Polarized infrared reflectivity study in charge density wave conductor Tl0.3MoO3

Polarized infrared reflectivity measurements between 300 and 10 K have been carried out on charge density waves (CDW) conductor blue bronze Tl_0.3MoO₃. Three important features are observed: (i) A bump at 1155 cm⁻¹ in the reflectivity spectra of Tl_0.3MoO₃ at 300 K is a precursor of the Peierls gap due to optical excitations across a pseudogap, and this kind of Peierls-like gap opens gradually with decreasing temperature from 180 to 160 K. (ii) The three sharp modes as “triplet” of infrared reflectivity between 800 and 1000 cm⁻¹ of Tl_0.3MoO₃ along [1 0 2] axis show red shift compared to K_0.3MoO₃ and Rb_0.3MoO₃, which is assigned to the increase of the distance of Mo-O bond with the substitution of thallium ions. (iii) Two peaks at about 514 and 644 cm⁻¹ in the far-infrared reflectivity spectra of Tl_0.3MoO₃ along [1 0 2] direction are suggested to be the electronic transitions from the valence band to the midgap state and from occupied midgap state to the conduction band, respectively.     

Power flow analysis for a floating sandwich raft isolation system using a higher-order theory

A higher-order sandwich theory is implemented in conjunction with an equivalent mobility-based power flow progressive method to determine power flow for a sandwich configured floating raft vibration isolation system. The power spectrum changes in whole frequency range effectively when core materials’ properties change. It is also shown that the loss factors of the sandwich configured floating raft influence the power flow transmitted to the foundation effectively in the medium- to high-frequency range and that the resonant peak cannot be avoided by increasing damping only in high-frequency ranges which is not found in floating raft isolation systems with isotropic beams.     

Quantification of local oxygen defects around Yttrium ions for yttria-doped ceria–zirconia ternary system

Local coordination structure around Yttrium ions in CeO₂–Y₂O₃ binary and [(CeO₂)_x(ZrO₂)_1?x]_0.8(YO_1.5)_0.2 (x = 0.0 ~ 1.0) ternary system has been investigated by ⁸⁹Y MAS-NMR. NMR spectra are found to be consisted of multiple peaks that can be assigned to 6-, 7- and 8-oxygen coordinated Yttrium ions. Compositional dependence of the spectrum was observed and compared with the previous results for ZrO₂–Y₂O₃ binary system. The present investigation suggested the degree of localization of the oxygen vacancy around the cation is in the order of Zr⁴⁺ > Y³⁺ > Ce⁴⁺. The degree of the oxygen vacancy preference for each cation was quantitatively determined for CeO₂–ZrO₂–Y₂O₃ ternary system the first time.     

控制液晶器件产生的程控透镜和微透镜阵列

研究了计算机程控光学器件的性能。通过对液晶空间光调制器进行电寻址控制,得到了振幅模式、二进制相位模式和连续相位模式的计算机程控透镜和程控微透镜阵列。实验结果和计算分析都表明,连续相位模式的程控透镜具有较好的聚焦性能和光效率。程控微透镜阵列的优点是阵列中的每一个微透镜都可以单独控制,可以得到所需要的阵列形式。实验给出了一个由这样的微透镜阵列产生的去掉了中心4×4阵列的8×8光斑阵列样式。还给出了利用程控透镜来方便有效地演示和研究透镜的像差方法。由计算机控制空间光调制器得到的光学器件虽然具有极大的灵活性,但是由于空间光调制器的像素的尺寸影响了它的精细程度,限制了它的应用。     

C60在几种溶剂中紫外吸光度的负热效应

所采用的变温光谱差减方法是将待测试样分成两份 ,一份作为参比试样 ,恒定在某一温度 (参比温度 )下 ,另一份作为待测样品 ,选定另一待观测温度 ,在一定的波长范围内 ,用岛津UV 2 4 0型紫外 可见双光束分光光度计扫描 ,获得紫外吸收温差光谱 (UVSDT)。选择不同的温度差 ,测得温差光谱随温差的变化。观测了C60 分子在乙醇、环己烷、正己烷、异丙醇等几种有机溶剂中吸光度随温度的变化。观测结果发现C60 溶液的吸光度变化存在显著的负温度效应。C60 的UV吸收光谱峰随试样温度升高而降低 ,UV吸收温差光谱 (U VSDT)为负峰 ,UVSDT峰强随温差增大而负向增大。说明C60 的结构对温度有较强的依赖关系。这种依赖关系与π π 电子跃迁类型密切相关。实时现场测量C60 溶液的吸光度随温度变化规律 ,对分离、纯化、分析富勒烯 ,认识C60 特性、研究以溶剂为媒介的化学反应机理 ,以及提高测量的准确度和重现性等 ,均有一定的理论意义和实用价值     

电场催陈米酒核磁共振分析

以自行研制的设备对新产广东玉冰烧米酒进行催陈 (处理条件 :4 0kV·m- 1 的电场强度处理 180min ,5 0Hz) ;然后采用1 HNMR对新酒、电场催陈酒及成品酒进行了分析 ,研究发现新酒中甲基和亚甲基峰出现了 4个杂峰而其他样品没有 ,说明新酒中单分子与各种状态的缔合结构共存 ,其他各主要有机物质亦参与成峰 ;而关于羟基质子峰 ,新酒为平头峰 ,推断出溶液中有 2种羟基质子存在 ,一种参与形成缔合 ,另一种未参与缔合 ;成品酒为单一峰 ,说明溶液中形成了单一稳定的大分子缔合结构 ;电场处理酒样为不规则峰 ,反映出多种缔合状态共存 ,其主要缔合结构接近成品酒缔合结构     

自相位调制和交叉相位调制共同作用下抽运探测波结构中的信号扰动研究

针对强度调制直接检测波分复用系统研究了抽运探测波结构中自相位调制和交叉相位调制共同作用下的光信号传输,给出了确定任意抽运信号下的探测波时域波形及强度调制率的理论解析方法,分析了信道间隔、传输速率对于交叉相位调制的影响,发现抽运波自相位调制的作用主要体现在使探测波时域强度调制率有所增大,解析结果和数值仿真能较好地吻合。     

用Origin软件处理物理实验数据

用Origin软件对物理实验数据进行处理,简单易行、方便可靠。     

海藻酸钠的疏水改性及释药性能研究

为了提高对疏水性药物的负载量和缓释作用,将海藻酸钠氧化后与十二胺反应使其进行疏水改性.对改性后聚合物结构进行了表征.研究了聚合物在水溶液及盐溶液中的粘度变化;将聚合物分散于NaCl/CaCl2的混合溶液中制备成凝胶微球,对药物布洛芬进行了包埋释放实验.结果表明,疏水改性后的海藻酸钠粘度增加,其凝胶微球对布洛芬负载量提高,具有较好的缓释作用.