水热微乳液法合成BaLiF3∶Er3+纳米微粒及表征

采用水/CTAB/正丁醇/正辛烷体系微乳液法及水热技术制备了BaLiF3∶Er3+纳米微粒.利用X射线衍射(XRD)、环境扫描电镜(ESEM)和红外荧光光谱等手段对所制备产物进行了表征.X射线衍射数据表明, 所制备微粒与JCPDS 标准卡片18-715吻合很好, 利用谢乐公式计算所制备产物平均粒径在98.45 nm左右, 与环境扫描电镜观察结果基本相同.BaLiF3∶Er3+纳米微粒的红外发射图谱由4个峰构成, 最强峰位于1540 nm处, 属于Er3+的f→f跃迁.     

聚醚氨酯薄膜表面性质的反相色谱法研究

本文报道了用反相色谱法研究多嵌段聚醚氨酯与几种低分子化合物的相互作用,测定了表征相互作用的热力学参数。结果表明,由ESCA证明表面软段富集的聚醚氨酯的反相色谱行为主要决定于富集层与探针分子的相互作用;苯及几种烷烃和聚醚氨酯的偏摩尔混合热和它的溶度参数与软段组分的溶度参数差值有关。     

Synthesis of Highly Porous Organic/Inorganic Hybrids by Ambient Pressure Sol-Gel Processing

This paper reports the synthesis of highly porous organic/inorganic hybrids by a two-step acid-base catalyzed sol-gel process and ambient pressure drying. In the method organic and inorganic precursors are copolymerized so as to incorporate organic ligands into the solid network. The two-step acid-base catalyzed process was used to prevent phase segregation during the hydrolysis and co-condensation of organic and inorganic precursors. The organic ligands incorporated into the solid gel network modify the surface chemistry. Thus, the wetting angle is significantly increased so that the collapse of the gel network is greatly reduced upon the removal of pore fluid during drying. Organic/inorganic hybrids with BET surface areas above 1250 m2/g, porosities above 75% and pore sizes of 8 nm have been synthesized.     

Study on the effects of fluorine and oxygen deficiency on YBa2Cu307 byab initio method

The calculations of clusters modeling the fluorine-doping and oxygen deficiency of YBa₂Cu₃0₇ have been performed by the method of all-electronab initio Hartree-Fock with self-consistent crystal field. Results show that in CuO planes electric charge significantly increases, the chemical valence of Cu decreases and the covalent bonding of Cu-O greatly weakens owing to oxygen deficiency, while the effect of F restores the local electronic structure of YBa₂Cu₃O₇. The reported opinion that F occupied the oxygen vacancy in Cu-O chains seems disputable according to the calculated bonding characteristics Project supported by the National Natural Science Foundation of China.     

共轭二烯烃的Ziegler─Natta催化聚合

共轭二烯烃的聚合是配位阴离子聚合，双金属配合物是聚合的活性中心，控制单体的构象是控制聚合物结构的关键。单体在低值配位场稳定化能（ＬＦＳＥ）过渡金属离子，如Ｃｏ~（２＋）、Ｔｉ~（３＋）上螯合，螯合单体具有顺式构象，所得聚合物具有顺１，４结构；在中等ＬＦＳＥ的过渡金属离子，如Ｖ~（３＋）、Ｃｒ~（３＋）上配位，配位单体具有反式构象，所得聚合物具有反１，４结构或是１，２聚合物；高ＬＦＳＥ值过渡金属离子不易控制活性价态，双金属配合物不够稳定，所得聚合物分子量常较低，结构规整性也常不够理想。     

RbEuI3和CsEuI3的合成及结构与性质研究

本文用一步法合成了新合物ＲｂＥｕＩ３与ＣｓＥｕＩ３，测定了化合物的组成，结构，熔点，密度，荧光光谱，极谱电位及磁矩，确定了化合物中Ｅｕ的价态为正二价。     

Total synthesis of (+)-aspidospermidine: a new strategy for the enantiospecific synthesis of aspidosperma alkaloids

A new strategy was developed for the enantiospecific synthesis of aspidosperma alkaloids. The key steps involve a novel ketene-lactonization reaction of a chiral vinyl sulfoxide to efficiently set up the quaternary carbon center, and a tandem Michael addition-alkylation reaction sequence to form the polycyclic core structure. This new strategy was employed in the total synthesis of natural product (+)-aspidospermidine.     

Intercalation assembly of kojic acid into Zn-Ti layered double hydroxide with antibacterial and whitening performances

The inhibitor of melanin and the bacteriostatic agent kojic acid was inserted into Zn-Ti layered double hydroxide (LDH) by anion-exchange reaction. The structure, slow release, antibacterial and skin whitening activity were studied.     

芳香叔胺引发丙烯腈光聚合研究

我们发现芳香叔胺是丙烯腈聚合极有效的光引发剂。芳香叔胺苯环上氢被正性基取代时,引发能力增加,被负性基取代时,引发能力下降。下列胺的活性次序是:N,N-二甲基对甲苯胺(DMT)>N,N-二羟乙基对甲苯胺(DHET)>N,N-二甲基苯胺(DMA)>N,N-二甲胺基苯甲醛(DMB)>N,N-二甲基对硝基苯胺(DNA)。芳香叔胺引发丙烯腈光聚合属自由基机构,聚合速度与叔胺浓度的0.66次方成正比。在叔胺浓度为10~(-2)—10~(-4)M范围内,聚合物平均聚合度的倒数与叔胺浓度的0.5次方成正比。初步认为在紫外光激发下,芳香叔胺与丙烯腈分子生成激发态电子转移络合物,再分解产生自由基,引发丙烯腈聚合。     

二乙基二硫代氨甲酸银体系流动注射法测定砷

本文设计了一种ＡｇＤＤＣ流动注射－分光光度法测定砷的系统。该系统采用自制的氢化物发生及吸装置，将液体流路和载气流路结合在一起。