Solvothermal Synthesis of Molybdenum Disulfide Hollow Spheres Modified by Cyanex 301 in Water–Ethanol Medium

Hollow spherical molybdenum disulfide has been successfully synthesized via a solvothermal method using Cyanex 301 as sulfur source and modification agent. The hollow spheres are characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction and Energy-Dispersive X-ray analysis. The influences of reaction conditions are also discussed while a mechanism is proposed to explain the formation of the peculiar morphology.     

Photoluminescence properties of the composite of porous alumina and poly (2,5-dibutoxy-1,4 phenylenevinylene)

The spin coating method was used to assemble polymer (Poly (2,5-dibutoxy-1,4-phenylenevinylene)) (DBO-PPV) into the pores of porous alumina which was prepared by anodization. Four peaks in the photoluminescence (PL) spectra of the composite, with contributions from the DBO-PPV and porous alumina, were found. It was also found that the light emitting from the porous alumina could excite the photoluminescence of DBO-PPV. The nanometer effect of the porous alumina can lead to a blue shift of 90 nm of the PL peaks of DBO-PPV.     

2,2’—二硫代双(4,6—二叔丁基苯酚)的晶体和分子结构

一种塑解剂经高压液体色谱分离制备出主要成份2,2′—二硫代双(4,6二叔丁基苯酚)。由质谱分析得到分子量为474化学式为C_(28)H_(2)O_2S_2、晶体呈现孪生。基体单晶属三斜晶系,空间群为(?)PI(NO.2),晶体结构用直接法解出,=0.07。研究结果表明该分子是二硫代酚类化合物。在EI场中,S—S键断裂是主要断裂过程。晶体中,分子的一个环上的羟基是无序分布的。羟基与最邻近的硫原子形成氢键。     

Nanoparticle composites: FePt with wide-band-gap semiconductor

We present a simple way to synthesize FePt and ZnO (wide-band-gap semiconductor) nanoparticle composites. The FePt nanoparticles were fabricated using the method reported by Sun et al. By controlling the heating rate, 3 nm FePt nanoparticles were synthesized. Well-dispersed FePt and ZnO nanoparticle composites were prepared by further adding zinc acetate and oleyl amine into the 3 nm FePt nanoparticle dispersion. By controlling the molar ratio of the FePt and zinc acetate, FePt and ZnO nanoparticle composites with different FePt particle fractions were obtained. The intensity of photo luminescence spectra of the nanoparticle composites increases very much with decreasing FePt particle fraction, whereas the peak position shifts a little. After annealing at 550 °C for half an hour, the nanoparticle composites become magnetically hard or semi-hard with coercivity much dependent on the FePt particle volume fraction. The coercivity of the composites increases with annealing temperature. The composites hold the promise of applications in new generation recording and/or optical devices.     

一类非定常对流占优扩散问题差分-流线扩散法的后处理

讨论了一类非定常对流占优扩散方程的差分-流线扩散格式(FDSD),利用插值后处理技术,提高了特殊网格下该FDSD格式在双线性元空间的精度,从而按L∞(L2(Ω) 模达到最优．     

A Note on the Kissing Numbers of Superballs

The lower bounds for the translative kissing numbers of superballs are studied in this note. We improve the bound given by Larman and Zong. Furthermore, we give a constructive bound based on algebraic-geometry codes that also improves the bound by Larman and Zong in almost all cases.     

On the persistence of elliptic lower-dimensional tori in Hamiltonian systems under the first Melnikov condition and Rüssmann’s non-degeneracy condition

In this paper we formulate a theorem on the persistence of elliptic lower-dimensional invariant tori for nearly integrable analytic Hamiltonian systems under the first Melnikov condition and Rüssmann’s non-degeneracy condition, and give the measure estimates of parameters for the non-resonance conditions under Rüssmann’s non-degeneracy condition, which is essential for the proof of our result.     

Solvothermal synthesis of TiO2: anatase nanocrystals and rutile nanofibres from TiCl4 in acetone

This work reports a new synthetic approach for single‐phase TiO₂ nanomaterials by solvothermal treatment of titanium tetrachloride in acetone at 80–110 °C. Small, uniform, and yet size‐tunable (5–10 nm) anatase titania nanocrystallites were obtained using a low concentration of TiCl₄ in acetone (i.e., at molar ratios of TiCl₄/acetone ≤ 1:15) in the temperature range of 80–110 °C, while rutile nanofibers were synthesized using a high concentration of TiCl₄ (e.g., TiCl₄/acetone = 1:10) at 110 °C. Copyright © 2007 John Wiley & Sons, Ltd.     

Bending-torsion vibration of a partially submerged cylinder with an arbitrary cross-section

An analytical method is presented to investigate the bending-torsion vibration characteristics of a cylinder with an arbitrary cross-section and partially submerged in water. The compressibility and the free surface waves of the water are considered simultaneously in the analysis. The exact solution of structure–water interaction is obtained mathematically. Firstly, the analytical expression of the velocity potential of the water is derived by using the method of separation of variables. The unknown coefficients in the velocity potential are determined by the longitudinal and circumferential Fourier expansions along the outer surface of the cylinder and are expressed in the form of integral equations including the unknown dynamic bending deflection and torsional angle of the cylinder. Secondly, the force and torque acting on the cylinder per unit length, provided by the water, are obtained by integrating the water dynamic pressure along the circumference of the cylinder. The general solution of bending-torsion vibration of the cylinder under the water dynamic pressure is derived analytically. The integral equations included in the velocity potential of the water can be solved exactly. Finally, the eigenfrequency equation of cylinder–water interaction is obtained by means of the boundary conditions of the cylinder. Some numerical examples for elliptical columns partially submerged in water are provided to show the application of the present method.