Simultaneous determination of polycarboxylic acids by capillary electrophoresis with a copper electrode

The simultaneous determination of polycarboxylic acids including oxalic acid, citric acid, malonic acid, malic acid, tartaric acid, aspartic acid and glutamic acid was achieved by capillary electrophoresis with a copper disk electrode (d = 200 microm). In the system. 0.2 mmol/l cetylpridinium bromide (CPB) was used as an electroosmotic flow (EOF) modifier to reverse the direction of EOF. The effects of the solution pH and CPB concentration on separation were evaluated to achieve the optimum separation conditions. At the working potential of +0.14 V (vs. saturated calomel electrode), the calibration curves for all polycarboxylic acids studied were linear with 2 approximately 3-orders of magnitude and all the detection limits (S/N = 3) were below 15 fmol except malonic acid. Furthermore, the oxalic and citric acids in urine were successfully separated and determined with high sensitivity.     

A convenient catalytic approach to synthesize straight boron nitride nanotubes using synergic nitrogen source

Straight boron nitride nanotubes (BNNTs) with pure hexagonal phase were conveniently prepared by heating the mixture of Mg(BO₂)₂ · H₂O, NH₄Cl, NaN₃ and Mg powder in an autoclave at 600 °C for 20–60 h. These BNNTs had diameters mainly ranging 30–300 nm and lengths up to 5 μm, and a majority of them had at least one closed end. Besides the traditional end tips, additional cone-like tips were frequently found to be attached on the BNNTs. The effects of temperature, reactants and the possible mechanism of the catalytic formation of the BNNTs are discussed.     

Low-dimensional hybrid copper halides with novel D6R Cu(6)I(6) cores

Two low-dimensional hybrid copper halides, (2,2'-bipy)Cu(3)I(3) (1) and (2,2'-bipy)Cu(4)I(4) (2) (2,2'-bipy = 2,2'-bipyridine), with novel D6R (double six-membered rings) Cu(6)I(6) cores were synthesized by hydro(solvo)thermal reactions and characterized by single-crystal X-ray diffraction.     

Structure of microparticles in solid-stabilized emulsions

Emulsions of oil and water stabilized by adsorbed solid particles are known as solid-stabilized emulsions (often referred to as Pickering emulsions). Using confocal microscopy, we have studied the assembly of colloidal-sized polystyrene particles in poly(dimethylsiloxane)-in-water solid-stabilized emulsions. Monodisperse polystyrene particles, when included in the emulsions at low concentrations, were found to form small patches with local "hexagonal" order, separated by other particle-free domains. Polystyrene particles with different sizes (1 and 4 microm) and different wettability could simultaneously segregate to the emulsion interface; even mixtures of hydrophobic and hydrophilic solid particles were found to simultaneously segregate to the same interface.     

Investigation of ultraviolet curable waterborne polyurethane acrylate dispersion based on hydroxyl-terminated polybutadiene

A new kind of ultraviolet (UV) curable waterborne polyurethane acrylate dispersion was synthesized based on hydroxyl-terminated polybutadiene (HTPB), poly-(propylene glycol) (PPG), isophorene diisocyanate (IPDI), 2-hydroxy ethyl acrylate (HEA) and dimethylol propionic acid (DMPA) after neutralizing by triethylamine (TEA). 2-Hydroxy-1-[4-2-hydroxyethoxy) phenyl]-2-methyl-1-propanone (Irgacure 2959) was used as a photoinitiator and deionized water as a diluent. Fourier transform infrared (FTIR) analysis was used to identify the chain structure of the UV-curable polyurethane prepolymer based on HTPB and the curing process. Effects of relative content of HTPB and PPG on emulsion stability, resistance to water and ethanol, thermal stability, compatibility of soft and hard segment, as well as the mechanical property of the cured film were investigated. Translated from Polymer Materials Science and Engineering, 2006, 22(3): 199–203 (in Chinese)     

New synthesis of two optically active steroid CD ring synthons by microbial asymmetric reduction

Two optically active steroid CD ring synthons 4 and 19 were synthesized from 11 obtained by the microbial asymmetric reduction of a pro-chiral trione 10 which could be efficiently prepared by the reaction of a new annelating reagent 9 with 2-ethyl-cyclopentane-1, 3-dione.     

WATER STATES IN SBR BASED WATER SWELLING RUBBER

Water swelling rubber (WSR) was prepared by reaction blending SBR andsodium polyacrylate (PAANa). The existing states of water in the WSR was studied bymeans of DSC and TG. It was found that water exists in three states: nonfreezing water,bound freezable water and free water. The relationships between water states and structureof PAANa were investigated. The results showed that the amount of non-freezing waterwas related to total water content, and the ratio of non-freezing water versus -COONagroups on PAANa (mol/mol) was about 4. However, total water content slightly affectedthe content of bound freezable water and remarkably affected the amount of free waer.     

Lewis acid-catalyzed formation of Ugi four-component reaction product from Passerini three-component reaction system without an added amine

In the presence of a Lewis acid the phenol-Passerini three-component reaction (phenol-P-3CR) system is found to deliver a product of the phenol-Ugi four-component reaction (phenol-U-4CR). It is the first demonstration of an isocyanide as an amine equivalent in isocyanide-based multicomponent reactions (IMCRs). In general, by using Ti(O-i-Pr)₄ in MeOH both phenol-U-4CR and U-4CR products are synthesized from an aromatic aldehyde, a phenolic or carboxylic acid, and an isocyanide. Moreover, by using MeCN as the solvent, the phenol-P-3CR products can be obtained in good yields without contamination of the phenol-U-4CR products.     

含超价硫三元无机杂环化合物的理论研究(Ⅰ)

本文应用ab initio方法,研究了含超价硫化合物分子中硫原子的3d轨道的成键作用,并使用Martagh-Sargent梯度优化法,预测了该化合物的几何构型。指出硫二氮三元无机杂环中,d-pπ键在S-N间起重要作用。     

Analysis of the Electron Localization, the Anisotropy of Electrical Conductivity, the Orbital Ordering, and Spin-Exchange Interactions in BaVS3 on the Basis of First Principles and Semi-empirical Electronic Structure Calculations

The electrical transport and magnetic properties of BaVS₃, made up of individual VS₃ octahedral chains, were examined on the basis of first principles and tight-binding electronic structure calculations. The electrical conductivity of BaVS₃ is nearly isotropic despite its one-dimensional structural feature, because of the orbital interactions associated with the short S···S contacts within each VS₃ chain and between adjacent VS₃ chains. The probable cause for the metal-insulator transition at ∼70 K was examined in terms of first principles electronic structure calculations, which indicate that the metallic and magnetic insulating states of BaVS₃ are nearly the same in energy. This is consistent with the observation that the metal-insulator transition at ∼70 K is caused by electron localization. The observed magnetic properties of BaVS₃ below ∼70 K are readily explained under the assumption that the symmetry-broken t_2g-orbitals act as the magnetic orbitals in the magnetic insulating state of BaVS₃. The probable cause for the latter was discussed.