A novel approach to carbon hollow spheres and vessels from CCl4 at low temperatures

Carbon hollow spheres (400-600 nm) and vessels (400 nm x 3000 nm) have been synthesized from sp3-CCl4 at 190 and 230 degrees C, respectively. The HRTEM images and Raman spectra reveal the sp2 nature of the as-obtained products, indicating that the transformation from carbon sp3 to sp2 occurs in the reactions. The possible mechanism has also been proposed.     

Investigation on relation between TL and OSL of Li2B4O7:Cu, In

Polycrystal Li₂B₄O₇ (LBO) doped with Cu and In was prepared and then sintered at different temperatures. X-ray diffraction (XRD) was applied to get the parameters of the LBO structure, thermoluminescence (TL) and optically stimulated luminescence (OSL) were measured, and a second-order exponential decay model was fitted to the OSL decay curves. The results indicate that the original number of OSL traps that have captured electroncs is linearly related with the sum of TL decay during the OSL process. Mean decay constant of OSL is related to the sintered temperature. The possible reason is that the sintered temperature affects the crystal sizes of the polycrystal, and consequently affects the stimulating lights’s intensity and the photoionization cross-section of the electrons, which have been captured by the traps. __________ Translated from Acta Scientiarum Naturalium Universitatis Sunyatseni, 2005, 44(4) (in Chinese)     

Novel preparation of organic polymer-based monolithic column by microwave irradation

Microwave irradiation was firstly attempted for the preparation of organic-based monoliths of poly（styrene-divinylbenzene- methacrylic acid）, which single step in situ polymerization was carried out during 15 min. The colunm permeability, electrophoretic and chromatographac behaviors were comparatively evaluated using pressure-assisted CEC, GEC and low pressure-driven separation modes. The largest theoretical plates for the preparing column could be close to 18,0000 plates/m for thiourea in the mode of p-CEC. It provided a viable alternative to traditional initiation means for the perparation of monolithic capillary columns.     

Well-defined star-shaped calcite crystals formed in agarose gels

Single crystals of calcite exhibiting a morphology of well-defined 8-armed stars, which evolved from original rhombohedral calcite crystals with their 8 points extending radially into eight arms, were produced by crystallization of CaCO3 in agarose gels.     

一种新的库仑微水滴定仪的设计方法

在传统微库仑滴定仪原理的基础上，利用８７５１单片机和微机，采用对电解电流时间调制的方法以及测量精度为准则判断滴定终点，从而大大地提高了仪器的测量精度和重复性。     

丹宁纤维素富集-氢化物发生ICP-AES同时测定水中痕量锗

研究了丹宁纤维素富集10~(-11)g/ml级锗的条件,并考察了地下水中36种共存离子对磷酸介质中氢化物发生ICP-AES测定锗的干扰和消除,应用于测定地下水中的超痕量锗,结果满意,检出限为15ng/L。     

242-260nm波长区CS2分子的多光子解离电离

在242－260nm波氏范围通过CS2分子的共振增强多光子电离（REMPI）获得了母体离子CS和碎片离子的分质量激发谱．在λ＜246.4nm区间，CS激发谱上呈现出来源于CS2双光子电离的弥散谱带,碎片离子激发谱的归属强烈提示多光子过程中有中性基电子态的CS和S（经由CS2的光解离）产生：（1）CS 的谱带主要来源于中性CS碎片经由单光子跃迁产生的（1＋1）共振增强电离，（2）除了部分S 的谱峰来自CS 的光解外，多数S 的锐谱峰来自中性S原子经由3p3（2D0）4p，3p3（4S0）np（n＝6，7，8）←3p43pJ（J＝2，1,0）双光子跃迁产生的（2＋1）共振增强电离．     

A mesoporous template route to the low-temperature preparation of efficient green light emitting Zn2SiO4:Mn phosphors

Green light emitting Zn2SiO4:Mn phosphors have been prepared via a low-temperature solid-state reaction using mesoporous silica SBA-15 template. This mesoporous silica template method features low-temperature formation of phosphors and easy doping. The structure and morphology of the phosphors were characterized by XRD, SEM, TEM, and N2 adsorption/desorption techniques, which confirmed the single crystallinity, ordered mesostructure, closed pore channels, and elongated ropelike morphology. The luminescent properties were examined by photoluminescence spectroscopy at room temperature, and the results of fluorescence decay time measurements show non-single-exponential decay behavior and a decrease of the decay time with an increase of the Mn concentration.     

Modeling of the relationship between electroosmotic flow and separation parameters in capillary zone electrophoresis using artificial neural networks and experimental design

The prediction of migration time of electroosmotic flow (EOF) marker was achieved by applying artificial neural networks (ANN) model based on principal component analysis (PCA) and standard normal distribution simulation to the input variables. The voltage of performance, the temperature in the capillary, the pH and the ionic strength of background electrolytes (BGE) were applied as the input variables to ANN. The range of the performance voltage studied was from 15 to 27 kV, and that of the temperature in the capillary was from 20 to 30 °C. For the pH values studied, the range was from 5.15 to 8.04. The range of the ionic strength investigated in this paper was from 0.040 to 0.097. The prediction abilities of ANN with different pre-processing procedure to the input variables were compared. Under the same performance conditions, the average prediction error of the migration time of the EOF marker was 5.46% with RSD = 1.76% according to 10 parallel runs of the optimized ANN structure by the proposed approach, and that of the 10 parallel predictions of the optimal ANN structure for the different performance conditions was 12.95% with RSD = 2.29% according to the proposed approach. The study showed that the proposed method could give better predicted results than other approaches discussed.