Stretchable Perovskite Solar Cells with Recoverable Performance

Perovskite solar cells (PSCs) are a promising photovoltaic technology for stretchable applications because of their flexible, light‐weight, and low‐cost characteristics. However, the fragility of crystals and poor crystallinity of perovskite on stretchable substrates results in performance loss. In fact, grain boundary defects are the “Achilles’ heel” of optoelectronic and mechanical stability. We incorporate a self‐healing polyurethane (s‐PU) with dynamic oxime–carbamate bonds as a scaffold into the perovskite films, which simultaneously enhances crystallinity and passivates the grain boundary of the perovskite films. The stretchable PSCs with s‐PU deliver a stabilized efficiency of 19.15 % with negligible hysteresis, which is comparable to the performance on rigid substrates. The PSCs can maintain over 90 % of their initial efficiency after 3000 hours in air because of their self‐encapsulating structure. Importantly, the self‐healing function of the s‐PU scaffold was verified in situ. The s‐PU can release mechanical stress and repair cracks at the grain boundary on multiple levels. The devices recover 88 % of their original efficiency after 1000 cycles at 20 % stretch. We believe that this ingenious growth strategy for crystalline semiconductors will facilitate development of flexible and stretchable electronics.     

台风过境下大型单桩式海上风机结构动力特性研究

风机大型化是我国海上风电技术发展的重要方向. 东南沿海是我国海上风电发展的重要基地, 这一区域频繁发生的台风对海上风机的影响不可忽略. 台风风场与常规大风风场有不同的湍流特性, 同时台风期间较高的风速会引起巨大的台风浪. 本文考虑台风经过期间独特的风场及波浪场, 开展风浪联合作用对大型单桩海上风机影响的研究. 基于DTU 10 MW大型单桩风机, 运用一体化分析软件SIMA建立风浪联合作用下大型单桩风机的耦合数值模型, 研究台风经过不同阶段大型风力机的动力响应特性. 计算结果显示, 叶片变桨能有效降低台风经过时风机叶片所受风载荷, 变桨状态下单桩风机所受风载荷主要来源于塔筒. 在台风经过的不同阶段, 大型单桩海上风机结构表现出不同的动力特性. 台风全过程塔筒运动均受波浪激发一阶频率控制, 塔基上方结构动力载荷以惯性载荷为主, FOVS至FEWS阶段及BOVS阶段至BEWS阶段塔筒运动一阶频率处响应能量增长较小, 响应能量向低频及波频转移. 塔基下方泥面线处剪力响应受波频控制, 弯矩响应受一阶频率控制.      

片段化森林中檵木幼苗种内叶经济性状变异及其驱动因子

在异质性生境中,种内功能性状变异有助于植物对环境的适应,进而影响种群更新、群落构建和生态系统过程。探讨了种内叶经济性状的变异及受生境异质性的塑造情况。以千岛湖片段化生境中的常见种檵木（Loropetalum chinense）的幼苗为研究对象,测定了200株檵木幼苗个体水平的7个叶经济性状（比叶面积SLA、叶全碳量C、叶全氮量N等）及其对应的生境因子（郁闭度、土壤全碳量、土壤全氮量等）,采用相关性检验、主成分分析和线性混合效应模型等方法探讨片段化森林中檵木幼苗的种内叶经济性状变异及生境异质性对该变异的驱动作用。结果显示：（1） 在7个叶经济性状所构成的21对相关性分析中,有12对显著相关。经主成分分析降维后,主成分1（PC1）占性状总变异的43.02%,主要与比叶面积、叶绿素浓度、叶全氮量呈正相关,与叶干物质质量分数和叶碳氮比呈负相关,体现了檵木的种内叶经济谱,可反映叶片的最大光合效率。（2）片段化对生境条件和叶经济性状均有影响。岛屿森林群落的郁闭度显著低于大陆。相对于大陆,岛屿中的檵木幼苗趋向于更小的PC1值（缓慢投资-收益策略）;大岛边缘较大岛内部偏向于更小的PC1值。（3）生境因子中,郁闭度对PC1具有显著正效应。研究表明,片段化生境中的檵木在幼苗阶段存在叶经济谱,生境片段化可通过影响生境条件进而改变檵木幼苗的叶经济性状。随着生境片段化程度的加剧,檵木幼苗的叶经济性状逐渐向缓慢投资-收益策略靠拢。     

多孔氧化铝模板催化制备定向碳纳米管阵列

Well-aligned open-ended multi-walled carbon nanotube (MWCNT) arrays were prepared via chemical vapor deposition (CVD) method in porous anodic aluminum oxide (AAO) templates without depositing any transition metals as catalyst. Effects of the CVD temperature and heat treatment were studied in detail.Well-aligned open-ended MWCNT arrays were obtained at the CVD temperature above 600 ℃; when CVD temperature is reduced to around 550 ℃, CNTs, CNFs and other structures existed at the same time; no CNTs or carbon nanofibres (CNFs) could be found as the CVD temperature is below 500 ℃, and only amorphous carbon in the porous AAO template was found. Experimental results showed that the AAO template is catalytic during the CVD process, and it has the following two effects: to catalyze thermal decomposition of acetylene and to catalyze conversion of carbon decomposed from acetylene into CNTs or CNFs. Heat treatment could improve the graphitization degree, but it might also introduce new defects.     

