水玻璃砂中碳酸盐含量的测定

将水玻璃砂样品(10~20g)置于测定装置的反应瓶中,并在吸收瓶中预先加入氢氧化钡标准溶液25.00mL,加水至吸收液的总体积为60mL,检查测定装置的气密性。向反应瓶中加入过量硫酸(1+9)溶液使样品中的碳酸盐反应定量释放出二氧化碳气体。反应时间约为0.5min。释出的二氧化碳导入吸收瓶中,与氢氧化钡反应生成碳酸钡沉淀。多余的氢氧化钡用盐酸标准溶液滴定,据此计算样品中碳酸盐的含量。为使吸收充分完全,采用内部强制循环吸收的方法并规定吸收时间至少15min,如样品中碳酸钠含量较高时,可延长吸收时间至20min或30min。试验时,加入标准碳酸钠量为0.104 7g,3次测定的平均值为0.106 5g,相对平均偏差为1.8%。     

Perfluorinated compounds in blood of textile workers and barbers

12 perfluorinated compounds（PFCs） in human blood from workers in a textile mill in Shandong province and several barbershops in Tianjin were analyzed in this study. It was found that perfluorooctanesulfonate（PFOS） and perfluorooctanoate（PFOA） were the most prominent PFCs, with average concentrations of 5.73 mg/L and 5.46 mg/L for textile workers, and 2.55 mg/L and 2.84 mg/L for barbers.PFOS and perfluorohexanesulfonate（PFHxS） concentrations revealed a positive correlation in blood samples（p 〈 0.01）, and concentrations among PFOS, perfluorononanoic acid（PFNA） and perfluorodecanoic acid（PFDA） also revealed positive correlations（p 〈 0.01）. The influence of gender and age on PFC concentration in blood was also investigated, and the results showed that there was no statistically significant difference between the male and female samples, as well as in samples from people with different ages. Generally speaking, the textile workers     

Design of novel bis-benzimidazole derivatives as DNA minor groove binding agents

A new series of bis-benzimidazole derivatives were designed and synthesized.In vitro cytotoxicity evaluation showed that these compounds exhibited high activity against the selected tumor cells.Among them,compound 9 owned the best potential,its IC_(50) values being 5.95 μmol/L(mononuclear tumor cell line(U937)) and 5.58 μmol/L(cervical cancer cell(HeLa)).Fluorescence and UV-vis studies showed that compound 9 could bind into the minor groove of DNA.     

Immobilization of chiral Rh catalyst on glass and application to asymmetric transfer hydrogenation of aryl ketones in aqueous media

A chiral catalyst, Cp＊RhTsDPEN （Cp＊ = pentamethyl cyclopentadiene, TsDPEN = substitutive phenylsulfonyl-l,2-diphenylethylenediamine）, was synthesized and immobilized at the surface of glass. The immobilized catalyst exhibited good catalytic efficiency for asymmetric transfer hydrogenation of aromatic ketones in water with HCOONa as hydrogen source.     

Catalytic performance of cement clinker supported nickel catalyst in glycerol dry reforming

The paper reports the development of cement clinker-supported nickel （with metal loadings of 5 wt%, 10 wt%, 15 wt% and 20 wt%） catalysts for glycerol dry （CO2） reforming reaction. XRF results showed that CaO constituted 62.0% of cement clinker. The physicochemical characterization of the catalysts revealed 32-folds increment of BET surface area （SBET） with the addition of nickel metal into the cement clinker, which was also corroborated by FESEM images. Significantly, XRD results suggested different types of Ni oxides formation with Ni loading, whilst Ca3SiO5 and Ca2Al0.67Mn0.33FeO5 were the main crystallite species for pure cement clinker. Temperature-programmed reduction analysis yielded three domains of H2 reduction peaks, viz. centered at approximately 750 K referred to as type-Ⅰ peaks, another peaks at 820 K denoted as type-Ⅱ peaks and the highest reduction peaks, type-Ⅲ recorded at above 1000 K. 20 wt% Ni was found to be the best loading with the highest XG and H2 yield, whilst the lowest methanation activity. Syngas with lower H2/CO ratios （0.6 to 1.5） were readily produced from glycerol dry reforming at CO2-to-Glycerol feed ratio （CGR） of unity. Nonetheless, carbon deposit comprised of whisker type （Cv） and graphitic-like type （Cc） species were found to be in majority on 20 wt%Ni/CC catalysts.     

