Weighted mean velocity feedback strategy in intelligent two-route traffic systems

Information feedback strategies can influence the traffic efficiency of intelligent traffic systems greatly. Based on the more practical symmetrical two-route scenario with one entrance and one exit, an improved Weighted Mean Velocity Feedback Strategy (WMVFS) is proposed, which is not sensitive to the precision of Global Position System (GPS) devices. The applicability of WMVFS to different weight factors, aggressive probabilities, densities of dynamic vehicles, and different two-route scenarios (symmetrical scenario and asymmetrical scenario with a speed limit bottleneck) is analyzed. Results show that WMVFS achieves the best performance compared with three other information feedback strategies when considering the traffic flux and stability.     

激子复合区厚度对有机磁效应的影响

在常规型有机发光二极管的基础上, 通过改变发光层tri-(8-hydroxyquinoline) aluminum (III) (Alq₃)厚度, 研究了激子复合区厚度对有机发光二极管磁效应的影响.测量了器件在不同温度及偏压下电致发光及注入电流在外加磁场作用下的变化, 着重研究了低温下的有机磁电导效应和有机磁电致发光效应.实验发现, 低温(50 K)高磁场 (500 mT)下, 器件表现出随Alq₃厚度的减薄, 磁电导值由正到负再到正的非单调变化.利用磁场调控的超精细相互作用、 磁场抑制的三重态激子-电荷反应以及激子在界面的淬灭效应, 对有机磁电导在低温下表现出的现象进行了定性的解释.实验结果表明, 通过改变激子复合区的厚度, 可以实现对激子浓度的有效调节, 进而实现对有机磁电导和磁电致发光效应的调节. 该研究进一步丰富了有机磁效应的实验现象, 同时提供了一种调控有机磁效应的手段. 关键词： 激子复合区 激子浓度 有机磁电导 有机磁电致发光     

利用皮秒脉冲激光驱动瞬态X射线激光

报道了利用皮秒激光驱动产生瞬态类镍银X射线激光的实验结果.采用一路脉冲宽度为数百皮秒的激光作为预脉冲，配合另一路皮秒激光作为主脉冲联合驱动平面靶，获得了一定强度的类镍银X射线激光输出，输出能量约为5—10nJ. 关键词： 瞬态X射线激光 长短脉冲联合驱动 皮秒脉冲激光     

Application of novel SIMS technique for imaging the active sites of oxygen reduction at the SOFC cathode/electrolyte interfaces

The oxygen reduction active sites were visualized around the O₂/SOFC cathode/electrolyte triple phase boundaries (TPB) by the¹⁶O/¹⁸O exchange techniques and secondary ion mass spectrometry (SIMS) analysis. The higher¹⁸O concentration is observed on the cathode top surfaces (La_0.9Sr_0.1MnO₃-mesh, Au-mesh, and Ag-porous), which suggested the promotion of oxygen adsorption and oxygen surface exchange at the cathode. The oxygen diffusion through the bulk of cathode occurred at the La_0.9Sr_0.1MnO₃-mesh and the Ag-porous cathodes, not at the Au-mesh cathode. On the YSZ surfaces after removing the cathode, the active sites for oxygen incorporation were analyzed by SIMS. The active sites for oxygen incorporation were at the La_0.9Sr_0.1MnO₃/YSZ interface as well as the TPB. On the other hand, the active sites for oxygen incorporation are limited to the TPB in the case of the Au-mesh removed YSZ surface. From the SIMS analysis, the expansion of the active sites for oxygen incorporation is less than a few μm from the TPB lines. Paper presented at the 8th EuroConference on Ionics, Carvoeiro, Algarve, Portugal, Sept. 16–22, 2001.     

Enhancement of feasibility of macroscopic quantum superposition state with the quantum Rabi-Stark model

We propose an efficient scheme to generate a macroscopical quantum superposition state with a cavity optomechanical system, which is composed of a quantum Rabi-Stark model coupling to a mechanical oscillator. In a low-energy subspace of the Rabi-Stark model, the dressed states and then the effective Hamiltonian of the system are given. Due to the coupling of the mechanical oscillator and the atom-cavity system, if the initial state of the atom-cavity system is one of the dressed states, the mechanical oscillator will evolve into a corresponding coherent state. Thus, if the initial state of the atom-cavity system is a superposition of two dressed states, a coherent state superposition of the mechanical oscillator can be generated. The quantum coherence and their distinguishable properties of the two coherent states are exhibited by Wigner distribution. We show that the Stark term can enhance significantly the feasibility and quantum coherence of the generated macroscopic quantum superposition state of the oscillator.     

