Low-energy paths for the unimolecular decomposition of CH3OH: a G2M/statistical theory study

The potential energy surface (PES) of the CH3OH system has been characterized by ab initio molecular orbital theory calculations at the G2M level of theory. The mechanisms for the decomposition of CH3OH and the related bimolecular reactions, CH3 + OH and 1CH2 + H2O, have been elucidated. The rate constants for these processes have been calculated using variational RRKM theory and compared with available experimental data. The total decomposition rate constants of CH3OH at the high- and low-pressure limits can be represented by k infinity = 1.56 x 10(16) exp(-44,310/T) s-1 and kAr0 = 1.60 x 10(36) T-12.2 exp(-48,140/T) cm3 molecule-1 s-1, respectively, covering the temperature range 1000-3000 K, in reasonable agreement with the experimental values. Our results indicate that the product branching ratios are strongly pressure dependent, with the production of CH3 + OH and 1CH2 + H2O dominant under high (P > 10(3) Torr) and low (P < 1 atm) pressures, respectively. For the bimolecular reaction of CH3 and OH, the total rate constant and the yields of 1CH2 + H2O and H2 + HCOH at lower pressures (P < 5 Torr) could be reasonably accounted for by the theory. For the reaction of 1CH2 with H2O, both the yield of CH3 + OH and the total rate constant could also be satisfactorily predicted theoretically. The production of 3CH2 + H2O by the singlet to triplet surface crossing, predicted to occur at 4.3 kcal mol-1 above the H2C...OH2 van der Waals complex (which lies 82.7 kcal mol-1 above CH3OH), was neglected in our calculations.     

Influence of post-annealing temperature on properties of ZnO:Li thin films

Li-doped ZnO thin films were prepared on glass substrates by DC reactive magnetron sputtering. The influence of post-annealing temperature on the electrical, structural, and optical properties of the films was investigated. A conversion from p-type conduction to n-type in a range of temperature was confirmed by Hall measurement. The optimal p-type conduction is achieved at the annealing temperature of 500 °C with a resistivity of 57 Ω cm, carrier concentration of 1.07 × 10¹⁷ cm⁻³ and Hall mobility of 1.03 cm² V⁻¹ s⁻¹. From the temperature-dependent PL analysis, the energy level of Li_Zn acceptor was determined to be 140 meV above the valence band.     

聚N—异丙基丙烯酰胺溶液的温度依赖关系

用自由基聚合法合成了聚Ｎ－异丙基丙烯酰胺（ＰＮＩＰＡＡＭ）样品，用乌氏粘度计考查了该聚合物的四氢呋喃（ＴＨＦ）溶液和水溶液的粘度与温度的依赖关系。发现ＰＮＩＰＡＡＭ－ＴＨＦ体系的特性粘数随温度升高而增大，ＰＮＩＰＡＡＭ－Ｈ２Ｏ体系的特性粘数－温度曲线表现出较为复杂的变化规律。并用实验确定的特性粘数对合成样品的分子量进行了表征Ｍｎ＝８．４４×１０＾５ｇ·ｍｏｌ＾－１。     

Novel photopolymerizable biodegradable triblock polymers for tissue engineering scaffolds: synthesis and characterization

For use in micro-patterned scaffolds in tissue engineering, novel diacrylated triblock macromers (PLA-b-PCL-b-PLA, PGA-b-PCL-b-PGA and PCL-b-PEO-b-PCL) were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR) and gel permeation chromatography (GPC). All diacrylated polymers were designed as triblock copolymers and involved biodegradable blocks of relatively non-polar epsilon-caprolactone (CL) and polar monomers such as glycolide (GA), lactide (LA) or ethylene oxide (EO). All triblock polymers were prepared in molecular weights of a few kilo daltons via the anionic ring-opening polymerization (ROP) of the corresponding lactide, glycolide or caprolactone using stannous octoate [Sn(Oct)(2)] as catalyst. The polymers had low polydispersity indices, ranging from 1.23 to 1.56. Biodegradable polymeric networks were prepared with conversions of 72-84% via photopolymerization of the triblock diacrylated polymers with 2,2-dimethoxy-2-phenylacetophenone (DMPA) as photoinitiator. PLA-b-PCL-b-PLA copolymers crumbled easily and were not suitable for micro-patterning. PGA-b-PCL-b-PGA copolymers had higher water contact angles than PCL-b-PEO-b-PCL and were also cytocompatible with Fibroblasts 3T3.     

Unexpected formation of the novel fluorinated diazenes

Fluoroalkanesulfonyl azides reacted with morpholine giving unexpectedly N-fluoroalkanesulfonyl-N-morpholino diazenes, which were fully characterized by using spectral methods and X-ray diffraction analysis.     

