Novel UV‐induced photografting process for preparing poly(tetrafluoroethylene)‐based proton‐conducting membranes

A novel process comprising the UV‐induced photografting of styrene into poly(tetrafluoroethylene) (PTFE) films and subsequent sulfonation has been developed for preparing proton‐conducting membranes. Although under UV irradiation the initial radicals were mainly generated on the surface of the PTFE films by the action of photosensitizers such as xanthone and benzoyl peroxide, the graft chains were readily propagated into the PTFE films. The sulfonation of the grafted films was performed in a chlorosulfonic acid solution. Fourier transform infrared and scanning electron microscopy were used to characterize the grafted and sulfonated membranes. With a view to use in fuel cells, the proton conductivity, water uptake, and mechanical properties of the prepared membranes were measured. Even through the degree of grafting was lower than 10%, the proton conductivity in the thickness direction of the newly prepared membranes could reach a value similar to that of a Nafion membrane. In comparison with γ‐ray radiation grafting, UV‐induced photografting is very simple and safe and is less damaging to the membranes because significant degradation of the PTFE main chains can be avoided. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2624–2637, 2007     

The study of lithium fast ion conductors of Li3xLa0.67−xScyTi1−2yNbyO3 system

Perovskite-type lithium fast ion conductors of Li_3xLa_0.67−xSc_yTi_1−2yNb_yO₃ system were prepared by solid state reaction. X-Ray powder diffraction shows that perovskite solid solution form in the ranges of x=0.10, y≤0.10. AC impedance measurements indicate that the bulk conductivities and the total conductivities are of the order of 10⁻⁴ S·cm⁻¹ and 10⁻⁵ S·cm⁻¹ at 25 °C respectively. The compositions have low bulk activation energies of about 17 kJ/mol in the temperature ranges of 298 – 523 K and total activation energies of about 37 kJ/mol in the temperature ranges of 298 – 523 K.     

Effect of end groups on complexation kinetics between cyclodextrins and guest polymers

α‐Cyclodextrin (α‐CD) has been complexed with various poly(ethylene glycol) (PEG) derivatives in aqueous solution. It has been found that the end groups of PEG derivatives affect the complexation kinetics greatly, but have only a little influence on the thermodynamic behavior. By increasing the hydrophobicity of end groups, the complexation speeds up rapidly. On the other hand, the bulky end groups slow down the threading of polymeric guests into the cavity of CD. By changing the hydrophobicity and the size of end groups, the complexation rate can be adjusted in the range of several orders of magnitudes, which should be quite useful in the design of new supramolecular systems. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2050–2057, 2006     

Matrix model in a class of time dependent supersymmetric backgrounds

We discuss the matrix model in a class of 11D time dependent supersymmetric backgrounds as obtained in [B. Chen, Phys. Lett. B 632 (2006) 393, hep-th/0508191]. We construct the matrix model action through the matrix regularization of the membrane action in the background. We show that the action is exact to all orders of fermionic coordinates. Furthermore we discuss the fuzzy sphere solutions in this background.     

Degradation of ZnS:Cu,Al,Au phosphor powder in different gas mixtures

The ZnS:Cu,Al,Au (P22G) phosphor powder was bombarded by an electron beam in an O₂ ambient, Ar ambient and other mixture of gases. These gases consisted of mixtures of O₂ and CO_x, and O₂, CO_x and Ar gas. Auger electron spectroscopy (AES) was used to monitor changes in the surface composition of the P22G phosphor during electron bombardment. When the P22G phosphor powder was exposed to the electron beam in a water-rich O₂ ambient, a chemically limited ZnO layer was formed on the surface. The electron beam degradation of the P22G phosphor powder was also performed in a dry O₂ ambient and a layer of ZnSO₄ was formed on the surface. The ZnSO₄ formation decayed exponentially with time and it is postulated that this was due to the diffusion of the charge reactants through the ZnSO₄ film to the reaction interfaces. The P22G phosphor exposed to the electron beam in an Ar ambient and to the other gas mixtures degraded at a lower rate than in the case of the O₂ ambient. This suggests that Ar and CO_x may suppress the degradation of the P22G phosphor powder.     

Molecular dynamics simulation of thermodynamic properties of NaCl at high pressures and temperatures

The expansivity, constant-pressure heat capacity, and isothermal bulk modulus of sodium chloride (NaCl) have been obtained by using molecular dynamics method. The calculated thermodynamic parameters are found to be in agreement with the available experimental data. At an extended temperature and pressure ranges, these parameters have also been predicted. The thermodynamic properties of NaCl are summarized in the pressure 0-500 kbar ranges and the temperature up to 1000 K.     

单圈图的最大特征值序

主要讨论了单圈图按其最大特征值进行排序的问题，确定了该序的前六个图。     

The Characterisitic of Proton-Exchanged LiNbO3 Waveguide Formed by Different Proton Source

Benzoic acid as a source of proton is widely used in the technology of manufacture of proton exchanged ( PE) waveguide .But the diffusing speed of proton is too fast to make the waveguide stable in the pure benzoic acid. The characteristic of waveguide is improved with mixture of benzoic acid and lithium benzoate .     

Comment on “A Hierarchy of Integrable Nonlinear Lattice Equations and New Integrable Symplectic Map“

Comment on a recent paper on Commun. Theor. Phys. (Beijing, China) 38 (2002) pp. 523-528.     

On integers of the forms k−2 and k2+1

In this paper we prove that if (r,12)?3, then the set of positive odd integers k such that k^r−2ⁿ has at least two distinct prime factors for all positive integers n contains an infinite arithmetic progression. The same result corresponding to k^r2ⁿ+1 is also true.