Teleportation of three-dimensional single particle state in noninertial frames

Considering the spin degree of freedom of the Dirac field, we study the entanglement behavior of a different class of communication channel and teleportation of three-dimensional single particle state in noninertial frames. Numerical analysis shows that the communication channel in our scheme can offer enough distillable entanglement for the teleportation protocol. Moreover, the teleportation protocol could work well if Rob＇s acceleration is not very big, but the fidelity of the teleportation is still reduced due to the Unruh effect.     

激光诱导击穿光谱脉冲激光功率锁定的研究

激光诱导击穿光谱(laser-induced breakdown spectroscopy,LIBS)在煤质在线监测方面展现了突出的应用前景和研究价值。针对该技术在实际应用中会由于脉冲激光功率起伏导致的长期测量稳定性差的问题,建立了闭环负反馈式脉冲激光功率锁定装置,采用激光功率负反馈信号控制和锁定Nd∶YAG激光器输出功率。实验研究了不同分光比例脉冲激光器锁定在设定输出功率,同一分光比例激光器锁定在不同输出功率以及长时间运行时的功率锁定。结果表明,不同的分光比例对激光输出功率的锁定效果影响不大,分光比例越小,稳定速度越快;同一分光比例实现激光脉冲功率不同预设值的锁定以及在长时间运行时,采用此装置进行功率锁定后,激光输出功率处于预设区间内,RSD值由自由运行时的2.4%降低至1.1%。     

基于机器视觉的布匹瑕疵在线检测

为实现图案布匹瑕疵在编织过程中的实时检测,提出一种通过区域差影自动分割瑕疵区域的检测方法。通过求取水平和竖直两方向距离叠加函数极值,并对极值做权重分析,精确求取纹理基元周期;根据所求纹理基元周期确定区域差影的区域大小,并对区域差影图像求取梯度,再进行标记分水岭分割,能够快速准确地分割出纹理瑕疵区域。实验结果表明:该算法能够准确地检测出纹理布匹瑕疵的位置,检测一帧用时200 ms,准确率均达98%以上,实时性强,检测精度高,满足工业现场要求。     

Quantum-correlated photon pair generation in tellurite microstructured optical fibers

We theoretically investigated the generation of quantum-correlated photon pair through spontaneous four-wave mixing in tellurite microstructured optical fiber (MOF). We evaluated the performance of photon pair generation in tellurite fibers based on Raman gain coefficient spectra. It was shown that the TBSN16P6W tellurite fiber provided a low Raman noise on correlation photon generation over a wide pump-idler detuning range. We can choose proper tellurite composition to obtain a low Raman gain window over wide range for correlated photon pair generation. We also designed the tellurite MOF structure to obtain a small dispersion value with high nonlinear coefficient at telecommunication wavelengths, thus realize efficient quantum-correlated photon pair generation.     

多组全动型变焦系统新型设计

为了寻找简单的多组全动型变焦系统的解算方法及降低全动型变焦距系统设计时对经验的过分依赖,提出了一种全新的方法来计算系统组元的光焦度分配。以组元之间的间隔为初始量,把组元的运动形式作为自由量,通过计算公式求出满足间隔要求的光焦度分配和组元运动形式。该方法在一定程度上降低了变焦系统光焦度分配的难度,更重要的是,为探寻新的变焦运动方式提供了一种新的思路。在得到系统的光焦度分配之后又推导出一种求解系统组元移动曲线的简单方法。为了验证该方法的可行性,设计了一个四组式全动型变焦系统。所设计系统优化后的光焦度分配值和计算的结果都很接近,并且得到了组元的移动曲线,从而验证了该方法的正确性。     

Spin frustration-related behavior of mixed spin diamond chain

The magnetization of mixed spin-1/2, 1 Ising diamond chain with antiferromagnetic spin exchange interaction has been investigated by using the Monte Carlo simulation. Magnetization behaviors with different antiferromagnetic interactions are simulated under magnetic field at low temperature. The behaviors are studied in two different cases. In one case the absolute value of the interaction between two spin-1/2 atoms is the largest and in the other case it is not the largest. Multiple plateaus of magnetization M, such as plateaus at M=±1, M=0 and M=±0.566 are obtained. The plateaus at M=±0.566 correspond to two metastable states. The M=0 plateau may disappear at some specific values of spin exchange interactions. The spin configurations were checked when the plateaus appear. The dimmer and trimmer states are found.     

