Computational Insights into Different Mechanisms for Ag-, Cu-, and Pd-Catalyzed Cyclopropanation of Alkenes and Sulfonyl Hydrazones

The [2+1] cycloaddition reaction of a metal carbene with an alkene can produce important cyclopropane products for synthetic intermediates, materials, and pharmaceutical applications. However, this reaction is often accompanied by side reactions, such as coupling and self-coupling, so that the yield of the cyclopropanation product of non-silver transition-metal carbenes and hindered alkenes is generally lower than 50 %. To solve this problem, the addition of a low concentration of diazo compound (decomposition of sulfonyl hydrazones) to alkenes catalyzed by either CuOAc or PdCl₂ was studied, but side reactions could still not be avoided. Interestingly, however, the yield of cyclopropanation products for such hindered alkenes were as high as 99 % with AgOTf as a catalyst. To explain this unexpected phenomenon, reaction pathways have been computed for four different catalysts by using DFT. By combining the results of these calculations with those obtained experimentally, it can be concluded that the efficiency of the silver catalyst is due to the barrierless concerted cycloaddition step and the kinetic inhibition of side reactions by a high concentration of alkene.     

Magnetic and Mössbauer studies of L10–FePt/Fe/Ta multilayer structures

Physics of the Solid State - Magnetic L10–FePt(10 nm)/Fe(t, nm)/Ta(2 nm) (t is the Fe film thickness that is varied from 0 to 15 nm) multilayer structures have been prepared by magnetron...     

Hybrid Particle–Continuum Simulations of Polymer Brushes in Shear Flow

A hybrid particle–continuum method is used to study the shear flow confined between two opposing walls, one of which is coated with polymer chains. Molecular dynamics (MD) is used in the particle region near the brush and Navier–Stokes (NS) equations are applied in the remaining region where the continuum assumption holds. The information exchange from the continuum region to the particle region is implemented using the constrained particle dynamics. Both Couette shear flow and oscillatory flow are considered in the present work. The effect of the shear flow on the conformational characteristics of polymer brushes is analyzed. In the overlap region, the velocities obtained from MD simulations are smoothly connected with those from NS equations. Our investigations demonstrate that the hybrid particle–continuum model is valid in exploring the shear behavior of polymer brushes.     

Multiplasmid DNA in agarose gel electrophoresis: Suitable dye and temperature is essential for prominent profiles

Nucleic acids dye Goldview is widely used in agarose gel electrophoresis (AGE). However, in this study, a sample of multiplasmid DNA (multi-pDNA) stained with Goldview analyzed by AGE showed its instability at low temperature. Three types of DNA samples were analyzed, including linear DNA (ladder), single-plasmid DNA (single-pDNA), and multi-pDNA, electrophoretic conditions were optimized by adjusting the dye, the buffer, and the temperature (1–50°C). The results showed that the light intensity of Gelred is 2.2-times higher than that of Goldview in staining multi-pDNA. Compared with the single-pDNA and the linear DNA, the multi-pDNA stained with Goldview was greatly affected by temperature. This short communication indicated that Gelred is a highly applicable dye for analyzing multiplasmid samples. The degree and the way of binding of Goldview to multi-pDNA are greatly affected by temperature.     

Utility of 2-Diphenylphosphoryloxy-1,3-Dienes in Multicomponent Hetero-Diels–Alder Reactions to Construct Functionalized Six-Membered Nitrogen Heterocycles

The utility of 2-diphenylphosphoryloxy-1,3-dienes for the construction of substituted six-membered nitrogen heterocycles is presented. These dienes undergo boron trifluoride-promoted aza-Diels–Alder reactions when reacted with imines or related species formed in situ using aldehydes and amine derivatives. The stability of the dienes allows this three-component reaction to be carried out with no special precautions to eliminate water or air. Thirty-one examples of this process are presented. The usefulness of the enol phosphate functional group is highlighted in further reactions after the cycloaddition step to generate functionalized piperidenes or pyridines.     

