Development of a competitive format sorbent assay for the determination of parathion in water using molecular imprinted polymer as specific sorbent carrier

<正>A rapid,simple,and reliable competitive molecular imprinted polymer sorbent assay(MIPSA) was developed and validated for measurement of parathion in water samples.This assay employed a molecular imprinted polymer(MIP) that was synthesized with non-covalent imprinting method as capture reagent and p-aminoparathion conjugate of horseradish peroxidase(para-HRP) as an enzyme label.The assay depended on a competitive binding reaction between the enzyme conjugate and analyte for the binding sites of the MIP.The optimized analysis conditions of 10 ng mL~(-1) para-HRP and 10 mg mL~(-1) polymer were found.The assay was acceptable to detect parathion in water samples under the optimized conditions,with a limit of detection of 50 ng mL~(-1).Mean analytical recoveries of added parathion in water samples ranged from 101.2%to 105%.The precision of the assay was satisfactory; relative standard deviation ranged from 4.3%to 6%.     

Synthesis and antibacterial activity of C-2(S)-substituted pleuromutilin derivatives

<正>In order to probe the effect of C-2(S)-substituted groups in the antibacterial activity,a series of novel C-2(S)-substituted pleuromutilin analogues of SB-225586 were synthesized and evaluated for their in vitro antibacterial activity.The results of antibacterial activities indicated that C-2(S)-substituted pleuromutilin derivatives retained appreciable antibacterial activity,and the 2-fluorination compounds 6a and 6b are more potent than the corresponding 2-hydroxylation analogues 7a and 7b.     

Catalytic performance of iron carbide for carbon monoxide hydrogenation

Novel iron carbide and potassium-promoted iron carbide catalysts were prepared and investigated for CO hydrogenation. The iron carbide showed high activity for CO hydrogenation under high pressures; with the addition of potassium, activity and selectivity to C5+ hydrocarbons were greatly enhanced, and the selectivity to methane was suppressed.     

微波辐射溶剂提取-分光光度法测定农吉利中的总黄酮

采用微波辐射溶剂法提取农吉利中的总黄酮。研究了微波功率、微波辐射时间、提取溶剂用量、提取温度、提取时间等实验条件。以牡荆素作为目标物表征,利用UV法测定了提取液中总黄酮。实验结果表明:与常规溶剂回流提取相比,在相同的提取条件下用微波辐射处理药材后再进行提取,其提取率明显提高,山东和广西样品中总黄酮的提取率分别提高48.3%和23.2%。该方法的加标回收率为94.2%~105.5%,重复测定结果的相对标准偏差为1.1%(n=6)。该法用于农吉利中总黄酮的提取和测定,处理方法简单,测定结果可靠。     

野菊花中蒙花苷的提取及其含量的测定

以乙醇为溶剂,采用溶剂回流提取方法结合微波、超声波辅助提取野菊花中的蒙花苷,用HPLC法测定。采用正交试验法研究了野菊花中蒙花苷提取和HPLC实验条件,并比较了采用不同的微波和超声波辅助提取方式对蒙花苷提取结果的影响。结果表明,溶剂回流提取最佳条件为:提取温度80℃,回流时间2.0 h,溶剂用量40 mL。应用于安徽等产地野菊花中蒙花苷的提取分析,结果显示,广东和广西产地药材含量明显更高;在相同的实验条件下采用微波辅助提取可使蒙花苷达到较高的提取率,特别是采用微波辐射药材后再进行溶剂回流提取,提取时间可缩短一半。     

Simple, efficient and recyclable catalytic system for performing copper-catalyzed C-S coupling of thiols with aryl iodides in PEG and PEG-H2O

A new protocol for the coupling of aryl iodides with thiophenols or alkanethiols is reported. The reaction is catalyzed by CuI-PEG or CuI-PEG-H₂O system in the absence of ligands and volatile organic solvents. A variety of functionalized aryl sulfides are prepared in excellent yields. The isolation of the products is readily performed by the extraction with diethyl ether or petroleum ether, and the CuI-PEG catalyst can be reused without significant loss in activity. The simple catalytic system is economically competitive and environmentally friendly.     

Structure elucidation and NMR assignments for two amide alkaloids from a Mangrove endophytic Fungus (No. ZZF-22)

The structure elucidations and complete (1)H and (13)C NMR assignments are reported for two new natural products: 3-benzylidene-8,8a-dihydroxy-2-methyl-hexahydro-pyrrolo[1,2-a]pyrazine-1,4-dione(1) and 4-hydroxy-6-(hydroxy-phenyl-methyl)-N-(3-methyl-butyryl)-nicotinamide (2). Both of these secondary metabolites were isolated from the fermentation medium of a Mangrove endophytic fungus. High resolution electron impact mass spectrometry (HREIMS), FT-IR Spectroscopy and NMR experiments including gCOSY, gHMQC, gHMBC and NOE were used for determination of the structures and assignments of the amide alkaloids.     

Preparation of alumina nanowires, nanorods, and nanowalls by chemical etching

Alumina (Al₂O₃) nanowires, nanorods, and nanowalls have been prepared from anodic aluminum oxide (AAO) templates by chemical etching in NaOH solution. Heating the template prior to etching is crucial to the morphology of subsequent prepared alumina nanostructures, which greatly depend on the phases of the AAO templates. It has been found that the templates with amorphous Al₂O₃, γ-Al₂O₃, and α+γ-Al₂O₃ phases will grow nanowires, nanorods, and nanowalls, respectively. A possible mechanism for forming different alumina nanostructures is proposed.     

类特异性分子印迹聚合物微球的识别机理及其光谱学研究

以氯磺隆为模板分子,甲基丙烯酸二乙氨基乙酯为功能单体,三甲氧基丙烷三甲基丙烯酸酯为交联剂,乙腈为致孔剂,在60℃温度下,采用热引发沉淀聚合方法制备了一种能同时吸附氯磺隆、噻吩磺隆、单嘧磺隆的类特异性分子印迹微球,并运用紫外光谱、红外光谱法等手段对其识别机理进行研究。结果表明,该聚合物微球对氯磺隆及其分子结构类似物噻吩磺隆、单嘧磺隆具有类特异性吸附能力,同时揭示了分子印迹微球是通过氢键作用特异性地识别模板分子及其类似物。