Chiral separation of N-(trans-4-isopropylcyclohexylcarbonyl)-D,L-phenylalanine isomers by high performance liquid chromatography

Summary A high-performance liquid chromatographic method was developed for the chiral separation of a new anti-diabetic agent, N-(trans-4-isopropylcyclohexylcarbonyl)-D-phenylalanine, and its L-enantiomer. The separation was performed on a Sumichiral OA-3300 column. Optimized mobile phase was 0.025 mol.L⁻¹ ammonium acetate in methanol solution. UV detection was at 210 nm. Baseline chiral separation was obtained within 12 minutes. The detection limits are 80 pg for the D-enantiomer and 120 pg for the L-enantiomer. RSD of the method was below 1% (n=5).     

Calculation of avoided crossings for highly excited Stark states of Rb

Using the method of diagonalization, in which zero-field wavefunctions from a potential model are chosen as a basis, we calculate positions and widths of anticrossings for highly excited Stark states of Rb with principal quantum number n up to 49. We obtain the theoretical positions and widths in good agreement with available experimental values, and we present scaling laws of the field positions and widths of anticrossings that can be used to provide information for future experiments.     

Multinuclear NMR study of lanthanide(III) complexes of 1,2-PDTA in aqueous solution

The complexation of lanthanide(III) cations with 1,2-propanediaminetetraacetate (1,2-PDTA) in aqueous solution has been investigated by ¹⁰Na, ³⁵Cl, ²H and ¹¹O NMR shift measurements. It has been shown that the contact shifts are dominant for ¹⁷O, ¹⁶Cl and ²H (only for the heavier lanthanide series) and the pseudocontact shifts are dominant for ²⁵Na. It is suggested that the 1,2-PDTA ligand is bound pentadentately via the two nitrogens and the three carboxylates for the lighter lanthanide complexes, hexdentately via the two nitrogens and the four carboxylates for the heavier ones. The numbers of the water coordinated were determined. The small amount of chloride anion in inner coordination sphere was observed.     

氯过氧化物酶的手性催化活性在有机合成中的应用

氯过氧化物酶（CPO）作为过氧化物酶家族中的一员对多种有机底物表现出了广泛的催化活性。自上世纪60年代被发现以来，CPO在有机合成中的应用一直是一个研究热点。它作为一种生物催化剂能催化广泛的底物合成手性化合物，且有高的产率和高的对映选择率。本文综述了氯过氧化物酶在手性有机合成中的应用，重点关注了卤化、醇氧化、羟基化、环氧化、磺化氧化等反应，并讨论了目前在该领域所面临的问题及今后的发展趋势。     

Novel Phenomenon of Oxygen-to-oxygen Silyl Migration in Directed Aldol Reaction

The phenomenon of migration of the silyl groups from α-oxygen to β-oxygen in sodium aldol reaction was observed for the first time in this paper.     

Photoinduced deformation of amphiphilic azo polymer colloidal spheres

Photoinduced shape deformation of colloidal spheres made of an amphiphilic azo polymer has been demonstrated in this work. The polymer contains the donor-and-acceptor-type azobenzene chromophores and can form uniform colloidal spheres by dropwise adding water into its THF solution. When the colloidal spheres obtained were exposed to the interfering p-polarized Ar+ laser beams (150 mW/cm2), the colloidal spheres changed to prolates (i.e., "rugby-balls"), "spindles", and finally "rods", depending on the irradiation times. The elongated direction of the spheres was observed to be the same as the polarization direction of the laser beam. The average major-to-minor ratio of the ellipsoids could be easily adjusted by controlling the irradiation time. The deformation effect observed in this work can offer a new way to prepare nonspherical colloids from colloidal spheres and will shed new light on the correlation between the photodriven shape deformation and photoinduced surface relief gratings for the same type of polymers.     