Atomic-Scale Dispersed Fe-Based Catalysts Confined on Nitrogen-Doped Graphene for Li-S Batteries: Polysulfides with Enhanced Conversion Efficiency

Lithium-sulfur batteries have been considered as potential electrochemical energy-storage devices owing to their satisfactory theoretical energy density. Nonetheless, the inferior conversion efficiency of polysulfides in essence leads to fast capacity decay during the discharge/charge cycle. In this work, it is successfully demonstrated that the conversion efficiency of lithium polysulfides is remarkably enhanced by employing a well-distributed atomic-scale Fe-based catalyst immobilized on nitrogen-doped graphene (Fe@NG) as a coating of separator in lithium-sulfur batteries. The quantitative electrocatalytic efficiency of the conversion of lithium polysulfides is determined through cyclic voltammetry. It is also proven that the Fe-N_X configuration with highly catalytic activity is quite beneficial for the conversion of lithium polysulfides. In addition, the adsorption and permeation experiments distinctly indicate that the strong anchoring effect, originated from the charge redistribution of N doping into the graphene matrix, inhibits the movement of lithium polysulfides. Thanks to these advantages, if the as-prepared Fe@NG catalyst is combined with polypropylene and applied as a separator (Fe@NG/PP) in Li-S batteries, a high initial capacity (1616 mA h g⁻¹ at 0.1 C), excellent capacity retention (93 % at 0.2 C, 70 % at 2 C), and superb rate performance (820 mA h g⁻¹ at 2 C) are achieved.     

非Hermitian正定线性方程组的外推的HSS迭代方法

为了高效地求解大型稀疏非Hermitian正定线性方程组，在白中治、Golub和Ng提出的Hermitian和反Hermitian分裂（HSS）迭代法的基础上，通过引入新的参数并结合迭代法的松弛技术，对HSS迭代方法进行加速，提出了一种新的外推的HSS迭代方法（EHSS），并研究了该方法的收敛性.数值例子表明：通过参数值的选择，新方法比HSS方法具有更快的收敛速度和更少的迭代次数，选择了合适的参数值后，可以提高HSS方法的收敛效率.     

Ion pair assisted micro matrix solid phase dispersion extraction of alkaloids from medical plant

A novel micro matrix solid phase dispersion method was successfully used for the extraction of quaternary alkaloids in Phellodendri chinensis cortex. The elution of target compounds was accomplished with sodium hexanesulfonate as the eluent solvent. A neutral ion pair was formed between ion-pairing reagent and positively charged alkaloids in this process, which was beneficial for selectively extraction of polar alkaloids. Several parameters were optimized and the optimal conditions were listed as follows: silica gel as the sorbent, silica to sample mass ratio of 1:1, the grinding time of 1 min. The exhaustive elution of targets was achieved by 200 µL methanol/water (9:1) containing 150 mM sodium hexane sulfonate at pH 4.5. The method validation covered linearity, recovery, precision of intraday and interday, limits of detection, limits of quantitation, and repeatability. This established method was rapid, simple, environmentally friendly, and highly sensitive.     

Top-down synthesis of polyoxometalate-like sub-nanometer molybdenum-oxo clusters as high-performance electrocatalysts

The top-down fabrication of catalytically active molecular metal oxide anions, or polyoxometalates, is virtually unexplored, although these materials offer unique possibilities, for catalysis, energy conversion and storage. Here, we report a novel top-down route, which enables the scalable synthesis and deposition of sub-nanometer molybdenum-oxo clusters on electrically conductive mesoporous carbon. The new approach uses a unique redox-cycling process to convert crystalline Mo^IVO₂ particles into sub-nanometer molecular molybdenum-oxo clusters with a nuclearity of ∼1–20. The resulting molybdenum-oxo cluster/carbon composite shows outstanding, stable electrocatalytic performance for the oxygen reduction reaction with catalyst characteristics comparable to those of commercial Pt/C. This new material design could give access to a new class of highly reactive polyoxometalate-like metal oxo clusters as high-performance, earth abundant (electro-)catalysts.

The top-down synthesis and deposition of polyoxometalate-like clusters on porous carbon is reported together with the high electrocatalytic oxygen reduction reactivity of the composite.     

“Self-repairing” nanoshell for cell protection

Self-repair is nature''s way of protecting living organisms. However, most single cells are inherently less capable of self-repairing, which greatly limits their wide applications. Here, we present a self-assembly approach to create a nanoshell around the cell surface using nanoporous biohybrid aggregates. The biohybrid shells present self-repairing behaviour, resulting in high activity and extended viability of the encapsulated cells (eukaryotic and prokaryotic cells) in harsh micro-environments, such as under UV radiation, natural toxin invasion, high-light radiation and abrupt pH-value changes. Furthermore, an interaction mechanism is proposed and studied, which is successful to guide design and synthesis of self-repairing biohybrid shells using different bioactive molecules.