140GHz大功率交错双栅行波管的设计和模拟研究

采用交错双栅结构,结合带状电子注,研究了一种工作在140 GHz频段的大功率行波管. 本振模数值计算表明该结构具有良好的色散特性和耦合阻抗.针对所采用的慢波结构, 提出了慢波过渡结构、输入输出耦合器和集中衰减器,保证了行波管的良好工作. 利用三维大信号模拟计算的方法得到的结果显示,当电子注直流功率为5.115 kW,输入信号功率为0.1 W时, 所研究的行波管能在132-152 GHz范围内提供大于300 W的峰值功率,其中在138 GHz时得到最大功率546 W, 对应增益为37.37 dB.当在0.027-0.46 W内调节输入信号功率,可以保持该行波管在128-152 GHz 频带内得到大于440 W的峰值功率,对应的电子效率大于8.6%. 结果显示该行波管将在大功率短毫米波领域具有重要意义和潜在应用价值.     

高速摄影在流体动力学不稳定性研究中的应用

用高速摄影技术研究了高压气体膨胀驱动空气-水界面的瑞利-泰勒不稳定性,获得了空气-水界面的不稳定性清晰图像,得到气炮尖顶运动速度及湍流混合层高度增长速度与时间关系曲线。在横式激波管上用高速纹影诊断技术研究了激波作用空气-SF6界面的里克特迈耶-梅什科夫不稳定性,初步获得了实验图像,可清晰显示混合区变化过程。     

精确跟瞄控制技术研究

针对目标跟瞄多功能的需求,将最小方差估计和跟踪控制的思想结合,设计了一种跟瞄控制器,实现了目标位置预测与伺服控制的融合,优化了系统结构。采用基于当前统计模型的改进卡尔曼滤波算法,预测出目标运动状态参数;采用自适应滑模的解算控制方法,实现伺服系统的位置控制。通过仿真实验,系统状态稳定,抗干扰能力加强,通过对数据分析,跟瞄精度明显提高。     

W波段交错双栅返波振荡器高频系统

将矩形交错双栅结构作为慢波电路并提出与之配套的过渡结构和输出耦合器,设计了利用带状电子注工作在W波段的返波振荡器。提出的过渡结构和耦合器解决了该类直波导型器件的信号传输衰减大、反射强等难题。相对于传统圆形电子注器件,该器件得到了较大的功率提升。利用三维粒子模拟计算的方法,在电流12 mA时通过调节工作电压,在92~98 GHz频带内得到了数W的稳定平均功率输出,信号中心频率非常接近设计频率,且单色性好,谐波分量小。     

欠采样包裹相位图的展开算法

利用四种常见算法对由球面参考光像面数字全息显微术得到的中药饮片海金沙细胞的包裹相位图进行了相位解包裹。结果表明:基于离散余弦的最小二乘算法和预条件共轭梯度算法会使欠采样区域的误差进行传递,使得解包裹相位产生较大误差;质量图导向路径跟踪算法由于未识别残差点,导致出现拉线或者孤岛区域,而且处理速度很慢;基于横向剪切干涉的最小二乘算法处理欠采样包裹相位图的效果最好,而且处理速度较快。     

结合现代信息技术的大学物理设计性实验课程的研究与探索

文章以一个设计性实验课程设计为例,积极地融合现代信息技术,讨论如何结合现代信息技术的大学物理设计性及研究性实验课程,培养学生创新意识。     

Synergistic degradation of methyl orange in an ultrasound intensified photocatalytic reactor

An original ultrasound (US) directly intensified photocatalytic reactor was designed to degrade azo dye pollutant methyl orange (MeO) using Degussa TiO(2) as the photocatalyst. The sonolytic, photocatalytic and sonophotocatalytic degradation of MeO in the new reactor and the synergistic effect between sonolysis and photocatalysis were investigated. Effects of operation parameters i.e., US power, TiO(2) dosage, liquid circulation velocity and air flow rate on degradation efficiency were investigated and optimized. The results showed that all parameters have optimal values for the sonophotocatalytic degradation of MeO, and the optimum conditions for the new process are US power 600 W, TiO(2) dosage 3g/L, liquid circulation velocity 4.05×10(-2) m/s and air flow rate 0.2 L/min. Under the optimum conditions, 91.52% MeO had been degraded within 1h, and the combination of sonolysis and TiO(2) photocatalysis exhibited an obvious synergetic effect.     

Synthesis, crystal structure and biological activity of novel anthranilic diamide insecticide containing alkyl ether group

In searching for environmentally benign insecticides with high activity, low toxicity and low residue, two series of novel anthranilic diamide containing methyl ether and isopropyl ether group were designed and synthesized. All of the compounds were characterized by ¹H NMR spectroscopy, ¹³C NMR spectroscopy and elemental analysis. The single crystal structure of 19j was determined by X-ray diffraction. The insecticidal activities of the new compounds were evaluated. The results showed that some compounds exhibited excellent insecticidal activities against Lepidoptera pests. Among this series, compound, 18l showed 100?% larvicidal activity against Mythimna separate Walker, Plutella xylostella Linnaeus and Laphygma exigua Hubner at the test concentration, which was equal to the available chlorantraniliprole.     

The film thickness dependent thermal stability of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>:Ag thin films as high-temperature solar selective absorbers

The monolayer Al₂O₃:Ag thin films were prepared by magnetron sputtering. The microstructure and optical properties of thin film after annealing at 700 °C in air were characterized by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and spectrophotometer. It revealed that the particle shape, size, and distribution across the film were greatly changed before and after annealing. The surface plasmon resonance absorption and thermal stability of the film were found to be strongly dependent on the film thickness, which was believed to be associated with the evolution process of particle diffusion, agglomeration, and evaporation during annealing at high temperature. When the film thickness was smaller than 90 nm, the film SPR absorption can be attenuated until extinct with increasing annealing time due to the evaporation of Ag particles. While the film thickness was larger than 120 nm, the absorption can keep constant even after annealing for 64 h due to the agglomeration of Ag particles. On the base of film thickness results, the multilayer Al₂O₃:Ag solar selective thin films were prepared and the thermal stability test illustrated that the solar selectivity of multilayer films with absorbing layer thickness larger than 120 nm did not degrade after annealing at 500 °C for 70 h in air. It can be concluded that film thickness is an important factor to control the thermal stability of Al₂O₃:Ag thin films as high-temperature solar selective absorbers.     

Extracting the near surface stoichiometry of BiFe0.5Mn0.5O3 thin films; a finite element maximum entropy approach

The surface and near-surface chemical composition of BiFe_0.5Mn_0.5O₃ has been studied using a combination of low photon energy synchrotron photoemission spectroscopy, and a newly developed maximum entropy finite element model from which it is possible to extract the depth dependent chemical composition. In the uppermost few unit cells, an overabundance of Bi, and a deficiency of Fe and Mn are observed. In deeper layers, the measurements are consistent with bulk-like stoichiometry.Additionally, a definitive identification of all the observed species together with their abundance and depth dependence is given, and the mixed Fe and Mn valencies are estimated. In addition to the expected bulk valencies Mn^3 + and Fe^3 +, some Fe^2 + and a small amount of Mn^4 + are also observed. The maximum entropy finite element model demonstrated here is also discussed in more general terms and its potential application to the broader field of perovskite thin films is made apparent.