二氧化硅填料与硅橡胶在热老化时的作用

本文研究了三种表面性质不同的二氧化硅填料与二甲基硅橡胶在热老化时的作用。使混炼胶和硫化胶分别在甲苯和甲苯-氨中溶胀,测定了结合胶及溶胀度的变化。证明在老化时填料和橡胶之间有数量可观的化学键生成,并且发生氢键向化学键的转化。填料表面经过化学处理或加结构化控制剂,对它和橡胶之间的氢键结合,化学反应均有一定的抑制作用。     

Adsorption of NH3 onto activated carbon prepared from palm shells impregnated with H2SO4

Adsorption of ammonia (NH3) onto activated carbons prepared from palm shells impregnated with sulfuric acid (H2SO4) was investigated. The effects of activation temperature and acid concentration on pore surface area development were studied. The relatively large micropore surface areas of the palm-shell activated carbons prepared by H2SO4 activation suggest their potential applications in gas adsorption. Adsorption experiments at a fixed temperature showed that the amounts of NH3 adsorbed onto the chemically activated carbons, unlike those prepared by CO2 thermal activation, were not solely dependent on the specific pore surface areas of the adsorbents. Further adsorption tests for a wide range of temperatures suggested combined physisorption and chemisorption of NH3. Desorption tests at the same temperature as adsorption and at an elevated temperature were carried out to confirm the occurrence of chemisorption due to the interaction between NH3 and some oxygen functional groups via hydrogen bonding. The surface functional groups on the adsorbent surface were detected by Fourier transform infrared spectroscopy. The amounts of NH3 adsorbed by chemisorption were correlated with the contents of elemental oxygen present in the adsorbents. Mechanisms for chemical activation and adsorption processes are proposed based on the observed phenomena.     

Self-assembly of a series of extended architectures based on polyoxometalate clusters and silver coordination complexes

Three unusual compounds based on polyoxometalate building blocks, [(H2O)5Na2(C6NO2H4)(C6NO2H5)3Ag2][Ag2IMo6O24(H2O)4] x 6.25H2O (1), [(H2O)4Na2(C6NO2H5)6Ag3][IMo6O24] x 6H2O (2), and (C6NO2H6)2[(C6NO2H5)2Ag][Cr(OH)6Mo6O18] x 4H2O (3), have been synthesized and characterized by elemental analysis; IR, XPS, and ESR spectroscopy; TG analysis; and single-crystal X-ray diffraction. Compound 1 is constructed from the cationic two-dimensional (2D) coordination polymer sheets which are constituted of [(H2O)5Na2(C6NO2H4)(C6NO2H5)3Ag2]3+ and anionic [Ag2IMo6O24(H2O)4]3- chains as pillars, forming a three-dimensional (3D) supramolecular framework via weak Ag-O interactions. Compound 2 is composed of the well-defined [IMo6O24]5- building blocks, which are linked through trinuclear Ag-pyridine-3-carboxylic acid, [(C6NO2H5)6Ag3]3+, fragments into a one-dimensional (1D) hybrid chain; adjacent chains are further connected by sodium cations to yield a novel 2D network. Compound 3 has a 1D chainlike structure constructed from [Cr(OH)6Mo6O18]3- building blocks and Ag-pyridine-4-carboxylic acid coordination units. The crystal data for these compounds are the following: 1, triclinic, P1, a = 13.280(3) A, b = 13.641(3) A, c = 16.356(3) A, alpha = 89.68(3) degrees, beta = 88.31(3) degrees, gamma = 75.87(3) degrees, Z = 2; 2, triclinic, P1, a = 11.978(2) A, b = 12.008(2) A, c = 13.607(3) A, alpha = 116.14(3) degrees, beta = 108.85(3) degrees, gamma = 93.86(3) degrees, Z = 1; 3, triclinic, P1, a = 10.458(2) A, b = 10.644(2) A, c = 12.295(3) A, alpha = 97.40(3) degrees, beta = 112.38(3) degrees, gamma = 113.59(3) degrees, Z = 1.     

Addition of grignard reagents to aryl acid chlorides: an efficient synthesis of aryl ketones

[chemical reaction: see text]. Direct addition of Grignard reagents to acid chlorides in the presence of bis[2-(N,N-dimethylamino)ethyl] ether proceeds selectively to provide aryl ketones in high yields. A possible tridentate interaction between Grignard reagents and bis[2-(N,N-dimethylamino)ethyl] ether moderates the reactivity of Grignard reagents, preventing the newly formed ketones from nucleophilic addition by Grignard reagents.     

Preparation of crosslinked polystyrene-supported ethylenediamine via a S-containing spacer and adsorption properties towards metal ions

Two novel chelating resins were prepared by anchoring ethylenediamine to crosslinked polystyrene via a spacer containing sulfide. Their structures were characterized by Fourier transform-infrared spectra (FTIR) and scanning electron microscopy (SEM). Porous structure parameters of the resins were measured by ASAP 2020 using BET and BJH methods. Their adsorption capacities for several heavy metal ions especially Hg²⁺ were investigated. The results showed that for the two resins, the more N contents did not mean the better adsorption capacity and the saturated adsorption capacity of poly(2-ethylenediamidomercaptomethylstyrene) (PSM-EDA) for Hg²⁺ could reach to 3.0 mmol/g at room temperature. Isothermal adsorptions of the resins for Hg²⁺ could be described by Langmuir formula. The adsorption mechanism of the resins for Hg²⁺, Cu²⁺ and Ag⁺ was confirmed by X-ray photoelectron spectroscopy (XPS) and FTIR.     

