Polyester Fabric’s Fluorescent Dyeing in Supercritical Carbon Dioxide and its Fluorescence Imaging

As one of the most important coumarin-like dyes, disperse fluorescent Yellow 82 exhibits exceptionally large two-photon effects. Here, it was firstly introduced into the supercritical CO₂ dyeing polyester fabrics in this work. Results of the present work showed that the dyeing parameters such as the dyeing time, pressure and temperature had remarkable influences on the color strength of fabrics. The optimized dyeing condition in supercritical CO₂ dyeing has been proposed that the dyeing time was 60 min; the pressure was 25 MPa and the temperature was 120 °C. As a result, acceptable products were obtained with the wash and rub fastness rating at 5 or 4–5. The polyester fabrics dyed with fluorescent dyes can be satisfied for the requirement of manufacturing warning clothing. Importantly, the confocal microscopy imaging technology was successfully introduced into textile fields to observe the distribution and fluorescence intensity of disperse fluorescent Yellow 82 on polyester fabrics. As far as we know, this is the first report about supercritical CO₂ dyeing polyester fabrics based on disperse fluorescent dyes. It will be very helpful for the further design of new fluorescent functional dyes suitable for supercritical CO₂ dyeing technique.     

二维单层硒化钼和硒化钨晶体的声子辅助上转换荧光光谱

声子辅助的上转换荧光是固体激光制冷效应的基础. 激光制冷具有体积小、效率高、无振动干扰、无需制冷剂等优势而具有重要应用价值, 探索更多可以实现激光制冷效应的材料是相关领域的重要研究内容. 二维单层过渡金属硫属半导体化合物是直接带隙荧光材料, 其完美的晶格结构、辐射光子提取效率高等特征使其有望成为一种新型激光制冷材料. 以MoSe₂和WSe₂为例, 本文研究了不同波长激发下样品的上转换荧光, 并通过激光功率依赖性实验和温度依赖性实验证实了该上转换荧光过程的发光机制为声子辅助过程.     

基于非平衡光纤干涉仪的窄线宽激光光源跳模实时测试方法

窄线宽激光器随机发生的跳模现象,是影响光学系统稳定的重要因素.激光器线宽窄往往意味着较长的谐振腔和较小的模间隔,从而给跳模的监测带来了难度.本文提出一种基于非平衡光纤干涉仪的窄线宽光源跳模测试方法,该方法将激光器跳模的频率变化转变为干涉仪的相位变化,并通过相位产生载波(PGC)调制解调技术来检测相位信息,从而实现对跳模过程的监测.该方法灵敏度高,能够长时间连续监控,测试效果优于Fabry-Pérot干涉仪,还可在kHz量级上测量窄线宽激光器的线宽,为单纵模窄线宽激光器研究提供有效的测试手段.     

红外测温法研究Al-Mg合金中的Portevin-Le Chatelier效应

试件塑性变形过程伴随着机械能向热能的转化.利用红外测温法,通过分析红外热像仪采集的温度场图像,系统研究了Al-Mg合金中的Portevin-Le Chatelier （PLC）效应.在不同应变率下,实验得到了三类锯齿形应力-应变曲线,分析了相应情况下试件温度变化曲线的异同及其原因,探讨了三种类型PLC变形带的空间传播特性.研究发现,试件表面的温升随着应变率的增加而增加;PLC带的倾角转向发生在试件的两端或者带外的温度最高处. 关键词： Portevin-Le Chatelier效应 红外测温 Al-Mg合金     

溶液法铝诱导晶化制备多晶硅薄膜

采用铝（Al）盐溶液作为诱导源进行了非晶硅晶化成多晶硅的研究.光学显微镜观测与Raman光谱分析表明,合适配比的铝盐溶液能够将非晶硅予以诱导晶化.采用剥层XPS测试分析,探究了Al盐溶液与硅表面可能的化学反应以及随之发生的硅-铝层交换的过程.最后对溶液法诱导晶化的机理进行了讨论. 关键词： 铝诱导晶化 多晶硅薄膜 溶液法     