In situ functionalized self-assembled monolayer surfaces for selective chemical vapor deposition of copper

Recent studies show that the self-assembled monolayer (SAM) is well suited to control the selectivity of chemical vapor deposition (CVD). Here, we reported the selective CVD for copper on the functionalized SAM surfaces (with -SH, -SS-, and -SO₃H terminal groups). The -SS- and -SO₃H terminal group surfaces were obtained through in situ chemical transformation of -SH terminal group surface of a 3-mercaptopropyltrimethoxysilane-SAM (MPTMS-SAM). As a result, the -SS- terminal group surface reduces copper deposition and the -SO₃H terminal group surface enhances copper deposition comparing to the -SH terminal group surface. In addition, the MPTMS-SAM was irradiated by UV-light through a photo mask to prepare SH-group and OH-group regions. Then, copper films were deposited only on the SH-group region of the substrate in chemical vapor deposition. Finally, patterns of copper films were formed in the way of UV-light irradiation. These results are expected for use of selective deposition of copper metallization patterns in IC manufacturing processes.     

The structure and optical characters of the ZnO film grown on GaAs/Al2O3 substrate

In this paper ZnO films are grown on GaAs/Al₂O₃ substrates at different temperature by metal-organic chemical vapor deposition (MOCVD). The GaAs/Al₂O₃ substrates are formed by depositing GaAs layer (∼35 nm) on the Al₂O₃ substrate. The results of X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) demonstrate that most of the Ga and As atoms form Ga-As bond and the GaAs layer does not present any orientation. The characters of the ZnO films grown on GaAs/Al₂O₃ substrates are investigated by XRD, photoluminescence (PL), atomic force microscopy (AFM) and Raman scattering. Compared with ZnO film grown on Al₂O₃ substrate, ZnO film prepared by our fabrication scheme has good crystal and optical quality. Meanwhile its grain size becomes bigger according to the AFM image. Raman analysis indicates that the intrinsic defects and the in-plane tensile stress are obviously reduced in ZnO/GaAs/Al₂O₃ samples.     

光纤分布式测温系统中基于迭代法的高准确度温度解调算法

提出了一种利用喇曼散射原理的光纤分布式测温系统中基于迭代的高准确度温度解调算法.针对于常规的反斯托克斯-斯托克斯双光路比值的温度解调算法,该迭代算法进一步校正了光纤中双光路衰减系数差对温度敏感带来的温度测量误差,尤其适用于中距离且温度场复杂的测温环境,实现了高准确度的温度测量.通过理论分析确定了该迭代法的迭代格式,测量了相应的光纤参量,并在传感样机上编写相应的代码通过实验予以验证,在0～90℃温度范围,5km测量长度输出的测温曲线符合预期的测温效果.     

Eu掺杂SiO2纳米基质的发光特性

采用溶胶-凝胶(sol-gel)法制备了Eu掺杂的SiO₂干凝胶,分别用光致发光(PL)光谱、透射电镜(TEM)、扫描电镜(SEM)、红外吸收(IR)谱等分析手段对样品进行了表征,研究了SiO₂的基质中Eu³⁺、Eu²⁺的发光特性以及退火温度对发射光谱的影响,并对其发光机理进行了分析。结果表明,样品掺杂均匀,颗粒尺寸大约在50~80 nm,硼(B)离子进入SiO₂网格,成为了基质的一部分,改变了基质的网络结构。当采用258 nm激发样品时,随着退火温度的升高,红光发射强度先增强后减弱。对于经800 ℃退火处理的样品红光发射最强,出现了576 nm(⁵D₀ →⁷F₀),620 nm(⁵D₀ →⁷F₂),658 nm(⁵D₀ →⁷F₃)3条谱线,其中主峰位于 620 nm红光发射,对应于Eu³⁺离子的⁵D₀ →⁷F₂超灵敏跃迁,进一步说明B离子参与到基质中,形成了Si—O—B键,导致Eu³⁺离子所处配位环境的对称性降低,从而有利于Eu³⁺离子的特征发射;当采用271 nm激发样品时,随着退火温度的升高,蓝光发射强度先增强后减弱,经850 ℃退火的样品400~500 nm蓝光发射最强,归属于Eu²⁺的5d→4f的跃迁发射,证明在铝离子(Al³⁺)存在的情形下,在高温退火过程中Al³⁺部分取代Si⁴⁺形成AlO^-₄基团,掺杂Eu³⁺填补AlO^-₄基团附近的空位,增加了Eu³⁺周围的AlO^-₄四面体中氧原子的电子给予能力,使得Eu³⁺还原成Eu²⁺,从而得到了较强的蓝光发射。但是,当退火温度达到900 ℃时,由于稀土离子发生位置的迁移形成团簇红光和蓝光都明显地降低。