Flammability studies of 3-methyl pyridine/water system

In industrial processes, information on the safety property of chemicals is essentially crucial for safe handling during unit operations. Ensuring the safe use of combustible or flammable substances in processes is unlikely without detailed investigations of their flammability characteristics and related hazards. We studied 3-methyl pyridine (3-picoline), e.g., flammability limits (LFL/UFL), maximum explosion pressure (P _max), maximum explosion pressure rise (dP/dt)_max, minimum oxygen concentration (MOC), vapor deflagration index (K _g), and characterized the influence of inert steam (H₂O) on critical parameters for 3-picoline/water mixtures at 270°C, 1 atm, various oxygen concentrations, and vapor mixing ratios (100/0, 30/70, 10/90 and 5/95 vol.%) with a 20-L-Apparatus in simulated conditions, respectively. The results showed that the flammability characteristics of 3-picoline_(aq) all increased with the oxygen concentration. However, as the composition of inert steam increased, the flammability parameters and the degree of fire and explosion hazards were significantly reduced, instead. This study elucidated the flammability properties of 3-picoline mixed with inert steam. The conclusions could be applied to proactively prevent the relevant processes from incurring fire and explosion accidents.     

SYNTHESES AND SPECTROSCOPIC PROPERTIES OF LANTHANIDE COMPLEXES, Ln(acac)_3(Ph_3PO)_3

A series of new complexes of formula Ln(acac)_s(Ph_3PO)_3 (where Ln~(3+)=Nd~(3+), Sm~(3+), Eu~(3+), Tb~(3+), Ho~(3+)) have been prepared and characterized. The coordination of two ligands with lanthanide ions are studied by IR spectra, ~1H, ~(13)C, ~(31)P-NMR and metal-ligand charge tranafer tranaition is also discussed via electronic adaorption and luminescence spectroscopy.     

Solar Photocatalytic Degradation of 4‐Chlorophenol in Kaolinite Catalysts

This research applies semiconductor photocatalysts, which are formed by metal ion exchange on the surface of kaolinite catalyst with cations, to the study of photocatalytic degradation of 4‐chlorophenol. The analysis results of catalyst properties shows that, after sintering at 400 °C, kaolinite catalyst has a particle size of between 10–100 nm indicating the nano level of synthesized catalysts. Under the same condition, kaolinite‐Ag/Zn catalyst works better in degradation efficiency than single kaolinite‐Ag and kaolinite‐Zn catalysts. Kaolinite‐Zn catalyst declines in degradation efficacy after 150 minutes and performs poorer than the other three types of kaolinite catalysts. In the experiments of different amounts of catalysts, when the concentration exceeds 0.1 wt%, utilization of light energy and degradation efficiency will be reduced due to shielding effect. When at different pH values, the higher the pH value, the more OH‐will be released and that is beneficial for reaction with substances and the increase of reaction rate. Finally multivariate analysis proves that there is one determining factor that influences the photocatalytic degradation of 4‐chlorophenol in kaolinite catalysts, named as “the factor with intermediates competition degree,” the one affecting the 4‐CP degradation at different weight percentages that is referred to as the “shielding effect factor.”     

alpha-Aminoallylation of aldehydes with ammonia: stereoselective synthesis of homoallylic primary amines

Three-component reactions of aldehydes, ammonia, and allylboronates were found to provide homoallylic primary amines in high yields with high chemo- and stereoselectivities. A two-step, one-pot, stereoselective synthesis of an uncommon alpha-amino acid, alloisoleucine, was achieved utilizing this reaction.     

Interaction between Metal in Metallo Enzyme and Small Biological Molecules

ＩｎｔｅｒａｃｔｉｏｎｂｅｔｗｅｅｎＭｅｔａｌｉｎＭｅｔａｌｌｏＥｎｚｙｍｅａｎｄＳｍａｌｌＢｉｏｌｏｇｉｃａｌＭｏｌｅｃｕｌｅｓ￥ＨｕＪｉｅ－Ｈａｎ；ＳｈｕＺａｎ－Ｙｏｎｇ；ＴａｏＬｉ－Ｍｅｉ；ＣｈｅｎｇＧｕｏ－Ｂａｏ（ＤａｌｉａｎＩｎｓｔｉｔｕｔ...     

丙酮一步法合成甲基异丁基酮催化剂研究

用浸渍法制备了丙酮一步法合成甲基异丁基酮负载型催化剂，考察了载体的预处理温度、添加镧助剂对催化剂性能的影响；用BET法测定了催化剂的表面积；采用H2-O2滴定法测定Pd的分散度．结果发现，用经过1．023K焙烧过的Al2O3为载体的催化剂具有较好的催化性能，添加镧助剂后催化剂的分散度、活性有较大的提高．     

Synthesis of 2,2＇-（Substituted Arylmethylene）bis（1,6,6-trimethyl 6,7,8,9-tetrahydrophenanthro[1,2-b]furan-10,11-dione） Derivatives

The reactions of tanshinone IIA with aromatic aldehydes have been investigated and several 2, T-（substituted arylmethylene） bis （1,6,6-trimethyl-6,7,8,9-tetrahydrophenanthro[1,2-b]- furan- 10, 11-dione） derivatives were obtained,     

Surface composition and property of film prepared with aqueous dispersion of polyurethaneurea-acrylate including fluorinated block copolymer

The aqueous dispersion of polyurethaneurea-acrylate (PUA) including small amount of fluorinated block copolymers containing carboxyl groups (PATF), which can be dissolved in water, was used to make films and the surface properties of these films were examined. The experimental data show that the modified PUA film exhibits a hydrophobic surface property, although the original surface of PUA film is hydrophilic. The surface composition of the modified PUA film was measured by ATR and XPS. The results indicate that there is a concentration gradient of the fluorine groups along the lines of thickness of the modified film and towards the outmost surface layer, resulting from the migration of fluorinated blocks to the air side surface of the modified PUA film during the film formation process. However, the PUA film can not be modified effectively by adding the sodium salt of PATF, since the urethane groups in the system are easy to occupy on the surface of the film.     

A kinetic stability study of MN (MBe,Mg, Ca,Sr, and Ba)

This work describes a structure and kinetic stability study of some complexes with the general formula MN, where M are the alkaline earth metal atoms, Be, Mg, Ca, Sr, and Ba. A complex (A) with two points of attachment to the N₅ ring is the most energetically favored for all metals considered here. Except for Be, structure (B) containing a mono‐coordinated metal atom is a transition state corresponding to the metal atom transfer around the N₅ ring. Pyramidal structure (C) is kinetically unstable with the low isomerization barrier height, ranging from 0.9 to 6.7 kcal/mol. The dissociation barrier heights for the lowest energy isomers (A) are predicted to be 1.2–18.7 kcal/mol (Be to Ba), indicating that kinetic stability increases from lighter to heavier metal atoms. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

Synthesis of 6（E）—Geranylgeraniol—19—oic Acid

Facile synthesis of 6(E)-geranylgeraniol-19-oic acid 1,a naturally occurring alicyclic diterpene acid, by a Horner-Wadsworth-Emmons olefination of two readily available fragments 2 and 3,is described.