Ligand and base additive effects on the reversibility of nucleophilic addition in palladium-catalyzed allylic aminations monitored by nucleophile crossover

A nucleophile crossover experiment was used to monitor the reversibility of nucleophilic addition of benzylamine to π-allylpalladium complexes. Dppe, dppp, dppb, and PHOX showed more crossover than PPh₃ and dppm in both DMF and dichloromethane. Crossover was inhibited by the addition of DBU or Cs₂CO₃, but much less elimination to diene side products was observed with Cs₂CO₃. Analysis of percent crossover vs. percent reaction completion using the PHOX ligand revealed that with added DBU or Cs₂CO₃ crossover only began occurring after 100% completion had been reached.     

Effect of liquid oils on the properties of multiple emulsions containing liquid crystals

Recently, many cosmetic researchers have been focused on multiple emulsions due to better performance. Limited application of multiple emulsions has been attributed to their instability, which can be resolved by the presence of liquid crystals. Multiple emulsions containing liquid crystals are affected by various formulation parameters, such as liquid oils. In this paper, the influence of liquid oils on the formation mechanism was studied. Besides, stability, small-angle x-ray scattering (SAXS) spectra analysis, and rheological analysis of the emulsions were investigated as well. The results showed that when the gap of the polarity between inner oils and external liquid oils is greater, the multiple structures were more easily formed. Multiple emulsions containing liquid crystals were superior in stability to multiple emulsions prepared in the same way with liquid oils that did not form liquid crystals. SAXS indicated that the liquid crystal orientation was lamellar. Rheological analysis indicated that the different structure emulsions showed shear-thinning behavior. The presence of liquid crystal decreased the viscosity and resulted in pseudoplastic enhancement. Both the storage modulus (G′) and the loss modulus (G″) of multiple emulsions were slightly higher than those of O/W-type emulsions, implying the existence of multiple structures.     

MEMS微梁粘着动力分析

针对严重影响MEMS性能和可靠性的微梁粘着问题,根据W-S微观连续介质理论,建立了粘着力数学模型;针对粘着力对微梁刚度的强非线性影响,利用单元离散法,通过对粘着力时空变量相分离,对500μm×1μm×0.1μm表面镀金的微悬臂梁粘着进行了动力仿真,发现了“跳跃粘着”现象,从而为微梁的系统研究提供理论基础。     

A rigorous assessment of the benefits of miniaturization in the Kolsky bar system

A rigorous experimental and numerical assessment is made of the benefits and limits of miniaturization in the Kolsky bar system. The primary issues that arise in very high strain rate testing (stress equilibration, inertial effects, wave dispersion, friction, and controllability of deformations) are addressed through experiments coupled with explicit finite element analyses. A miniaturized Kolsky bar system that includes the input bar is developed, together with the use of the laser occlusive radius detector to obtain local measurements of specimen strain during the very high rate deformations. It is demonstrated that this miniaturized Kolsky bar system can be used to provide fully validated results, including the explicit determination of equilibration, over a very wide range of strain rates (1×10³ to 5×10⁴ s⁻¹). The desired high strain rate can be achieved even at low accumulated strains, and the total strain developed can be controlled very effectively. Specific conditions are developed for determining the range of utility of the technique for a given material. The technique is applied to the characterization of 6061-T651 aluminum, and the results are compared with the results obtained using a conventional Kolsky bar.     

稳恒扩展裂纹尖端的弹粘塑性场

采用弹粘塑性力学模型代替通常的弹塑性模型，对于I型和Ⅱ型问题，分别求得了不可压缩材料中平面应变动态扩展裂纹尖端的指数奇异性场和对数奇异性场，消除了弹塑性解中存在的塑性激波。通过数值计算，分别求得了两种奇异属性的分界线，建立起统一的裂纹尖端奇异性场。     

云纹干涉制栅新技术

本文介绍了两种新的光栅复制技术,它们具有快速、高质量、低成本、操作简单、使用方便、不需特殊仪器等特点.该技术从我国一般力学实验室条件出发,解决了试件栅制作困难,其中漆栅方法可极大地缩短云纹干涉方法的实验周期,该技术也为光栅测试技术的广泛应用提供了方便.     

99mTc-AMD3100: A novel potential receptor-targeting radiopharmaceutical for tumor imaging

<正>The chemokine CXCR4 receptor is over-expressed in a wide variety of tumors.In this study,AMD3100,which was a prototype non-peptide antagonist of CXCR4 receptor,was labeled with ~(99m)Tc.~(99m)Tc-AMD3100 was verified by thin layer radio chromatography(TLRC).The tumor-localizing properties of ~(99m)Tc-AMD3100 were evaluated and proved in mice bearing Hep-G2 tumor xenograft.~(99m)Tc-AMD3100 was a promising,novel receptor-specific radiopharmaceutical with potential application in the imaging of human tumors.     

Tetra(acetylacetonato) tin(Ⅳ) as new catalyst for polytrimethylene terephthalate synthesis

<正>Chelate tetra(acetylacetonato) tin(Ⅳ) was prepared and used as catalyst for polytrimethylene terephthalate synthesis.It exhibited higher catalytic activity than tetrabutyl titanate,butyltinhydroxide oxide and dibutyltin oxide.Decrease in reaction time, content of terminal carboxyl group,color intensity and increase in intrinsic viscosity were observed.The unique molecular structure can be considered as factor remarkably improving the catalytic activity of tetra(acetylacetonato) tin(Ⅳ).     

Viscosity effect on the CIDEP of laser photolysis of duroquinone in hydrogen-donor solvents

Chemically induced dynamic electron polarization (CIDEP) is one of the important research fields of dynamic spin chemistry. In the present work, with ethylene glycol, 1,2-propanol and their mixtures with different ratios in volume as solvents and duroquinone as photosensitive molecule, the influence of solvent viscosity on the CIDEP of photolyzed duroquinone radicals has been studied experimentally. In each solvent, duroquinone neutral radicals are observed. Duroquinone neutral radicals are generated through hydrogen transfer reaction from hydrogen-donor solvent molecules to excited duroquinone triplet. The CIDEP mechanism is mainly triplet mechanism. The CIDEP intensity of duroquinone neutral radicals decreases with the increase in the solvent viscosity, and the variation was rapid in low-viscosity range and slow in high-viscosity range.     

Electrophoretic sol–gel synthesis of SrBi<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>9</Subscript> nanowires

We report the independent invention of perovskite ferroelectric nanowires strontium bismuth tantalate (SrBi₂Ta₂O₉, SBT). Electrophoretic sol–gel techniques have been used successfully. The morphology and structures are analyzed via SEM, TEM and XRD. SBT nanowires and nanoparticles filled template revealed 30 and 40 μm long, respectively. SBT are proved to be a single phase of orthorhombic perovskite structure. As it indicated, SBT nanowires has been crystallized at 700 °C. To minimize surface polarity, SBT nanowires oriented preferentially along the growing axis (c axis) by translation and rotation of atomic clusters of SBT.