Hyperpolarized 129Xe NMR investigation of multifunctional organic/inorganic hybrid mesoporous silica materials

An extensive study has been made on a series of multifunctional mesoporous silica materials, prepared by introducing two different organoalkoxysilanes, namely 3-[2-(2-aminoethylamino)ethylamino]propyltrimethoxysilane (AEPTMS) and 3-cyanopropyltriethoxysilane (CPTES) during the base-catalyzed condensation of tetraethoxysilane (TEOS), using the variable-temperature (VT) hyperpolarized (HP) 129Xe NMR technique. VT HP-129Xe NMR chemical shift measurements of adsorbed xenon revealed that surface properties as well as functionality of these AEP/CP-functionalized microparticles (MP) could be controlled by varying the AEPTMS/CPTES ratio in the starting solution during synthesis. Additional chemical shift contribution due to Xe-moiety interactions was observed for monofunctional AEP-MP and CP-MP as well as for bifunctional AEP/CP-MP samples. In particular, unlike CP-MP that has a shorter organic backbone on the silica surface, the amino groups in the AEP chain tends to interact with the silanol groups on the silica surface causing backbone bending and hence formation of secondary pores in AEP-MP, as indicated by additional shoulder peak at lower field in the room-temperature 129Xe NMR spectrum. The exchange processes of xenon in different adsorption regions were also verified by 2D EXSY HP-129Xe NMR spectroscopy. It is also found that subsequent removal of functional moieties by calcination treatment tends to result in a more severe surface roughness on the pore walls in bifunctional samples compared to monofunctional ones. The effect of hydrophobicity/hydrophilicity of the organoalkoxysilanes on the formation, pore structure and surface property of these functionalized mesoporous silica materials are also discussed.     

A new class of aromatic polybenzoxazoles containing ortho-phenylenedioxy groups

A series of poly(o-hydroxy amide)s having both ether and ortho-catenated phenylene unit in the main chain were synthesized via the low-temperature solution polycondensation of 4,4^′-(1,2-phenylenedioxy)dibenzoyl chloride and 4,4^′-(4-tert-butyl-1,2-phenylenedioxy)dibenzoyl chloride with three bis(o-aminophenol)s including 4,4^′-diamino-3,3^′-dihydroxybiphenyl, 3,3^′-diamino-4,4^′-dihydroxybiphenyl, and 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane. The poly(o-hydroxy amide)s exhibited inherent viscosities in the range of 0.23-0.96 dl/g. Most of the poly(o-hydroxy amide)s were soluble in polar organic solvents such as N,N-dimethylacetamide (DMAc) and N-methyl-2-pyrrolidone (NMP) and could afford flexible and tough films by solution casting. Subsequent thermal cyclodehydration of the poly(o-hydroxy amide)s afforded polybenzoxazoles. However, the polybenzoxazoles were organic-insoluble except for those with the hexafluoroisopropylidene group. The polybenzoxazoles exhibited glass-transition temperatures (T_g) in the range of 200-232 °C by DSC and softening temperatures (T_s) of 250-256 °C by thermomechanical analysis. Thermogravimetric analyses indicated that most polybenzoxazoles were stable up to 500 °C in air or nitrogen. The 10% weight loss temperatures were recorded in the ranges of 546-606 °C in air and 574-631 °C in nitrogen.     

Micro-electrospray with stainless steel emitters

The physical processes underlying micro-electrospray (micro-ES) performance were investigated using a stainless steel (SS) emitter with a blunt tip. Sheathless micro-ES could be generated at a blunt SS tip without any tapering or sanding if ESI conditions were optimized. The Taylor cone was found to shrink around the inner diameter of the SS tubing, which permitted a low flow rate of 150 nL/min for sheathless microspray on the blunt tip (100 microm i.d. x 400 microm o.d.). It is believed that the wettability and/or hydrophobicity of SS tips are responsible for their micro-ES performance. The outlet orifice was further nipped to reduce the size of the spray cone and limit the flow rate to 50-150 nL/min, resulting in peptide detection down to attomole quantities consumed per spectrum. The SS emitter was also integrated into a polymethylmethacrylate microchip and demonstrated satisfactory performance in the analysis and identification of a myoglobin digest.     