电感耦合等离子体原子发射光谱法测定人造金刚石中铁、钴、锰、镍

1引言近年来,我国人造金刚石的产量和应用有了很大的发展。以现有的人造金刚石合成技术,通常以Fe,Ni,Co,Mn等元素组成的合金作为触媒,这使人造金刚石中极易残留这些金属组成的包裹体。诸多研究表明,包裹体含量和分布情况对人造金刚石的性能有着重要影响[1]。经查阅文献,已有使用X射线荧光光谱法对人造金刚石中杂质元素含量进行半定量分析的报道[2]。电感耦合等离子体发射光谱法(ICP-AES)被广泛应用于岩矿、土壤样品中多元素分析[3]。本实验以在大气气氛中高温灰化和混合酸对样品进行前处理,采用ICP-AES测定人造金刚石中Fe,Co,Ni和Mn。本方法操作简便,处理效果良好。     

Iron-mediated AGET ATRP of styrene and methyl methacrylate using ascorbic acid sodium salt as reducing agent

Atom transfer radical polymerization of styrene(St) and methyl methacrylate(MMA) in bulk and in different solvents using activators generated by electron transfer(AGET ATRP) were investigated in the presence of a limited amount of air using FeCl3·6H2O as the catalyst, ascorbic acid sodium salt(AsAc-Na) as the reducing agent, and a cheap and commercially available tetrabutylammonium bromide(TBABr) as the ligand. It was found that polymerization in THF resulted in shorter induction period than that in bulk and in toluene for AGET ATRP of St, while referring to AGET ATRP of MMA, polymerization in THF showed three advantages compared with that in bulk and toluene: 1) shortening the induction period, 2) enhancing the polymerization rate and 3) having better controllability. The living features of the obtained polymers were verified by chain end analysis and chain-extension experiments.     

Rapid Isolation of a Facultative Anaerobic Electrochemically Active Bacterium Capable of Oxidizing Acetate for Electrogenesis and Azo Dyes Reduction

In this study, 27 strains of electrochemically active bacteria (EAB) were rapidly isolated and their capabilities of extracellular electron transfer were identified using a photometric method based on WO₃ nanoclusters. These strains caused color change of WO₃ from white to blue in a 24-well agar plate within 40 h. Most of the isolated EAB strains belonged to the genera of Aeromonas and Shewanella. One isolate, Pantoea agglomerans S5-44, was identified as an EAB that can utilize acetate as the carbon source to produce electricity and reduce azo dyes under anaerobic conditions. The results confirmed the capability of P. agglomerans S5-44 for extracellular electron transfer. The isolation of this acetate-utilizing, facultative EBA reveals the metabolic diversity of environmental bacteria. Such strains have great potential for environmental applications, especially at interfaces of aerobic and anaerobic environments, where acetate is the main available carbon source.     

Solution Blowing of Poly（dimethylsiloxane）/Nylon 6 Nanofiber Mats for Protective Applications

A new strategy was developed to fabricate superhydrophobic nylon 6 nanofibers, in which the blend solutions of poly(dimethylsiloxane)(PDMS) prepolymer and nylon 6 was spun using an innovative solution blowing process, and then the PDMS prepolymer contianning nanofibers were cured to obtain PDMS/nylon 6 nanofiber mats. Morphology, surface composition, non-wetting property and protective performance were investigated. The results showed that the addition of PDMS prepolymer improved the spinnability of the spinning solutions, and the PDMS/nylon 6 nanofibers had smooth surfaces and diameters from 100 nm to 350 nm. The presence of PDMS effectively enhanced the hydrophobicity of the nanofiber mats, showing water contact angles of 132° to 161° for PDMS contents of 1 wt% to 3 wt%. The PDMS/nylon 6 mats also possessed excellent protective and transport properties. The results indicated the potential application of the novel nanofiber mats in protective clothing.     

Screening,Growth Medium Optimisation and Heterotrophic Cultivation of Microalgae for Biodiesel Production

This article presents a study on screening of microalgal strains from the Peking University Algae Collection and heterotrophic cultivation for biodiesel production of a selected microalgal strain. Among 89 strains, only five were capable of growing under heterotrophic conditions in liquid cultures and Chlorella sp. PKUAC 102 was found the best for the production of heterotrophic algal biodiesel. Composition of the growth medium was optimised using response surface methodology and optimised growth conditions were successfully used for cultivation of the strain in a fermentor. Conversion of algal lipids to fatty acid methyl esters (FAMEs) showed that the lipid profile of the heterotrophically cultivated Chlorella sp. PKUAC 102 contains fatty acids suitable for biodiesel production.