Studies on fluorescent species of spiro-indolinonaphthooxazines and their fluorescence spectra

Photophysical behavior of spiro[1,3,3-trimethylindolino-2,3′-naphtho[2,1-b]-1,4-oxazine] (SP1) and spiro[1,3,3,2′-tetramethylindolino-2,3′-naphtho[2,1-b]-1,4-oxazine] (SP2) were studied. The fluorescent species and their spectra of SP1 and SP2 in polar solvents (acetonitrile and methanol) and non-polar solvent (cyclohexane) were investigated. The fluorescence decay in polar solvents was studied by picosecond time-correlated single photon counting. In most cases, fluorescence decay obeyed triexponential decay kinetics. The major fluorescent species is an excited intermediate which has similar conformation as its precursor (¹ SP ^*) formed after the bond cleavage between spirocarbon and oxygen in oxazine ring. The effects of molecular structure and solvent polarity on fluorescence spectra and fluorescence decay lifetime were studied.     

氮杂冠醚研究Ⅶ、双仲胺型氮杂冠醚对过渡金属离子的选择性萃取作用

合成了五种新型双仲胺型氦杂冠醚，研究了它们对过渡金属离子进行液—液萃取，并用原子吸收法测定其浓度。实验结果表明：这类冠醚对Ａｇ￣＋、Ｐｄ￣（２＋）、和Ｐｔ￣（４＋）等贵金属离子有较强的选择配位性能，对选择性分离这些金属离子有重要的意义。     

A novel chemical route to SiO2 nanowires

A white substance was got by directly heating TiSi powder on Ti foil, under Ar+O ₂ atmosphere. ED, EDX, SEM and HRTEM studies reveal that the white substance consists of amorphous SiO ₂ nanowires of smooth surface and uniform diameter (40-90 nm). X-ray-induced luminescent emission experiment shows that two broad peaks are at 430 and 570 nm. A one-dimensional growth mechanism, on the basis of the one-dimensional thermal flow during nanowire formation, is discussed.     

Excess enthalpies of ethylbenzene + alkane systems at 25°C. An interpretation in terms of the Prigogine-Flory-Patterson model

The molar excess enthalpies for the ethylbenzene + n-decane and ethylbenzene + n-tetradecane systems have been measured at 25°C over the complete concentration range. These results and others from the literature for alkanes + ethylbenzene, and alkanes + toluene have been discussed in terms of the Prigogine-Flory-Patterson theory.     

聚丙烯与SBS嵌段共聚物共混时的结晶行为

用偏光显微镜,小角光散射,动态力学测量和DSC等方法研究了聚丙烯和SBS共混物的结晶行为。结果表明,SBS的混入可以降低聚丙烯的结晶程度和阻碍球晶的形成,因而有利于提高聚丙烯塑料的抗冲击性能。从DSC实验也看到共混物中的聚丙烯具有较高的结晶速率。     

New [Mo(eta3-allyl)(CO)2L3]+ complexes with monodentate or tridentate nitrogen-donor ligands

Cationic complexes [Mo(eta(3)-allyl)(CO)2L3]+ (L3 = either nitrogen-donor tridentate ligand or three monodentate ligands) were prepared in high yield and under mild conditions using as precursors either the triflato complex [Mo(eta(3)-allyl)(OTf)(CO)2(NCMe)2] or the combination of the chloro complex [Mo(eta(3)-allyl)Cl(CO)2(NCMe)2] and the salt NaBAr'(4)(Ar'= 3,5-bis(trifluoromethyl)phenyl). The tridentate ligands employed were 2,2':6',2'-terpyridine (terpy) and cis,cis-1,3,5-cyclohexanetriamine (CHTA), whereas the monodentate ligands imidazole (im) and 3,5-dimethylpyrazole (dmpz) were chosen. In order to stabilize the labile intermediates, an excess of acetonitrile was used in most of the syntheses. However, the pyrazole complex was prepared through a nitrile-free route to avoid reactions at the coordinated nitrile. The solid state structures of [Mo(eta(3)-methallyl)(CO)2(terpy)]OTf (2), [Mo(eta(3)-methallyl)(CO)2(CHTA)]BAr'4 (3), [Mo(eta(3)-methallyl)(CO)2(NCMe)3]BAr'4 (4), [Mo(eta(3)-allyl)(CO)2(im)3]OTf (5) and [Mo(eta(3)-allyl)(CO)2(dmpz)3]BAr'4 (6) were determined by means of single-crystal X-ray diffraction.     

Rapid Synthesis of Lead Oxide Nanorods by One-step Solid-state Chemical Reaction at Room Temperature

A simple and facile method was reported to synthesize lead oxide nanorods. Nanorods of lead oxide were obtained directly from grinding solid metal salt and sodium hydroxide in agate mortar with the assistance of a suitable nonionic surfactant in only one step, which is different from the result of hydroxide in solution. The product has been characterized by XRD, TEM and SEM. The formation mechanism of rod-like morphology is discussed and the surfactant plays an important soft-template role in modifying the interface of solid-state reaction and according process of rod-formation.     

壳聚糖修饰玻碳电极卷积伏安法测定环境水中的EDTA

制备了壳聚糖修饰玻碳电极 ,研究了Fe(EDTA) -在修饰电极上的吸附还原行为 ,用卷积伏安法通过Fe(EDTA) -的检测测定了环境水中的EDTA。在优化的实验条件下 ,峰电流值与 8.0× 1 0 -7～ 5 .0× 1 0 -6mol L的EDTA呈线性关系 ,回归方程为epp′ =0 .75 2 5c - 0 .661 3,r =0 .991 ,最低检出限为 5 .0× 1 0 -7mol L ,5次测定的相对标准偏差小于 5 .8%。对实际样品测定的回收率为98 1 %～ 1 0 5 % ,对比HPLC的结果 ,相对偏差小于 5 %。     

Agonist–PPARγ interactions: Molecular modeling study with docking approach

Docking simulation of 18 agonists with the ligand binding pocket (LBP) of PPARγ has been performed. The binding conformations and binding affinities of these agonists were obtained by use of the flexible docking protocol FlexX. Test compound calculations indicated that FlexX can reproduce the binding conformation of the crystal structure (root mean square deviation = 1.43 Å); moreover, the predicted binding affinities correlate well with the activities of these agonists. The interaction model and pharmacophore of PPARγ agonists were derived and the difference in biologic activities of these agonists can be well explained. The PPARγ agonists must have both polar head and the hydrophobic tail, which form hydrogen bonds and hydrophobic contacts with hydrophilic and hydrophobic regions of the LBP of PPARγ, respectively. In addition, a suitable linker is also necessary. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 93: 405–410, 2003     

压力、温度和晶粒尺寸对Fe-N合金的合成及结构的影响

在 1× 1 0 - 3 Pa～ 4 GPa的压力和 5 80～ 930 K温度范围内 ,利用高压技术并结合机械球磨 ,研究了压力、温度和晶粒尺寸对α-Fe与非晶 BN的固态反应的影响 .发现高压和晶粒细化可以极大地促进α-Fe和非晶 BN的固态反应过程 ,α-Fe与非晶 BN发生固态反应的临界晶粒尺寸约 8nm.压力和温度对反应产物及其晶体结构有明显影响 .2 GPa和 80 0 K时 ,反应产物为具有正交结构的 Fe-N新相 ;在 3～ 4 GPa和 690～80 0 K时 ,可形成单一ε-Fex N合金相 ;而在 4 GPa和 930 K以上 ,反应产物由 Fe-N合金相转变为 Fe3B相