A brief review of thermal transport in mesoscopic systems from nonequilibrium Green’s function approach

With the rapidly increasing integration density and power density in nanoscale electronic devices, the thermal management concerning heat generation and energy harvesting becomes quite crucial. Since phonon is the major heat carrier in semiconductors, thermal transport due to phonons in mesoscopic systems has attracted much attention. In quantum transport studies, the nonequilibrium Green’s function (NEGF) method is a versatile and powerful tool that has been developed for several decades. In this review, we will discuss theoretical investigations of thermal transport using the NEGF approach from two aspects. For the aspect of phonon transport, the phonon NEGF method is briefly introduced and its applications on thermal transport in mesoscopic systems including one-dimensional atomic chains, multi-terminal systems, and transient phonon transport are discussed. For the aspect of thermoelectric transport, the caloritronic effects in which the charge, spin, and valley degrees of freedom are manipulated by the temperature gradient are discussed. The time-dependent thermoelectric behavior is also presented in the transient regime within the partitioned scheme based on the NEGF method.     

LaAlO_3/SrTiO_3界面增强光伏效应

探索LaAlO_3/SrTiO_3(LAO/STO)界面产生的新奇物理特性对理解关联电子系统中多自由度耦合和设计功能材料器件具有重要的价值.本文通过脉冲激光沉积方法在SrTiO_3基底上制备了LAO/STO薄膜,研究了正面照射LAO/STO膜面和侧面照射LAO/STO界面时的光伏效应,探讨了LAO/STO界面对光伏效应的影响.研究结果表明,在同样光照能量下侧面照射LAO/STO界面产生的光电压远高于正面照射LAO/STO膜面产生的光电压,说明LAO/STO界面对光伏效应有明显的增强作用.通过偏压调控可以进一步增强照射LAO/STO界面产生的光电压,当偏压为60 V时, LAO/STO样品的位置探测灵敏度达到了36.8 mV/mm.这些研究结果为设计场调控位置敏感探测器等新型光电子器件提供了新的思路.     

Classical and Bayesian Inference of an Exponentiated Half-Logistic Distribution under Adaptive Type II Progressive Censoring

The point and interval estimations for the unknown parameters of an exponentiated half-logistic distribution based on adaptive type II progressive censoring are obtained in this article. At the beginning, the maximum likelihood estimators are derived. Afterward, the observed and expected Fisher’s information matrix are obtained to construct the asymptotic confidence intervals. Meanwhile, the percentile bootstrap method and the bootstrap-t method are put forward for the establishment of confidence intervals. With respect to Bayesian estimation, the Lindley method is used under three different loss functions. The importance sampling method is also applied to calculate Bayesian estimates and construct corresponding highest posterior density (HPD) credible intervals. Finally, numerous simulation studies are conducted on the basis of Markov Chain Monte Carlo (MCMC) samples to contrast the performance of the estimations, and an authentic data set is analyzed for exemplifying intention.     

Simultaneously Enhancing Mechanical Properties and Melt Flow Ability of Polyamide 6 by Blending with a Hyperbranched Polymer

A series of polyamide 6/hyperbranched polymers (PA6/HBP) blends with different HBP contents was prepared by melt processing using a twin-screw extruder. The HBP was synthesized on the basis of pentaerythritol and dimethyl terephthalate according to a one-step method. The melt flow behavior, crystallization behavior, morphology, and mechanical properties of the PA6/HBP blends were investigated. The results showed that the melt flow index of the blends was greatly improved by a small amount of HBP. The yield strength, tensile modulus, Izod impact strength, and flexural strength of samples were simultaneously enhanced from 54.6 MPa, 0.5 GPa, 3.8 kJ/m², 56.9 MPa for pure PA6 to 61.1 MPa, 0.7 GPa, 5.3 kJ/m², 67.1 MPa for PA6 blends with 2.0 wt% HBP, respectively. The PA6/HBP blends showed the higher content of α-form crystal and a higher degree of crystallinity than those of pure PA6.