Calibrating an optical fiber humidity sensor and applying it in real-time monitoring of relative humidity in fresh concrete

A doubly cladding single-mode fiber humidity sensor is fabricated by agarose. The sensor has an insertion loss of -0.08 dB and a power change of -17.83 dB. The responses of the sensor to a relative humidity （RH） range form 30% to 100% at a temperature range form 25 to 34 ~C are validated. The experiments demonstrate that the absorbability of agarose gel to moisture decreases with increasing RH in measured gas. We propose a calibration method that uses lookup tables and construct a corresponding calibration matrix. Using the sensor, we conduct real-time monitoring of RH in fresh concrete during its hardening nrocess.     

超短时延测量DFB激光器的动态线宽

激光器调谐过程中的动态线宽是非常重要的参数, 然而, 当前各种测量方法得到的都是激光器稳定状态下的静态线宽. 本文提出一种对干涉拍信号进行基于局部均值分解的时频分析进而获取激光动态线宽的方法, 通过仿真信号验证了这种时频分析方法提取瞬时相位噪声的有效性; 构建实验系统, 利用10cm路径差产生约0.5ns的超短时延, 提取相位噪声的时频分布, 首次得到了分布反馈半导体激光器在脉冲工作模式下的动态线宽. 关键词： 超短时延 动态线宽 局部均值分解 时频分布     

非高斯噪声驱动下一维双稳系统的逻辑操作

本文以成功率作为逻辑随机共振的测度, 主要研究了非高斯噪声激励下一维双稳系统的逻辑随机共振现象, 并用平均首次通过时间的方法对此现象的机理进行了解释. 研究结果表明: 只有在适当的噪声强度带或关联时间带上, 成功率才会达到共振峰值. 通过对系统参数进行优化, 提高了系统实现逻辑操作的可靠性. 关键词： 逻辑随机共振 一维双稳系统 非高斯噪声 平均首次通过时间     

基于互补屏的极化分离结构设计研究

以互补频率选择表面 (CFSS)结构的强耦合作用为基础, 设计一种具有极化分离作用的频率选择表面 (PSS), 当容性表面与感性表面沿周期排布方向具有横向位移时, CFSS成为具有TM带通、TE带阻的极化分离结构. 建立等效电路模型分析PSS结构极化分离原理, 采用耦合积分方程法计算极化分离结构的传输特性以及容性表面和感性表面的电场分布. 理论分析与实验测试结果均表明: PSS具有良好的极化分离特性和角度稳定性, 为极化波产生器和极化分离结构的设计提供借鉴. 关键词： 频率选择表面 极化选择 互补屏频率选择表面     

基于高/多光谱图像空天一体融合仿真方法

提出了一种基于高/多光谱图像的空天一体融合仿真方法. 以航空高光谱数据为基础, 根据航天多光谱遥感相关参数, 通过空天一体光谱维变换、尺度空间变换、辐射强度变换、混合像素变换和噪声变换将 航空高光谱图像中的地物目标进行空天一体映射到航天多光谱图像中, 得到特定地物目标的航天多光谱融合模拟仿真图像. 仿真实验表明该方法简便易行, 有效地减少了地物目标的三维建模和探测器响应建模的巨大工作量, 较好地实现了对特定地物目标航天多光谱图像的模拟, 开拓了遥感图像仿真模拟方法的新领域, 具有重要的研究和应用价值. 关键词： 遥感图像 空天一体 融合仿真 光谱维变换     

Metallic nanowires for subwavelength waveguiding and nanophotonic devices

Plasmonics is a rapidly developing field concerning light manipulation at the nanoscale with many potential applications, of which plasmonic circuits are promising for future information technology. Plasmonic waveguides are fundamental elements for constructing plasmonic integrated circuits. Among the proposed different plasmonic waveguides, metallic nanowires have drawn much attention due to the highly confined electromagnetic waves and relatively low propagation loss. Here we review the recent research progress in the waveguiding characteristics of metallic nanowires and nanowire-based nanophotonic devices. Plasmon modes of both cylindrical and pentagonal metallic nanowires with and without substrate are discussed. Typical methods for exciting and detecting the plasmons in metallic nanowires are briefly summarized. Because of the multimode characteristic, the plasmon propagation and emission in the nanowire have many unique properties, benefiting the design of plasmonic devices. A few nanowire-based devices are highlighted, including quarter-wave plate, Fabry-Prot resonator, router and logic gates.     

Influences of Mg^2＋ ion on dopant occupancy and upconversion luminescence of Ho^3＋ ion in LiNbO3 crystal

The effects of a Mg^2＋ ion on the dopant occupancy and upconversion luminescence of a Ho^3＋ ion in LiNbO3 crystal are reported. The birefringence gradient of the crystal is measured to investigate the optical homogeneity. The X-ray powder diffraction spectrum and the upconversion luminescence are used to investigate defect structure and spectroscopic properties of Mg,Ho：LiNbO3. Under 808-nm excitation, blue, red, and very intense yellow-green bands are observed. Based on the energy levels of Ho^3＋ in LiNbO3, and the pump intensity dependence of the observed emission, an excitation scheme is presented. The upconversion emission spectra reveal an enhancement of upconversion intensity when the Mg^2＋ ions are introduced into Ho：LiNbO3. The main upconversion mechanism is discussed in this work.     

Charge state effect on the K-shell ionization of iron by xenon ions near the Bohr velocity

Fe K-shell ionization cross sections induced by 2.4–6.0 MeV Xe20+are measured and compared with different binaryencounter-approximation(BEA)models.The results indicate that the BEA model corrected both by the Coulomb repulsion and by the effective nuclear charge(Zeff)agrees well with the experimental data.Comparison of Fe K-shell X-ray emission induced by 5 MeV xenon ions with different initial charge states(20+,22+,26+,30+)verifies the applicability of the effective nuclear charge(Zeff)correction for the BEA model.It is found that Zeffcorrection is reasonable to describe direct ionization induced by xenon ions with no initial M-shell vacancies.However,when the M shell is opened,the Zeffcorrected BEA model is unable to explain the inner-shell ionization,and the electron transfer by molecular-orbital promotion should be considered.     

船舶轴系振动教学演示实验台架设计与实验分析

通过船舶轴系振动理论和实践特点的分析,设计和制作了船舶轴系振动教学演示实验台架.同时,在教学演示实验台架与实船之间开展了比对实验,在船舶轴系振动信号、轴系扭振频谱、横振频谱、纵振频谱等关键实验环节进行了比对分析和讨论,得出了船舶轴系振动教学演示实验台架的可用性和可比性.     

全光扫描装置设计及实验研究

针对惯性约束聚变研究中高时间分辨测量的需求,详细分析并设计了一种新型的高时间分辨的全光扫描装置。该装置根据光生载流子效应、波导传输和棱镜色散原理,采用全光学元件,实现了全光器件的类条纹相机扫描功能。设计制作了具有棱镜结构和光偏转功能的全光扫描模块。以1053 nm激光为传输光,527 nm激光为泵浦光,完成了脉宽为8 ps的脉冲激光信号作用下的光偏转实验。从技术上验证了全光扫描技术的可行性。