Two types of intramolecular addition of an Al-N multiple-bonded monomer LAlNAr' arising from the reaction of LAl with N3Ar' (L = HC[(CMe)(NAr)]2, Ar' = 2,6-Ar2C6H3, Ar = 2,6-iPr2C6H3)

The reaction of beta-diketiminated aluminum(I) monomer LAl with a large bulky azide N3Ar' (L = HC(CMeNAr)2, Ar' = 2,6-Ar2C6H3, Ar = 2,6-iPr2C6H3) in the temperature range from -78 degrees C to room temperature affords two different isomers 2 and 3, which have been characterized by spectroscopic and X-ray structural analyses, as well as elemental analysis. The variable-temperature 1H NMR kinetic studies of this reaction indicate the existence of the monomer LAlNAr' (1) at low temperature and the thermal stability of the compounds increases in the order of 1 < 2 < 3.     

4‘,7—二甲氧基莰非醇的合成

Ｓｉｍｍｏｎｄｓ等报道异戊烯基化的查耳酮和黄烷酮对昆虫具有拒食活性［１］，Ｅｃｈｅｖｅｒｒｉ等发现，从植物Ｐａｓｓｉｆｌｏｒａｆｏｅｔｉｄａ树脂中分离到的４，７－二甲氧基莰非醇（１）在很低的浓度下（４０μｇ／ｇ）对昆虫Ｄｉｏｎｅｊｕｎｏ的幼虫也具有...     

SYNTHESIS, CHARACTERIZATION, METAL-UPTAKE BEHAVIOR OF BIS（BENZIMIDAZOLE） RESIN SUPPORTED ON EPOXIDE POLYMER

The new chelate resins, abbreviated as PNBMZs and PBBMZs based on epoxide polymer, were synthesized by polycondensation of N,N-diglycidyl-4-glycidyloxyaniline or 1,4-bis（2,3-epoxypropyl）benzene with the primary amine group of 1,3-bis（benzimidazol-2yl）propylamine （BBPAH）. The ion exchangers contain 2.71-3.23 mmol of the ligand contents per gram of the resin. Batch extraction capacities were determined for the metal chloride salts in buffer solutions in the pH range from -1 to 6.0. The chelate resins were very selective for Cu^2＋, Zn^2＋, Cd^2＋ in the presence of other divalent transition metal ions. The maximum uptake capacities of PNBMZ （synthetic molar ratio = 1：1.5） under non-competitive condition were found to be 0.94 mmol/g for Cu^2＋ at pH = 2, 1.3 mmol/g for Cd^2＋ at pH = 1 and 1.75 mmol/g for Zn^2＋ at pH = -1 respectively. While in the case of PBBMZ, it was 1.39 mmol/g for Cd〉 at pH = 1. The metal-uptake behaviors for both of them showed strong pH dependence, and their extraction capacities increase with decreasing pH. The uptake of Cu^2＋ by the resin PNBMZs at pH = 1 was found to be rather fast with t1/2 = 18 min. Metal-uptake experiments under competitive conditions also confirm that the chelate resins have a high selectivity for Cu^2＋, Zn^2＋, Cd^2＋ and the contrary pH dependence.     

利用高炉水淬渣制备(Ca/Y)-α-Sialon陶瓷的组织与性能

以高炉水淬渣合成的Ca-α-Sialon粉体为原料采用无压烧结技术制备了（Ca/Y）-α-Sialon陶瓷。通过用排水法、三点弯曲实验法、金相显微镜法、XRD法等手段研究了（Ca/Y）-α-Sialon陶瓷的烧结致密化过程、材料的力学性能、显微组织、相组成和材料的断裂特征。结果表明,适量的Y2O3促进材料的烧结致密化和提高材料的力学性能,但Y2O3过量（大于10%）时对材料的烧结和力学性能不利。掺杂Y^3＋的（Ca/Y）-α-Sialon呈柱状晶,随着Y2O3含量的增加和烧结温度的提高,（Ca/Y）-α-Sialon呈柱状晶出现粗化和等轴化。含10%Y2O3的材料在1700℃烧结时可获得较高的力学性能。     

The first example of enantioselective isocyanosilylation of meso epoxides with TMSCN catalyzed by novel chiral organogallium and indium complexes

The desymmetrization ring opening of meso epoxides using trimethylsilyl cyanide catalyzed by organogallium and indium complexes with binaphthol monoether derivatives as chiral ligands gave beta-isocyanohydrins with moderate to excellent enantioselectivities of up to 95% ee.