Discriminant Analysis of the Nutritional Components between Organic Eggs and Conventional Eggs: A 1H NMR-Based Metabolomics Study

The difference of nutrient composition between organic eggs and conventional eggs has always been a concern of people. In this study, ¹H nuclear magnetic resonance (NMR) technique combined with multivariate statistical analyses was conducted to identify the metabolite different in egg yolk and egg white in order to reveal the nutritional components information between organic and conventional eggs. The results showed that the nutrient content and composition characteristics were different between organic and conventional eggs, among which the content of glucose, putrescine, amino acids and their derivatives were found higher in the organic eggs yolk, while phospholipids were demonstrated higher in conventional eggs yolk. Organic acid, alcohol, amine, choline and amino acids were higher in conventional eggs white, but glucose and lactate in organic egg were higher. Our study demonstrated that there are more nutritive components and higher nutritional value in organic eggs than conventional eggs, especially for the growth and development of infants and young children, and conventional eggs have more advantages in promoting lipid metabolism, preventing fatty liver, and reducing serum cholesterol. Eggs have important nutritional value to human body, and these two kinds of eggs can be selected according to the actual nutrient needs.     

碳纳米锥吸附Na的第一性原理计算

本文采用第一性原理计算结合从头算分子动力学的方法,研究了碳纳米锥(CNC)、B和N掺杂碳纳米锥(B-CNC和N-CNC)的稳定性,结果表明CNC、B-CNC和N-CNC均可以稳定存在.在此基础上分别研究了Na原子在CNC、B-CNC和N-CNC上的吸附行为.结果表明：1) Na原子在CNC五元碳环中心顶部位置的吸附最强,吸附能为-2.52 eV. CNC的能隙(Eg)为1.96 eV. 2) B和N掺杂CNC后,B-CNC和N-CNC的导电性均显著增强. 3)与CNC相比,Na原子在B-CNC上的吸附增强,而在N-CNC上的吸附则显著减弱.这表明B-CNC有望作为Na离子电池的负极材料.本文的研究结果对以CNC为负极材料的Na离子电池的研究提供了理论指导.     

一种新的基于频域有限差分方法的小周期有机太阳能电池的光电特性

由MoO₃/Ag/MoO₃ （MAM）组成的多层膜结构非常有希望替代ITO作为有机太阳能电池中的透明阳极.然而,基于MAM结构的有机太阳能电池光吸收能力较弱.为此,引入了一种小周期短节距金属光栅,利用表面等离子激元增强活性层的光吸收.借助于频域有限差分方法求解麦克斯韦方程和半导体方程,探讨了有机太阳能电池结构的光学和电学性质.分析结果表明：与平面结构相比,活性层中的光吸收大大提高;同时,当凹槽宽度为4 nm,能量转换效率提高了49%.相关结果有助于更好地开发和利用无ITO层的有机太阳能电池.     

Vertical assembly of carbon nanotubes for via interconnects

The via interconnects are key components in ultra-large scale integrated circuits(ULSI).This paper deals with a new method to create single-walled carbon nanotubes(SWNTs) via interconnects using alternating dielectrophoresis(DEP).Carbon nanotubes are vertically assembled in the microscale via-holes successfully at room temperature under ambient condition.The electrical evaluation of the SWNT vias reveals that our DEP assembly technique is highly reliable and the success rate of assembly can be as high as 90%.We also propose and test possible approaches to reducing the contact resistance between CNT vias and metal electrodes.     

Defect-induced failure of optical coating filters

Optical filters composed of Ag, Al₂O₃, and ZnSe films were prepared on BK7 substrates by evaporation. By employing spectrophotometer, microscope, scanning electron microscope (SEM), and energy dispersive spectrum (EDS) analysis, the moisture-dependent stability of the samples was tested. The experimental results revealed that filter failure often occurs initially at defect sites. Small sputtering particles and pinhole are found to be two types of defects that induced the optical coating filter failure. The mechanisms of the defect-induced failure of the filters also are discussed in the article.     

微细管碳纳米管悬浮液强制对流换热实验研究

测量了水平微细圆管内蒸馏水和不同质量浓度的水基多壁碳纳米管纳米流体在低雷诺数下的强制对流换热特性。实验结果表明,与蒸馏水相比,纳米流体的对流换热系数显著提高,且随质量浓度和管内雷诺数的增大而增大;并且研究了流体管内流动阻力特性,得到的泊肃叶数f·Re值随着雷诺数的变化不明显,但纳米流体的f·Re值要明显小于纯水。     

H+CH→H2+C（1D）反应的立体动力学研究

利用从头计算的对称性为1A′的势能面,用准经典轨线（QCT）方法在不同的碰撞能下研究了反应H+CH→H₂+C（¹D）的产物和反应物的矢量相关性质.在质心系下计算了四个极化微分反应截面.计算并讨论了描述k和j′夹角分布关系的P（θ_r）和描述k-k′-j′三者的二面角分布关系的P（（?）_r）.计算结果表明势能面上的深势阱和不同的碰撞能对产物分子H₂有重要影响.     

高速传输系统CAD/CAM齿形误差最优化算法

本文提出了一种CAD/CAM齿形误差的最优化算法。本算法收敛速度快、拟合误差小,能够按照预定设计要求对齿形精度加以控制,实现最优化自动搜索,同时给出数值计算结果。     

一种大功率窄脉冲半导体激光器测试台的研制

大功率窄脉冲半导体激光器主要光电性能参数为:输出峰值光功率、阈值电流、正向电压、上升时间、峰值波长、光谱半宽、半强度角.根据激光制导系统对大功率窄脉冲激光器参数的特殊测试要求,研制一种大功率窄脉冲激光器测试平台,将小型化大功率激励器功放模块、大范围可调DC-DC模块、信号源板、激光器座、光学准直镜集成在一个平台上,与峰值功率计、光谱仪、CCD摄像机等仪器配合,可测出大功率窄脉冲激光器的峰值功率、峰值波长及波长随温度变化的漂移特性、发光芯均匀性等参数.介绍了大功率窄脉冲激光器测试台的特点,并对测试结果作了论述.