椭圆型激光驻波场作用下Cr原子的汇聚特性研究

利用近共振激光驻波场操纵中性原子实现纳米级条纹沉积技术是一种新型的研制纳米结构长度标准传递的方法.分析了Cr原子在椭圆型激光驻波场作用下的沉积特性,分别对不同椭圆激光驻波场功率下Cr原子的沉积条纹及不同y平面上沉积条纹特性进行了模拟和分析.同时针对椭圆激光驻波场作用下Cr原子发散角对沉积条纹特性的影响进行了模拟计算,比较了不同发散角条件下沉积条纹的对比度和半高宽. 关键词： 原子光刻 椭圆激光驻波场 Cr原子     

Research on Raman-scattering and Fabrication of Multilayer Thin Film with Different Structures and Components Based on Pt/Ti/Si3N4/SiO2/Si Substrate

选用三水醋酸铅、乙酰基丙酮酸锆、四异丙氧基钛、乙酰丙酮作初始材料,用同样的方法分别制备了锆钛酸铅(PZT)和钛酸铅(PT)两种固体前驱物. 采用改良型的溶胶-凝胶工艺技术,分别在不同的Pt-Ti-Si₃N₄-SiO₂-Si基底上,按照不同的组合方式,制备了三种多层薄膜：PZT、PT/PZT-PZT/PT、PT/PZT/-/PZT/PT. 较详细地讨论了薄膜制备的工艺技术,发现当凝胶通过烧结和干燥后变成固态物质时,薄膜内部存在着较大的残余应力,当薄膜在600 ºC下退火时其内部残余应力可以被减小. 通过拉曼     

可弯曲式有机电玫发光器件的出光率

基于几何光学模型及其原理,推导出在不同弯曲情况下可弯曲式有机电致发光器件的出光率表达式,分析了器件出光率受基板曲率、厚度及有机层折射率的影响,并与平整有机电致发光器件的出光情况作了比较.结果表明:当器件向外弯曲时,出光率随着基板曲率与基板厚度的增大而增大,随着有机层折射率的增大而减小;当器件向内弯曲时,出光率随着基板曲率与基板厚度的增大而减小,随着有机层折射率的增大而减小.对于平整器件,其出光率随有机层折射率的增大而减小.     

极紫外投影光刻物镜设计

极紫外投影光刻用14 nm波长的电磁辐射,可以在实现高分辨率的同时保持相对较大的焦深,有希望成为制造超大规模集成电路的下一代光刻技术.极紫外投影光刻工作于步进扫描方式,采用全反射、无遮拦、缩小的环形视场投影系统.无遮拦投影系统的初始结构设计困难且重要.介绍了一种近轴搜索方法,该方法引入了像方远心、物方准远心、固定放大率、Petzval条件和物像共轭关系等约束,通过计算确定第一面反射镜、最后一面反射镜、光阑所在反射镜的曲率,以及物距和像距.编写了近轴搜索程序,搜索出仞始结构.从初始结构出发,优化得到两套物镜,一套由四反射镜组成的系统,数值孔径0.1,像方视场26 mm× 1 mm,畸变10 nm,分辨率优于6000 cycle/mm.一套系统由六反射镜组成,数值孔径0.25,像方视场26 mm×1 mm,畸变3 nm,分辨率优于18000 cycle/mm.     

Coupling coefficients evaluation of a directional coupler using gain guided and index antiguided fibers

In this paper, we have investigated the mutual and self coupling characteristics of directional couplers using two individual gain guided and index antiguided fibers, which can deliver robust single mode operation with large mode area, respectively owing to the combined adequately large gain coefficients in the core; Some interesting and distinguishing properties from conventional index guided fiber couplers are obtained that: The variations of coupling coefficients are complex-valued and spatially damping oscillated, but not exponential-like decreasing as conventional index guided couplers.