联苯甲酰双缩氨基脲硫氰酸根硝酸根混合阴离子配位钕(Ⅲ)配合物的合成与结构

合成了联苯甲酰双缩氨基脲硫氰酸根、硝酸根混合配位的钕(Ⅲ)配合物。在此配合物中只有1个链状配体,另有2个硫氰酸根、1个硝酸根和1个水分子参与配位。总配位数是9。晶体结构分析表明,该配合物晶体属三斜晶系,P空间群。晶胞参数a=10。866(2),b=13.687(3),c=15.433(3),α=98.75(4)°,β=107.64(5)°,γ=112.14(5)°。最终偏差因子R=0.075。用INDO方法计算结果表明:NCS对Nd(Ⅲ)的配位比=C基对Nd(Ⅲ)的配位强。     

二茂铁及其胺甲基类取代衍生物的紫外光解自由基的研究

本文用自旋捕捉-ESR技术研究了二茂戊铁、环二烯和胺甲基类取代二茂铁的紫外光解过程中的活泼自由基。结果表明,二茂铁光解初级过程中生成的自由基为(C_5H_5Fe)·和C_5H_5·,其衍生物光解则生成(C_5H_5Fe)·和RC_5H_4·,而(C_5H_5Fe)·还可以进一步分解给出C_5H_5和Fe。     

三正辛胺(TOA)分离贵金属的系统研究 Ⅰ.反相萃取色层法分离七个贵金属

本文系统详细地研究了七种贵金属彼此分离以及与贱金属分离的可能条件。此种工作尚未见报道。用三正辛胺作固定相。分别用1mol/L HCl、6mol/LHCl、2mol/L HNO_3—2mol/L HCl、3mol/L HNO_3-2mol/L HCl、4mol/L HNO_3-2mo1/L HCl和5％硫脲-1mol/L HCl为淋洗液,可以将Rh、Ru、Pd、Pt、Ir、Os、Au分步淋洗下来,达到彼此完全分离。为了使Rh(Ⅱ)与贱金属分离,必须将RhC1_6~(3-)转化为RhBrb_6~(3-),然后在另一色层柱上使它与贱金属分离。合成矿样的分析结果符合分析要求。     

用透射电镜法研究聚(苯乙烯-异戊二烯)二嵌段共聚物微相分离的微区尺寸

本文采用透射电镜(TEM)法,系统地研究了具有不同组成,不同分子量和不同形态结构的聚(苯乙烯-异戊二烯)二嵌段共聚物,并由TEM照片直接测量具有栓状,层状和有规双连续双金钢石(OBDD)结构的PS-PI二嵌共聚物的微区尺寸,讨论了其与分子量的关系。实验证明嵌段共聚物微相分离有规结构的微区尺寸大小与分子量呈2/3的关系。     

Effect of Drying Methods on the Structure and Combustion Activity of Mn—Substituted Hexaaluminate Catalysts

Conventional oven drying (COD) and supercritical drying (SCD) methods were applied to the preparation of Mn-substituted hexaaluminate (BaMnA111O19-α) catalysts. The effect of drying methods on phase composition, specific surface area, pore structure, reduction behavior of Mn^3 ions, and combus-tion activity of the samples was investigated. The homogenous mixing of the components in the sol-gel process could be maintained by SCD, and the hexaaluminate phase was almost the only phase of the resulting materials after calcination. H2-TPR revealed that the Mn^3 ions in the sample obtained by SCD were easier to be reduced than that by COD. Moreover, the samples obtained by SCD have higher surface area, narrower pore size distribution, and higher combustion activity than those obtained by COD.     

光化学-荧光分析法研究——Ⅲ.片剂及注射液中安定的测定

本文提出了测定安定的光化学—荧光分析新方法。安定在含有十二烷基硫酸钠的稀硫酸介质中,经紫外光照射后,产物能发射荧光(=368nm,=476nm)。安定浓度在0～2.5μg/ml范围内,荧光强度与浓度成良好的线性关系。方法的相对标准偏差为1.5％,检出限为0.044μg/ml,可用于片剂及注射液中安定含量的测定。     

Preparation of the individual compact single-chain globular particulates of Poly(N-isopropylacrylamide)

The compact single-chain (SC) particulates of Poly(N-isopropylacrylamide) (PNIPAM), which have been formed above its lower critical solution temperature in an aqueous solution containing the surfactant of sodium n-dodecyl sulfate (SDS), were recovered from the solution by freeze-drying. Under scanning electron microscopy, the compact particulate appears as a spherical or elliptical particulate individually dispersed in SDS, which acts as a solid solvent to prevent agglomeration. The conformation of the compact SC particulates of PNIPAM dispersed in SDS had been studied by the solid-state high-resolution ¹³C NMR spectroscopy. The ¹³C spin-lattice relaxation time T ₁ of the SC sample was determined in comparison with that of the original one. It was found that the T ₁ of the methyl carbon in the isopropyl group of the SC sample was about 45% higher than that in the original multichain sample, which revealed the differences in the motion of the methyl group in the different condensed states and illuminated the characteristic conformation of the compact SC globular particulates of PNIPAM.     

Nafion化学修饰圆盘预富集-石墨炉 原子吸收联用法对牛血超氧化物歧化酶中铜、锌分布状态的研究

本文研究了Nafion化学修饰钨丝圆盘预富集-石墨炉原子吸收(GFAAS)方法测定牛血超氧化物歧化酶(SOD)中游离态Cu～(2+)及Zn～(2+)的方法,并用GFAAS法直接测定SOD中铜、锌的总量,证实了牛血SOD中金属辅基铜、锌原子个数比为1:1,初步探讨了一定浓度的牛血SOD中Cu～(2+)、Zn～(2+)的表观离解平衡常数。为提高SOD的活性和稳定性的研究,提供了一种有效的方法。     

Enhancement of photocurrent generation by honeycomb structures in organic thin films.

A light-emitting poly (distyryldimethylbenzene-co-triethylene glycol) rod-coil block copolymer was used to fabricate films with three-dimensionally ordered honeycomb structures by the breath-figure method. Photocurrent generation and photovoltaic performance are studied, and the dependence of photocurrent on applied electric field is investigated. Introducing the ordered porous structure significantly improves the photoelectric conversion behavior, because porous structures not only enhance the light-harvesting efficiency but also benefit charge separation and charge transfer. This phenomenon may have great prospects for enhancing the photovoltaic behavior of organic thin-film devices.     

Epoxy-based azo molecular glasses with four-arm architecture: Preparation,characterization and holographic recording

A series of epoxy-based azo molecular glasses with four-arm architecture was synthesized, characterized and applied to holographic recording.