is converted to Fe₄. Electronic interplay in the complexes decreases the energy gap of frontier MOs and buffers electronic impacts upon redox events. Easier accessible redox potentials and increased stability of the species are facilitated. The results demonstrate that electronic versatility of the benzenedithiolate exerts pronounced influences on electronic and coordination structure of the metal complexes.