Chloro­bis­(thio­urea‐κS)copper(I) bis(4,5‐di­aza­fluoren‐9‐one) mono­hydrate

The title compound, [CuCl(CH₄N₂S)₂]·2C₁₁H₆N₂O·H₂O, consists of mol­ecules of a Cu^I–thio­urea complex, free 4,5‐di­aza­fluoren‐9‐one (dafone) and crystalline water. The planar complex mol­ecule has trigonal coordination geometry around the Cu^I atom. The dafone and water mol­ecules, which are hydrogen bonded to the Cu^I complex, are approximately coplanar with this complex. The crystal displays a sheet structure and π–π stacking is observed between neighbouring sheets.     

Glycyl C(alpha) chemical shielding in tripeptides: measurement by solid-state NMR and correlation with X-ray structure and theory

We report here (13)C(alpha) chemical shielding parameters for central Gly residues in tripeptides adopting alpha-helix, beta-strand, polyglycine II, and fully extended 2 degrees structures. To assess experimental uncertainties in the shielding parameters and the effects of (14)N-(13)C(alpha) or (15)N-(13)C(alpha) dipolar coupling, stationary and magic angle spinning (MAS) spectra with and without (15)N decoupling were obtained from natural abundance and double-labeled samples containing [2-(13)C, (15)N]Gly. We find that accurate (<1 ppm uncertainty) shielding parameters are measured with good sensitivity and resolution in (15)N decoupled 1D or 2D MAS spectra of double-labeled samples. Compared to variations of isotropic shifts with peptide angles, those of (13)C(alpha) shielding anisotropy and asymmetry are greater. Trends relating shielding parameters to the 2 degrees structure are apparent, and the correlation of the experimental values with unscaled ab initio shielding calculations has an rms error of 3 ppm. Using the experimental data and the ab initio shielding values, the empirical trends relating the 2 degrees structure to shielding are extended to the larger range of torsion angles found in proteins.     

Ab initio study on the mechanism of reaction HNCO+NH2

Ab initio UMP2 and UQCISD(T) calculations, with 6-311G** basis sets, were performed for the titled reactions. The results show that the reactions have two product channels: NH₂+ HNCO?NH₃+NCO (1) and NH₂+HNCO?N₂H₃+CO (2), where reaction (1) is a hydrogen abstraction reaction via an H-bonded complex (HBC), lowering the energy by 32.48 kJ/mol relative to reactants. The calculated QCISD(T)//MP2(full) energy barrier is 29.04 kJ/mol, which is in excellent accordance with the experimental value of 29.09 kJ/mol. In the range of reaction temperature 2300–2700 K, transition theory rate constant for reaction (1) is 1.68×10¹¹–3.29×10¹¹ mL·mol^-1·s^-1, which is close to the experimental one of 5.0×10¹¹mL·mol^-1·s^-1or less. However, reaction (2) is a stepwise reaction proceeding via two orientation modes,cis andtrans, and the energy barriers for the rate-control step at our best calculations are 92.79 kJ/mol (forcis-mode) and 147.43 kJ/mol (fortrans-mode), respectively, which is much higher than reaction (1). So reaction (1) is the main channel for the titled reaction.     

Cellulose hydrolysis using zinc chloride as a solvent and catalyst

Cellulose gel with < 10% of crystallinity was prepared by treatment of microcrystalline cellulose, Avicel, with zinc chloride solution at a ratio of zinc chloride to cellulose from 1.5 to 18 (w/w). The presence of zinc ions in the cellulose gels enhanced the rate of hydrolysis and glucose yield. The evidence obtained from X-ray diffraction, iodine absorption experiments; and Nuclear Magnetic Resonance spectra analysis suggested the presence of zinc-cellulose complex after Avicel was treated with zinc chloride. Zinc-cellulose complex was more susceptible to hydrolysis than amorphous cellulose. Under the experimental condition, cellulose gels with zinc ions were hyrolyzed to glucose with 95% theoretical yield and a concentration of 14% (w/v) by cellulases within 20 h. The same gel was hydrolyzed by acid to glucose with 91.5% yield and a concentration of 13.4% (w/v).     

Fe–Hg Interactions and P Chemical Shifts in [Fe(CO)3 (PPh2R)2(HgCl2)] (R=pym, fur, py, thi)

In order to study the effects of R group on Fe–Hg interactions and 31P chemical shifts, the structures of mononuclear complexes Fe(CO)₃(PPh₂R)₂ (R=pym:1, fur: 2, py: 3,thi: 4; pym=pyrimidine, fur=furyl, py=pyridine, thi=thiazole) and binuclear complexes [Fe(CO)₃(PPh₂R)₂(HgCl₂)] (R=pym: 5, fur: 6, py: 7, thi: 8) were studied using the density functional theory (DFT) PBE0 method. The 31P chemical shifts were calculated by PBE0-GIAO method. Nature bond orbital (NBO) analyses were also performed to explain the nature of the Fe–Hg interactions. The conclusions can be drawn as follows: (1) The complexes with nitrogen donor atoms are more stable than those with O or S atoms. The more N atoms there are, the higher is the stabilility of the complex. (2) The Fe–Hg interactions play a dominant role in the stabilities of the complexes. In 5 or 6, thereisa σ-bond between Fe and Hg atoms. However, in 7 and 8, the Fe–Hg interactions act as σ_P–Fe→n_Hg and σ_C–Fe→n_Hg delocalization. (3) Through Fe→Hg interactions, there is charge transfer from R groups towards the P, Fe, and Hg atoms, which increases the electron density on P nucleus in binuclear complexes. As a result, compared with their mononuclear complexes, the 31P chemical shifts in binuclear complexes show some reduction.