Efficient resolution of racemic 1,1'-bi-2-naphthol with chiral selectors identified from a small library

Efficient resolution of racemic 1,1'-bi-2-naphthol, a well-studied analyte in chiral separation, was achieved using selectors developed from a small library. Separation factors (up to 7.2) obtained are significantly higher than the ones reported previously for this analyte. The library consists of 121 members and it does not contain the pi deficient 3,5-dinitrobenzoyl (Dnb) group. These highly efficient stationary phases may lead to the practical large-scale chromatographic resolution of enantiomers of 1,1'-bi-2-naphthol, which are widely used as chiral auxiliaries and ligands in asymmetric synthesis.     

Systems-based design of bi-ligand inhibitors of oxidoreductases: filling the chemical proteomic toolbox

Genomics-driven growth in the number of enzymes of unknown function has created a need for better strategies to characterize them. Since enzyme inhibitors have traditionally served this purpose, we present here an efficient systems-based inhibitor design strategy, enabled by bioinformatic and NMR structural developments. First, we parse the oxidoreductase gene family into structural subfamilies termed pharmacofamilies, which share pharmacophore features in their cofactor binding sites. Then we identify a ligand for this site and use NMR-based binding site mapping (NMR SOLVE) to determine where to extend a combinatorial library, such that diversity elements are directed into the adjacent substrate site. The cofactor mimic is reused in the library in a manner that parallels the reuse of cofactor domains in the oxidoreductase gene family. A library designed in this manner yielded specific inhibitors for multiple oxidoreductases.     

测定核黄素的化学发光新方法

研究了核黄素的化学发光性质，建立了一种测定核黄素的化学发光新方法，并应用于实际样品中核黄素的测定，与文献相比，本方法无需避光，而且分析体系和样品处理简单；干扰小，牛血清白蛋白、抗坏血酸、天冬氨酸等８种生物有机物质和 Ｃｕ（Ⅱ）、Ｚｎ（Ⅱ）、Ｆｅ（Ⅲ）等１５种常见金属离子的允许量较大；核黄素溶液浓度在０． １０～５０ ｍｇ／Ｌ范围内，与化学发光强度成正比，方法线性范围宽；测定１．０ｍｇ／Ｌ核黄素溶液１２次，求得相对标准偏差为２．９％，方法精密度高；方法的检测限为０．０７５ ｍｇ／Ｌ，灵敏度高。     

CH自由基与O2反应的从头算研究

采用量子化学从头算法（UMP2／6－31G**水平），从理论上研究了CH＋O2反应的两个主要通道.根据计算所得的反应诸途径（连接反应物Cn＋）及两个通道的最终产物）讨论了复杂的反应机理．发现反应过程涉及O2的第一激发态1△g，且沿反应途径有势能面相交，反应途径中包括多个中间体及过渡态．     

蔥与菲的激发等离子体质谱的分析和比较

蒽和菲是一对同分异构体,由于它们的结构都很稳定,所以在常规的电子轰击质谱中,它们的分子离子峰都很突出,两者的谱图没有明显的差异,不能成为一种鉴别手段.我们最近在自制的仪器上,记录了以近红外激光作用于这两个稠环芳香烃所产生的正负离子质谱,两者的谱图具有明显的不同,其中包含了较为丰富的结构信息,显示了这一研究手段的结构分析能力。     

Synthesis and structure of intramolecularly hydrogen bonded dendrons

[reaction: see text] A convenient synthesis of monodendrons whose conformation is restricted through the intervention of intramolecular hydrogen bonding and repulsive electrostatic interactions is described. X-ray crystal structure analysis of the second generation dendron shows the presence of a propeller-type secondary structure and indicates that the dendrons have assembled into a symmetrically interdigitated dimer in the solid state. 1H NMR and IR spectral data are in agreement with the presence of intramolecular hydrogen bonding between the amides and the pyridine N throughout the dendron structure in solution.     

四个酰基硫脲衍生物及其配合物的合成与表征

本文报道了四个Ｎ－酰基硫脲衍生物及其Ｃｕ＾２＋，Ｎｉ＾２＋，Ｃｄ＾２＋，Ｓｎ＾４＋配合物的合成。用质谱、红外光谱、紫外光谱对它们进行了结构、性质表征。配体与金属离子配位主要是通过硫原子进行，配合物都是非离子型的。