聚酯废弃物改性植物油沥青粘结剂的红外研究

采用蒸馏厂的下脚料——各种植物油沥青(棉油沥青、豆油沥青、混合油沥青)为主要原料,用聚酯废弃物为改性剂,经裂解、酯化等工艺制备成三种铸造用植物油沥青粘结剂(MB)。同时采用红外光谱和热重分析等手段对该三种粘结剂的基团结构,性能与固化机理进行探索,并与合脂粘结剂比较。 结果表明：改性粘结剂的主要成分与合脂粘结剂大致相同,且具有更高的干拉强度、更慢的发气速度等优异性能,达到甚至超过合脂粘结剂的性能,可用于Ⅰ级型芯砂的粘结,而且成本低廉。     

新型显微成像光谱仪系统中线阵针孔离焦研究

显微成像光谱仪技术是最近新兴的一种生物组织检测方法,它可以广泛应用在生物医学检测,疑难病症分析、预防、诊断中,已经成为当今生物组织检测领域研究的热点。提出了一种新型的基于线阵针孔阵列的激光扫描共焦显微成像光谱仪系统LP-LSCMIS方案,介绍了其工作原理及优点,讨论了该装置中线阵针孔阵列离焦对系统性能的影响,分析了离焦对生物组织荧光图像的光谱分辨和自体荧光光谱的调制深度的影响。推导出了光谱分辨和调制深度与离焦量的关系式。结果表明,离焦对仪器的性能有较大的影响,因此在装置装调时要求有更高精度的调整机构。     

Output feedback regulation of time-delay nonlinear systems with unknown continuous output function and unknown growth rate

Nonlinear Dynamics - This paper is concerned with the global regulation via output feedback for the time-delay nonlinear systems with unknown continuous output function and unknown growth rate....     

Rotational and rovibrational transitions in the a 1Δ2 and b 1Σ+0+ states of sulfur monoxide radical

ABSTRACT

Sulfur monoxide radical has widely been detected in outer space using ground-state spectroscopy. The a ¹Δ₂ and b ¹Σ⁺₀₊ states of this radical have low excitation energies, and they possibly exist in outer space. In this work, the potential energy curves and dipole moment functions of the two states were evaluated using the complete active space self- consistent field method, followed by the valence internally contracted multireference configuration interaction approach. The transition line positions, oscillator strengths, band transition dipole matrix elements, Einstein A coefficients, and Franck–Condon factors of all transitions were calculated for lower vibrational levels at rotational angular momentum quantum number J up to 150. The transition line positions calculated in this study are in good agreement with the experimental results. The rovibrational transition became noticeably weak at Δυ > 5. Comparing the results of a ¹Δ₂ and b ¹Σ⁺₀₊ states reported in this paper with the previous values, we conclude that these results are the most accurate and complete to date.     

QUANTIFICATION OF SHEAR DAMAGE EVOLUTION IN ALUMINIUM ALLOY 2024T3

Shear damage may occur in the process of metal machining such as blanking and cutting, where localized shear deformation is developed. Experimental findings indicate that microscopic shear damage evolution in aluminium alloy 2024T3 (A1 2024T3) is a multi-stage mechanism, including particle cracking, micro-shear banding, matrix microcracking and coalescence of microcracks. This study is an attempt to use a set of equations to describe the multi-stage shear damage evolution in Al 2024T3. The shear damage variables in terms of multi-couple parameters of a power-law hardening material have been defined. An evolution curve of shearing damage has been calculated from experimental data. The values of the shear damage variable at different stages of damage have also been calculated. By making use of the findings, the relation between the microscopic shear damage evolution and the macroscopic shear response of the material has been discussed.     

Development of a Genus-Universal Nucleotide Signature for the Identification and Supervision of Ephedra-Containing Products

Ephedra plants generally contain ephedrine alkaloids, which are the critical precursor compounds of methamphetamine (METH). METH could cause serious physical and mental damage, and therefore Ephedra materials are strictly in supervision internationally. However, unlawful utilization of Ephedra herbs and its products still exist. Thus, it is imperative to establish a universal method for monitoring Ephedra ingredients in complex mixtures and processed products. In this study, 224 ITS2 sequences representing 59 taxa within Ephedra were collected, and a 23-bp genus-level nucleotide signature (GTCCGGTCCGCCTCGGCGGTGCG) was developed for the identification of the whole genus. The specific primers MH-1F/1R were designed, and 125 individuals of twelve Ephedra species/varieties were gathered for applicability verification of the nucleotide signature. Additionally, seven batches of Chinese patent medicines containing Ephedra herbs were used to test the application of the nucleotide signature in complex and highly processed materials. The results demonstrated that the 23-bp molecular marker was unique to Ephedra and conserved within the genus. It can be successfully utilized for the detection of Ephedra components in complex preparations and processed products with severe DNA degradation. The method developed in this study could undoubtedly serve as a strong support for the supervision of illegal circulation of Ephedra-containing products.