Aggregate manganese Schiff base moieties by terephthalate or acetate: dinuclear manganese and trinuclear mixed metal Mn2/Na complexes

A reaction system consisting of terephthalic acid, NaOH, inorganic Mn(II) or Mn(III) salt, and salicylidene alkylimine resulted in dinuclear manganese complexes (salpn)(2)Mn(2)(mu-phth)(CH(3)OH)(2) (1, salpn = N,N'-1,3-propylene-bis(salicylideneiminato); phth = terephthalate dianion), (salen)(2)Mn(2)(mu-phth)(CH(3)OH)(2) (2, salen = N,N'-ethylene-bis(salicylideneiminato)), (salen)(2)Mn(2)(mu-phth)(CH(3)OH)(H(2)O) (3), and (salen)(2)Mn(2)(mu-phth) (4), while the absence of NaOH in the reaction led to a mononuclear Mn complex (salph)Mn(CH(3)OH)(NO(3)) (5, salph = N,N'-1,2-phenylene-bis(salicylideneiminato)). In addition, a trinuclear mixed metal complex H[Mn(2)Na(salpn)(2)(mu-OAc)(2)(H(2)O)(2)](OAc)(2) (6) was obtained from the reaction system by using maleic acid instead of terephthalic acid. Five-coordinate Mn ions were found in 4 giving rise to an intermolecular interaction and constructing a one-dimensional linear structure. Antiferromagnetic exchange interactions were observed for 1-3, and a total ferromagnetic exchange of 4 was considered to stem from intermolecular magnetic coupling. (1)H NMR signals of phenolate ring and alkylene (or phenylene) backbone of the diamine are similar to those reported in the literature, and the phth protons are at -2.3 to -10.1 ppm. Studies on structure, bond valence sum analysis, and magnetic properties indicate the oxidation states of the Mn ions in 6 to be +3, which are also indicated by ESR spectra in dual mode. Ferromagnetic exchange interaction between the Mn(III) sites was observed with J = 1.74 cm(-1). A quasireversible redox pair at -0.29V/-0.12V has been assigned to the redox of Mn(2)(III)/Mn(III)Mn(II), implying the intactness of the complex backbone in solution.     

Diastereoselective allylation of planar chiral substituted ferrocenecarboxaldehyde: an efficient entry to chiral ferrocenyl ligands

2,2′-Disubstituted ferrocenecarboxaldehydes are subjected to zinc-mediated allylation to form homoallylic ferrocenyl alcohols. The effects of ortho-substituted functional groups on facial selectivities of planar chiral aldehydes were studied and it was found that the corresponding homoallylic alcohols were obtained as single diastereomers in excellent yields.     

Effect of actin concentration on the structure of actin-containing liposomes

Liposomes encapsulating monomeric actin (G-actin) were produced via extrusion through 400 and 600 nm pore diameter polycarbonate membranes in low ionic strength buffer (G-buffer). After actin-containing liposomes were subjected to high ionic strength polymerization buffer (F-buffer), morphological changes in the structure of actin-containing liposomes were studied using asymmetric flow field-flow fractionation (AFFF) coupled with multiangle static light scattering (MASLS). The general shape of these liposomes was initially determined by fitting three form factors, which describe the angular distribution of scattered light from a spherical thin shell, thin disk, and thin rod, to the experimentally measured light scattering spectra to regress the dimensions of the liposomes corresponding to the proposed geometry. Light scattering spectra that yielded a best fit to the thin disk model were analyzed further and fit to the ellipsoidal of revolution form factor to regress both the major and minor axis dimensions. The results of this analysis showed that actin-containing liposomes extruded through 400 and 600 nm pore diameter membranes in F-buffer, at a low actin concentration (0.1 mg/mL), assumed a spherical shape, which is also the case for plain liposomes (no actin present) in G-buffer and F-buffer. When the actin concentration was increased to 1 mg/mL, the polymerizing actin filaments stretched the initially spherical liposome into a disklike shape. However, when the actin concentration was further increased to 5 mg/mL, the liposomes reverted back to a spherical shape.     

Melting behavior of one-dimensional zirconium nanowire

In this paper, we analyze the melting behavior of zirconium nanowire using the results of a series of molecular dynamics simulations. Our calculation employs a well-fitted, tight-binding many-body potential for zirconium atoms. The melting point of the nanowire is predicted by the root-mean-square displacements for inner and outer shells. Our simulations predict two melting behaviors: one is the inner melting and the other is the outer melting. Our results reveal that the melting of nanowire starts from the inner shell atoms. The melting point of zirconium nanowire is lower than the bulk value (2125 K). Moreover, the melting point of the inner shell is lower than that of the outer shell. A coexistence of crystal and liquid units is observed in the melting process of nanowire. An investigation of local clusters is carried out to further analyze the melting mechanism of the nanowire. The presence of the local clusters 1331, 1321, 1211, etc. is an indication of disordered structures. The pair and angular correlation functions are also presented for the analysis of the melting behavior. It is not only the diffusion of single atom but the diffusion of clusters result in the occurrence of the melting.